![[Index]](../../../../a_stock/btn_index_wt.gif){kind=small}
![[Spacer]](../../../../a_stock/btn_spacer.gif){kind=small}
![[Previous]](../../../../a_stock/btn_prev_wt.gif){kind=small}
![[Next]](../../../../a_stock/btn_next_wt.gif){kind=small}
|
|
|
|
|
|
||
Location:
bt_subscribe.h
const TUid KPropertyUidBluetoothCategory;
KPropertyUidBluetoothCategory This is a deprecated constant, maintained for source compatibility with non-secured Symbian OS platforms.
const TUid KPropertyUidBluetoothControlCategory;
KPropertyUidBluetoothControlCategory This is a deprecated constant, maintained for source compatibility with non-secured Symbian OS platforms.
const TUint KPropertyKeyBluetoothGetLocalDeviceAddress;
KPropertyKeyBluetoothGetLocalDeviceAddress The key to observe the device address of the local Bluetooth hardware The P&S value will contain a descriptor of the device address
const TUint KPropertyKeyBluetoothLocalDeviceAddress;
KPropertyKeyBluetoothLocalDeviceAddress This is a deprecated constant, maintained for source compatibility with non-secured Symbian OS platforms.
const TUint KPropertyKeyBluetoothGetPHYCount;
KPropertyKeyBluetoothGetPHYCount The key to observe the the number of Bluetooth physical links attached to the local device The P&S value will contain the number of physical links
const TUint KPropertyKeyBluetoothPHYCount;
KPropertyKeyBluetoothPHYCount This is a deprecated constant, maintained for source compatibility with non-secured Symbian OS platforms.
const TUint KPropertyKeyBluetoothGetConnectingStatus;
KPropertyKeyBluetoothGetConnectingStatus The key to observe whether the local device is paging another device (i.e. is connecting a physical link) The P&S value will contain a boolean: ETrue if connecting, otherwise EFalse
const TUint KPropertyKeyBluetoothConnecting;
KPropertyKeyBluetoothConnecting This is a deprecated constant, maintained for source compatibility with non-secured Symbian OS platforms.
const TUint KPropertyKeyBluetoothGetScanningStatus;
KPropertyKeyBluetoothGetScanningStatus The key to observe what scans the Bluetooth hardware is currently performing The P&S value contains an integer with the scan value as published in the Bluetooth Core Specification
The use of this key is equivalent in a secure Symbian OS platform to the use of the key KPropertyKeyBluetoothScanning with the category KPropertyUidBluetoothCategory in a non-secure Symbian OS platform.
const TUint KPropertyKeyBluetoothSetScanningStatus;
KPropertyKeyBluetoothSetScanningStatus The key to control what scans the Bluetooth hardware is currently performing The P&S value contains an integer with the scan value as published in the Bluetooth Core Specification
The use of this key is equivalent in a secure Symbian OS platform to the use of the key KPropertyKeyBluetoothScanning with the category KPropertyUidBluetoothControlCategory in a non-secure Symbian OS platform.
const TUint KPropertyKeyBluetoothGetLimitedDiscoverableStatus;
KPropertyKeyBluetoothGetLimitedDiscoverableStatus The key to observe whether the local device is in Limited Discoverable mode The P&S value will contain a boolean: ETrue if in limited discoverable mode, otherwise EFalse
The use of this key is equivalent in a secure Symbian OS platform to the use of the key KPropertyKeyBluetoothLimitedDiscoverable with the category KPropertyUidBluetoothCategory in a non-secure Symbian OS platform.
const TUint KPropertyKeyBluetoothSetLimitedDiscoverableStatus;
KPropertyKeyBluetoothSetLimitedDiscoverableStatus The key to control whether the local device is in Limited Discoverable mode The P&S value will contain a boolean: ETrue if in limited discoverable mode, otherwise EFalse
The use of this key is equivalent in a secure Symbian OS platform to the use of the key KPropertyKeyBluetoothLimitedDiscoverable with the category KPropertyUidBluetoothControlCategory in a non-secure Symbian OS platform.
const TUint KPropertyKeyBluetoothGetDeviceClass;
KPropertyKeyBluetoothGetDeviceClass The key to observe the class of device of the local device The P&S value will contain an integer of the local device class.
The use of this key is equivalent in a secure Symbian OS platform to the use of the key KPropertyKeyBluetoothDeviceClass with the category KPropertyUidBluetoothCategory in a non-secure Symbian OS platform.
const TUint KPropertyKeyBluetoothSetDeviceClass;
KPropertyKeyBluetoothSetDeviceClass The key to set the class of device of the local device The P&S value will contain an integer of the local device class.
The use of this key is equivalent in a secure Symbian OS platform to the use of the key KPropertyKeyBluetoothDeviceClass with the category KPropertyUidBluetoothControlCategory in a non-secure Symbian OS platform.
const TUint KPropertyKeyBluetoothSetAFHHostChannelClassification;
KPropertyKeyBluetoothSetAFHHostChannelClassification The key to send an AFH Host Channel Classification to the local Bluetooth hardware The P&S value will contain a descriptor containing the AFH Host Channel Classification bit set. A bit which is set to zero instructs the local Bluetooth hardware not to hop to the frequency represented by that bit in a connection in which it is master and which is using AFH. Also, if the local Bluetooth hardware is slave in a connection, which is using AFH, an AFH Host Channel Classification may be used to advise the remote master what frequencies to avoid.
NB. THIS IS SUPPORTED ONLY IN VERSION 9.0 AND THEREAFTER. The same functionality can be accessed in 8.1 also through the use of the KPropertyKeyBluetoothAFHHostChannelClassification key in conjunction with category KPropertyUidBluetoothControlCategory.
const TUint KPropertyKeyBluetoothAFHHostChannelClassification;
KPropertyKeyBluetoothAFHHostChannelClassification This is a deprecated constant, maintained for source compatibility with non-secured Symbian OS platforms.
const TUint KPropertyKeyBluetoothGetRegistryTableChange;
KPropertyKeyBluetoothGetRegistryTableChange The key to observe changes in the Bluetooth Registry The P&S value will contain an integer describing which of the tables in the Bluetooth Registry changed see further in this header file
const TUint KPropertyKeyBluetoothRegistryTableChange;
KPropertyKeyBluetoothRegistryTableChange This is a deprecated constant, maintained for source compatibility with non-secured Symbian OS platforms.
const TUint KPropertyKeyBluetoothGetDeviceName;
KPropertyKeyBluetoothGetDeviceName The key to observe the name of device of the local device The P&S value will be of type
EText and contain the local device name in Unicode. At all times the name must have a length <= KHCILocalDeviceNameMaxLength
(defined in hciconsts.h).
const TUint KPropertyKeyBluetoothSetDeviceName;
KPropertyKeyBluetoothSetDeviceName The key to set the name of device of the local device The P&S value will be of type EText
and contain the local device name in Unicode. At all times the name must have a length <= KHCILocalDeviceNameMaxLength (defined
in hciconsts.h).
const TUint KPropertyKeyBluetoothGetCorruptRegistryResetIndication;
KPropertyKeyBluetoothGetCorruptRegistryResetIndication This key is intended to be used by the UI to be informed when a corrupt Bluetooth registry has been detected so that the UI can inform the user that all of the pairings they have made have been lost.
The P&S value will either be 0 or give the tick count, as given by User::TickCount(), at the time which the corrupt Bluetooth Registry has been restored or replaced. If the key is 0 this means that the Bluetooth
registry has not been found to be corrupt since the device was turned on.
const TUint KPropertyKeyBluetoothCorruptRegistryReset;
KPropertyKeyBluetoothCorruptRegistryReset This is a deprecated constant, maintained for source compatibility with non-secured Symbian OS platforms.
const TUint KPropertyKeyBluetoothGetAcceptPairedOnlyMode;
KPropertyKeyBluetoothGetAcceptPairedOnlyMode This key is intended to be used by the UI to discover whether a device will accept all connections or only paired ones. The P&S value will contain a boolean: ETrue - the stack will only to accept connection requests from paired devices. EFalse - the stack will accept connection requests from both paired and unpaired devices.
const TUint KPropertyKeyBluetoothSetAcceptPairedOnlyMode;
KPropertyKeyBluetoothSetAcceptPairedOnlyMode The key to set the mode for handling connection requests The P&S value will contain a boolean: ETrue - the user wishes ONLY to accept connection requests from paired devices. EFalse - the user wishes to accept connection requests from both paired and unpaired devices.
const TUint KPropertyKeyBluetoothHostResolverActive;
KPropertyKeyBluetoothHostResolverActive The key is intended to be used by the UI to discover whether the device is attempting to do a discovery If the device is attempting a discovery activities such as streaming of AV data will be affected The P&S value will contain a boolean: ETrue - the stack is attempting a discovery/discovery+rnr EFalse - the stack is curently not attempting a discovery
|
Copyright ©2008 Symbian Software Ltd. |
|
![[Top]](../../../../a_stock/arrow_up_2.gif){kind=icon}
![[Previous]](../../../../a_stock/btn_prev.gif){kind=small}
![[Top]](../../../../a_stock/btn_top.gif)
![[Next]](../../../../a_stock/btn_next.gif){kind=small}