CMManager Namespace Reference


Enumerations
enum	TCmSettingSelectionMode { EAlwaysAsk, EDestination, EConnectionMethod, EDefaultConnection }
	The selection type of a list item in application settings UI. More...
enum	TCmSelectionDialogItems { EShowAlwaysAsk = 0x01, EShowDefaultConnection = 0x02, EShowDestinations = 0x04, EShowConnectionMethods = 0x08 }
	These bitmasks controls what items does the selection UI containes. More...
enum	TNamingMethod { ENamingNothing, ENamingUnique, ENamingNotAccept }
	Naming method options. More...
enum	TIPv6Types { EIPv6Unspecified, EIPv6WellKnown, EIPv6UserDefined }
enum	TSeamlessnessValue { ESeamlessnessNotRoamedTo, ESeamlessnessConfirmFirst, ESeamlessnessShowprogress, ESeamlessnessFullySeamless }
enum	TConnectionMethodCommonAttributes { ECmCoverage, ECmDefaultPriority, ECmDestination, ECmBearerHasUi, ECmIPv6Supported, ECmDefaultUiPriority, ECmBearerIcon = 100, ECmBearerAvailableIcon, ECmBearerAvailableName = 200, ECmBearerSupportedName, ECmBearerAvailableText, ECmBearerNamePopupNote, ECmCommsDBBearerType, ECmBearerSettingName, ECmVirtual, ECmInvalidAttribute = 400, ECmAddToAvailableList, ECmLoadResult, ECmBearerType = 500, ECmName, ECmIapId, ECmStartPage, ECmHidden, ECmProtected, ECmNamingMethod, ECmSeamlessnessLevel, ECmElementID, ECmNetworkId, ECmConnected, ECmId, ECmWapId, ECmIapServiceId, ECmMetaHighlight = 600, ECmMetaHiddenAgent, ECmNextLayerIapId, ECmNextLayerSNAPId, ECmProxyUsageEnabled = 1000, ECmProxyServerName, ECmProxyProtocolName, ECmProxyPortNumber, ECmProxyExceptions, ECmProxyRangeMax = 1999, ECmChargeCardUsageEnabled = 2000, ECmChargeCardAccountNumber, ECmChargeCardPIN, ECmChargeCardLocalRule, ECmChargeCardNatRule, ECmChargeCardIntlRule, ECmChargeCardRangeMax = 2999, ECmLocationUsageEnabled = 3000, ECmLocationIntlPrefixCode, ECmLocationNatPrefixCode, ECmLocationNatCode, ECmLocationAreaCode, ECmLocationDialOutCode, ECmLocationDisableCallWaitingCode, ECmLocationMobile, ECmLocationUsePulseDial, ECmLocationWaitForDialTone, ECmLocationPauseAfterDialOut, ECmLocationRangeMax = 3999, ECmWapIPGatewayAddress = 4000, ECmWapIPWSPOption, ECmWapIPSecurity, ECmWapIPProxyPort, ECmWapIPProxyLoginName, ECmWapIPProxyLoginPass, ECmWapRangeMax = 4099, ECmCommonAttributesStart = 5000, ECmIFName, ECmIFParams, ECmIFNetworks, ECmIFPromptForAuth, ECmIFAuthName, ECmIFAuthPass, ECmIFAuthRetries, ECmIPNetmask = 5050, ECmIPGateway, ECmIPAddFromServer, ECmIPAddress, ECmIPDNSAddrFromServer, ECmIPNameServer1, ECmIPNameServer2, ECmIP6DNSAddrFromServer, ECmIP6NameServer1, ECmIP6NameServer2, ECmIPAddrLeaseValidFrom, ECmIPAddrLeaseValidTo, ECmConfigDaemonManagerName = 5100, ECmConfigDaemonName, ECmEnableLPCExtension = 5110, ECmDisablePlainTextAuth, ECmCommonAttributesEnd = 5999, ECmSpecialAttributes = 6000, ECmIsLinked, ECmSpecialAttributesEnd = 8999 }
	This enum lists all the common attributes of Connection Methods. More...
enum	TWapWSPOption { ECmWapWspOptionConnectionless, ECmWapWspOptionConnectionOriented }
	WAP WSP options. More...
enum	TSnapMetadataField { ESnapMetadataInternet = 0x00000001, ESnapMetadataHighlight = 0x00000002, ESnapMetadataHiddenAgent = 0x00000004, ESnapMetadataDestinationIsLocalised = 0x000000F0, ESnapMetadataPurpose = 0x00000F00 }
	Metadata items. More...
enum	TLocalisedDestinations { ENotLocalisedDest = 0x00000000, ELocalisedDestInternet = 0x00000001, ELocalisedDestWap = 0x00000002, ELocalisedDestMMS = 0x00000003 }
	This is the enum set of the TSnapMetadataField's ESnapMetadataDestinationIsLocalised. More...
enum	TSnapPurpose { ESnapPurposeUnknown = 0x00000000, ESnapPurposeInternet = 0x00000001, ESnapPurposeOperator = 0x00000002, ESnapPurposeMMS = 0x00000003, ESnapPurposeIntranet = 0x00000004 }
	This is the enum set of the TSnapMetadataField's ESnapMetadataPurpose. More...
enum	TProtectionLevel { EProtLevel0 = 0, EProtLevel1 = 1, EProtLevel2 = 2, EProtLevel3 = 3 }
	Protection Levels. More...
enum	TCmCallType { ECmCallTypeAnalogue, ECmCallTypeISDNv110, ECmCallTypeISDNv120 }
	These enums are used to represent the conn. More...
enum	TCmCallSpeed { ECmSpeedAutobaud = 0x00000000, ECmSpeed9600 = 0x00000001, ECmSpeed14400 = 0x00000002, ECmSpeed19200 = 0x00000003, ECmSpeed28800 = 0x00000004, ECmSpeed38400 = 0x00000005, ECmSpeed43200 = 0x00000006, ECmSpeed56000 = 0x00000007 }
	These enums are used to represent the connection speed. More...
enum	TConnectionMethodCsdHscsdCommonAttributes { EPluginDialAttribStart = 10000, EDialOut = 10001, EDialCallType = 10002, EDialMaxConnSpeed = 10003, EDialDescription = 10100, EDialType = 10101, EDialDefaultTelNum = 10102, EDialDialResolution = 10103, EDialChargeCard = 10104, EDialUseLoginScript = 10105, EDialLoginScript = 10106, EDialAuthentication = 10107, EDialPromptForLogin = 10108, EDialLoginName = 10109, EDialLoginPassword = 10110, EDialDisplayPCT = 10111, EDialIFParams = 10112, EDialIFNetworks = 10113, EDialIFPromptForAuth = 10114, EDialIFAuthName = 10115, EDialIFAuthPass = 10116, EDialIFAuthRetries = 10117, EDialIFCallbackEnabled = 10118, EDialIFCallbackType = 10119, EDialIFCallbackInfo = 10120, EDialCallbackTimeout = 10121, EDialIFServerMode = 10122, EDialIPAddressFromServer = 10123, EDialIPAddress = 10124, EDialIPNetmask = 10125, EDialIPGateway = 10126, EDialIPDNSAddressFromServer = 10127, EDialIPNameServer1 = 10128, EDialIPNameServer2 = 10129, EDialIP6DNSAddressFromServer = 10130, EDialIP6NameServer1 = 10131, EDialIP6NameServer2 = 10132, EDialIPAddressLeaseValidFrom = 10133, EDialIPAddressLeaseValidTo = 10134, EDialConfigDaemonManagerName = 10135, EDialConfigDaemonName = 10136, EDialEnableIPHeaderComp = 10137, EDialEnableLCPExtension = 10138, EDialDisablePlainTextAuth = 10139, EDialEnableSWComp = 10140, EDialBearerName = 10141, EDialBearerSpeed = 10142, EDialBearerCE = 10143, EDialInitString = 10144, EDialBearerService = 10145, EDialBearerProtocol = 10146, EDialRLPVersion = 10147, EDialIWFtoMS = 10148, EDialMStoIWF = 10149, EDialAckTimer = 10150, EDialRetransmissionAttempts = 10151, EDialResequencePeriod = 10152, EDialV42Compression = 10153, EDialV42CodeWords = 10154, EDialV42MaxLength = 10155, EDialUseEdge = 10156, EPluginDialAttribRangeMax = 19999 }
	These are the common attribute of every dial in/out bearer types. More...
enum	TConnectionMethodHscsdSpecificAttributes { EPluginHSCSDAttribStart = 20000, EHscsdChannelCoding = 20100, EHscsdAiur = 20101, EHscsdRequestedTimeSlots = 20102, EHscsdMaximumTimeSlots = 20103, EHscsdAsymmetry = 20104, EHscsdUserInitUpgrade = 20105, EPluginHSCSDAttribRangeMax = 29999 }
	Enumeration for the HSCSD specific attributes. More...
enum	TConnectionMethodPacketDataSpecificAttributes { EPacketDataSpecificAttributes = 10000, EPacketDataOutGoing, EPacketDataAPName = 10100, EPacketDataPDPType, EPacketDataPDPAddress, EPacketDataReqPrecedence, EPacketDataReqDelay, EPacketDataReliability, EPacketDataPeakThroughput, EPacketDataMeanThroughput, EPacketDataMinPrecedence, EPacketDataMinDelay, EPacketDataMinReliability, EPacketDataMinPeakThroughput, EPacketDataMinMeanThroughput, EPacketDataDataCompression, EPacketDataHeaderCompression, EPacketDataUseEdge, EPacketDataAnonymousAccess, EPacketDataIFParams, EPacketDataIFNetworks, EPacketDataIFPromptForAuth, EPacketDataIFAuthName, EPacketDataIFAuthPass, EPacketDataIFAuthRetries, EPacketDataIPNetmask, EPacketDataIPGateway, EPacketDataIPAddrFromServer, EPacketDataIPAddr, EPacketDataIPDNSAddrFromServer, EPacketDataIPNameServer1, EPacketDataIPNameServer2, EPacketDataIPIP6DNSAddrFromServer, EPacketDataIPIP6NameServer1, EPacketDataIPIP6NameServer2, EPacketDataIPAddrLeaseValidFrom, EPacketDataIPAddrLeaseValidTo, EPacketDataConfigDaemonManagerName, EPacketDataConfigDaemonName, EPacketDataEnableLcpExtension, EPacketDataDisablePlainTextAuth, EPacketDataApType, EPacketDataQoSWarningTimeOut, EPacketDataServiceEnableLLMNR, EPacketDataRangeMax = 19999 }
	Packet Data specific connection method attributes. More...
enum	TPacketDataApType { EPacketDataInternetOnly, EPacketDataWAPOnly, EPacketDataBoth }
	Enumeration for packet data AP types. More...
enum	TConnectionMethodVpnSpecificAttributes { EPluginVpnAttribStart = 30000, EVpnServicePolicyName = 30100, EVpnServicePolicy, EVpnIapId, EVpnNetworkId, EVpnServiceEnableLLMNR, EPluginVpnAttribRangeMax = 39999 }
	VPN specific attributes. More...
enum	TWlanNetMode { EAdhoc = 0, EInfra = 1 }
	enumerations for WLAN network modes More...
enum	TWlanSecMode { EWlanSecModeOpen = 1, EWlanSecModeWep = 2, EWlanSecMode802_1x = 4, EWlanSecModeWpa = 8, EWlanSecModeWpa2 = 16 }
	enumerations for WLAN security modes More...
enum	TConnectionMethodWlanSpecificAttributes { EWlanIfNetworks = KLanBaseIfNetworks, EWlanIpNetMask, EWlanIpGateway, EWlanIpAddrFromServer, EWlanIpAddr, EWlanIpDNSAddrFromServer, EWlanIpNameServer1, EWlanIpNameServer2, EWlanIp6DNSAddrFromServer, EWlanIp6NameServer1, EWlanIp6NameServer2, EWlanIpAddrLeaseValidFrom, EWlanIpAddrLeaseValidTo, EWlanConfigDaemonManagerName, EWlanConfigDaemonName, EWlanServiceExtensionTableName, EWlanServiceExtensionTableRecordId, EWlanSpecificAttributes = 30000, EWlanServiceId = 30100, EWlanConnectionMode, EWlanSSID, EWlanUsedSSID, EWlanSecurityMode, EWlanAuthenticationMode, EWlanScanSSID, EWlanChannelID, EWlanAllowSSIDRoaming, EWlanRangeInternal = 35000, EWlanSecuritySettings, EWlanRangeMax = 39999 }
	Wlan specific connection method attributes. More...
Functions
	_LIT (KUnspecifiedIPv4,"0.0.0.0")
	Unspecified IPv4 address.
	_LIT (KKnownIp6NameServer1,"fec0:000:0000:ffff::1")
	Known IPv6 name server 1.
	_LIT (KKnownIp6NameServer2,"fec0:000:0000:ffff::2")
	Known IPv6 name server 2.
	_LIT (KDynamicIpv6Address,"0:0:0:0:0:0:0:0")
	Dynamic IPv6 address.
	_LIT (KDefProxyProtocolName,"http")
	Default proxy protocol name.
	_LIT (KDefaultProxyPortNumber,"0")
	Default proxy port number.
	_LIT (KDefIspIfNetworksIPv4,"ip")
	IPv4 network protocol.
	_LIT (KDefIspIfNetworksIPv6,"ip6")
	IPv6 network protocol.
	_LIT (KDefIspIfNetworksIPv4IPv6,"ip,ip6")
	IPv4 and IPv6 network protocols.
	_LIT (KDefIspIfNetworksIPv4IPv6LAN,"ip")
	IPv4 and IPv6 network protocols for LAN bearers.
	_LIT (KDaemonManagerName,"NetCfgExtnDhcp")
	_LIT (KConfigDaemonName,"!DhcpServ")
Variables
const TInt	KErrConnectionNotFound = -32700
	CCmApplicationSettingsUi::RunApplicationSettingsL leaves with this error code if the selection dialog would have zero elements caused by filtering out all the Connection Methods with the aFilterArray and not requesting other list elements by the aListItems bitfield.
const TInt	KDataMobilitySelectionPolicyPriorityWildCard = 256
const TUint32	KCallBackTimeOut = 60000000
	callback timeout in microseconds
const TInt	KEndOfArray = -1
	indicated the end of the array in the following max speed array sets
const TInt	KCsdAnalogue []
	the set of max speeds available for CSD analogue
const TInt	KCsdAnalogueWcdma []
	the set of speeds available for CSD wcdma analogue
const TInt	KCsdIsdn110 []
	the set of speeds available for CSD idsn 110
const TInt	KCsdIsdn110Wcdma []
	the set of speeds available for CSD isdn 110 wcdma
const TInt	KCsdIsdn120 []
	the set of speeds available for CSD isdn 120
const TInt	KCsdIsdn120Wcdma []
	the set of speeds available for CSD isdn 120 wcdma
const TInt	KHcsdAnal []
	the set of speeds available for HSCSD analogue
const TInt	KHcsdIsdn110 []
	the set of speeds available for HSCSD isdn 110
const TInt	KHcsdIsdn120 []
	the set of speeds available for HSCSD isdn 120

Enumeration Type Documentation

enum CMManager::TCmCallSpeed

These enums are used to represent the connection speed.

Enumerator:

ECmSpeedAutobaud	Autodetect.
ECmSpeed9600	9600
ECmSpeed14400	14400
ECmSpeed19200	19200
ECmSpeed28800	28800
ECmSpeed38400	38400
ECmSpeed43200	43200
ECmSpeed56000	56000

enum CMManager::TCmCallType

These enums are used to represent the conn.

type Analogue/ISDNv110/ISDNv120

Enumerator:

ECmCallTypeAnalogue	Analogue.
ECmCallTypeISDNv110	ISDN v. 110.
ECmCallTypeISDNv120	ISDN v. 120.

enum CMManager::TCmSelectionDialogItems

These bitmasks controls what items does the selection UI containes.

Bitmasks not listed in the enum are reserved for future usage and they are disabled by default. So extending these bitmasks does not cause BC break later.

Enumerator:

EShowAlwaysAsk	AlwaysAsk is added to the selection UI.
EShowDefaultConnection	DefaultConnection is added to the selection UI.
EShowDestinations	The following enumerations controls how destinations and Connection Methods are presented in the selection UI. Destination list is added to the selection UI. EShowDestinations is set and EShowConnectionMethods is set: Destination list is added to the selection UI and a Connection Method can be selected inside a Destination. EShowDestinations is set and EShowConnectionMethods is not set: Destination list is added to the selection UI and no Connection Method can be selected inside a Destination. EShowDestinations is not set and EShowConnectionMethods is set: Connection Method list is added to the selection UI. Connection Methods are ordered according to the global bearer type priorities. Destination cannot be selected. EShowDestinations is not set and EShowConnectionMethods is not set: The selection UI will not contain any Destination or Connection Method. E.g. If EShowAlwaysAsk and EShowDefaultConnection was set then the selection UI will contain two entries (AlwaysAsk and DefaultConnection). Destinations which does not contain any Connection Methods are not shown.
EShowConnectionMethods	If EShowDestinations is set: Connection Method can be selected inside a destination. If EShowDestinations is not set: Connection Method list is added to the selection UI.

enum CMManager::TCmSettingSelectionMode

The selection type of a list item in application settings UI.

Enumerator:

EAlwaysAsk	The user selected Always ask.
EDestination	The user selected a destination.
EConnectionMethod	The user selected a connection method.
EDefaultConnection

enum CMManager::TConnectionMethodCommonAttributes

This enum lists all the common attributes of Connection Methods.

Enumerator:

ECmCoverage	The following attributes can be queried via both the manager interface's and connection method interface's Get functions. Checks if there's coverage for this bearer. (TBool - default: none - read only)
ECmDefaultPriority	Default global priority of the CM's bearer type. (TUint32 - default: none - read only)
ECmDestination	ETrue if this connection method is an embedded destination. (TBool - default: none - read only)
ECmBearerHasUi	Indicates whether the bearer has any UI. (TBool - default: none - read only)
ECmIPv6Supported	Returns ETrue if IPv6 is supported. (TBool - default: none - read only)
ECmDefaultUiPriority	Priority of this bearer type when shown in UI for configuring a new IAP. (TUint32 - default: none - read only)
ECmBearerIcon	Return the bearer specific icon. Assumes that there's an existing EEikEnv in the client. Type cast return value from TUint32 to CGuiIcon*. Return value 0 means bearer has no icon. (TUint32 - default: none - read only)
ECmBearerAvailableIcon	Return the bearer available specific icon. Assumes that there's an existing EEikEnv in the client. Type cast return value from TUint32 to CGuiIcon*. Return value 0 means bearer has no icon. (TUint32 - default: none - read only)
ECmBearerAvailableName	Name of the bearer. Can be used in layout list_double_large_graphic_popup_menu_pane. (String - default: none - read only)
ECmBearerSupportedName	Name of the bearer. Can be used in layout list_single_popup_menu_pane_1. (String - default: none - read only)
ECmBearerAvailableText	Localized text 'Available'. Can be used in layout list_double_large_graphic_popup_menu_pane. (String - default: none - read only)
ECmBearerNamePopupNote	Localized text of the bearer type name. Can be used in layout popup note. (String - default: none - read only)
ECmCommsDBBearerType	For backward compatibility, connection method can return its CommsDB specific bearer type. (TUint32 - default: none - read only) Leaves with KErrUnknown if no associated bearer type exists in CommsDat.
ECmBearerSettingName	Name of the data bearer used when accessing external network. (String - default: none - read only)
ECmVirtual	Is the given connection method virtual? (TBool - default: none - read only).
ECmInvalidAttribute	These are not bearer specific, but controling attributes. Client application can check which attribute was incorrect in UpdateL(). (TUint32 - default: none - read only)
ECmAddToAvailableList	Bearer type has to be added to the avaialable bearer type list. (TBool - default: EFalse - read only)
ECmLoadResult	Result of the load process. KErrNone if there was no error. Otherwise a system wide error code. (TUint32 - default: KErrNone - read only)
ECmBearerType	Attributes the can be queried only via connection method's GetXXXAttributeL() connection manager's function GetConnectionMethodInfoXXXL() functions Bearer type of the CM (TUint - default: none - read only).
ECmName	Name of the CM (String - default: none).
ECmIapId	IAP id (TUint32 - default: none - read only).
ECmStartPage	Start page of the connection method (String - default: empty string).
ECmHidden	Connection method is hidden. (not supported yet) (TBool - default: EFalse)
ECmProtected	This connection method is protected. Modifying it needs NetworkControl capability. (TBool - default: EFalse)
ECmNamingMethod	See acceptable values in TNamingControl. (TUint32 - default: ENamingUnique)
ECmSeamlessnessLevel	Defines whether an IAP can be roamed to. See details in TSeamlessnessValue. (TUint32 - default: ESeamlessnessConfirmFirst )
ECmElementID	Element id of the connection method in IAP table. (TUint32 - default: none - read only)
ECmNetworkId	Network id of the connection method. (TUint32 - default: none - read only)
ECmConnected	Is network connection created with connection method? (TBool - default: none - read only).
ECmId	ID to uniquely identify the connection methods It is guaranteed that every connection method has an ECmId (TUint32 - default: none - read only).
ECmWapId
ECmIapServiceId	Provided for backwards compatibility only. The record ID of the connection methods' corresponding WAP_ACCESS_POINT record, which use had been deprecated as the main ID should now be ECmIapId, ECmElementID or ECmId. (TUint32 - default: none - read only)
ECmMetaHighlight	The following attributes are stored in the connection method's meta data record. Set to indicate that this connection method is highlighted in Agent dialog. Only one connection method can have this flag set. (TBool - default: EFalse)
ECmMetaHiddenAgent	Set to hide this connection method in Agent dialog. (TBool - default: EFalse)
ECmNextLayerIapId	Returns the linked connection method's IAP id. (TUint32 - default: None)
ECmNextLayerSNAPId	Returns the linked connection method's SNAP id. (TUint32 - default: None)
ECmProxyUsageEnabled	Set to enable/disable proxy setting of connection method. Disabling: record is deleted from proxy when UpdateL() is called. Proxy record is deleted on UpdateL() if ECmProxyServerName is an empty string. It can be queried only via the connection method's GetXXXAttributeL() (TBool: default: EFalse)
ECmProxyServerName	Name of the host. It can be queried only via the connection method's GetXXXAttributeL() (String - default: none)
ECmProxyProtocolName	Name of the protocol for which this proxy can be used. It can be queried only via the connection method's GetXXXAttributeL() (String - default: none)
ECmProxyPortNumber	Port number It can be queried only via the connection method's GetXXXAttributeL() (TUint32 - default: none).
ECmProxyExceptions	";" separated list of the addresses for which the proxy server should not be used. It can be queried only via the connection method's GetXXXAttributeL() (String - default: none)
ECmProxyRangeMax	Marks the end of the proxy range.
ECmChargeCardUsageEnabled	Same as in ECmProxyUsageEnabled but for charge card. (TBool - default: EFalse)
ECmChargeCardAccountNumber	Account number (String - default: none).
ECmChargeCardPIN	PIN number (String - default: none).
ECmChargeCardLocalRule	Order of dialling account number, PIN and phone number for local calls. (String - default: none)
ECmChargeCardNatRule	Order of dialling account number, PIN and phone number for national calls. (String - default: none)
ECmChargeCardIntlRule	Order of dialling account number, PIN and phone number for international calls. (String - default: none)
ECmChargeCardRangeMax	Marks the end of the chargecard range.
ECmLocationUsageEnabled	Same as in ECmProxyUsageEnabled but for location. (TBool - default: EFalse)
ECmLocationIntlPrefixCode	International prefix code. (String - default: none)
ECmLocationNatPrefixCode	National prefix code. (String - default: none)
ECmLocationNatCode	National code (String - default: none).
ECmLocationAreaCode	Area code. (String - default: none)
ECmLocationDialOutCode	Number to dial for an outside line. (String - default: none)
ECmLocationDisableCallWaitingCode	Code to dial to disable call waiting facility. (String - default: none)
ECmLocationMobile	Mobile phone? (TBool - default: none).
ECmLocationUsePulseDial	Use pulse dialling? (TBool - default: none).
ECmLocationWaitForDialTone	Wait for the dial tone? (TBool - default: none).
ECmLocationPauseAfterDialOut	Pause time after dial out. (TUint32 - default: none)
ECmLocationRangeMax	Marks the end of the location range.
ECmWapIPGatewayAddress	WAP Gateway address, in this case an IP address. (String - default: none)
ECmWapIPWSPOption	Enum value indicating whether connection-oriented or connectionless API should be used. See valid values in TWapWSPOption. (TUint32 - default: ECmWapWspOptionConnectionless)
ECmWapIPSecurity	Attempt secure WTLS connection to the gateway (TBool - default: EFalse).
ECmWapIPProxyPort	Proxy port number. Required for WAP2.0 only. (TUint32 - default: none)
ECmWapIPProxyLoginName	Proxy login name. Required for WAP2.0 only. (String - default: none)
ECmWapIPProxyLoginPass	Proxy login password. Required for WAP2.0 only. (String - default: none)
ECmWapRangeMax	Marks the end of the WAP specific range.
ECmCommonAttributesStart	The following attributes are common for many bearer types. Marks the beginning of the common attributes. It's not sure that every IF or IP attribute is supported by all bearer types. It's not possible to query these attributes via GetConnectionInfoXXX() functions.
ECmIFName	Interface name It can be queried only via the connection method's GetXXXAttributeL() (String - default: none).
ECmIFParams	Interface parameter string It can be queried only via the connection method's GetXXXAttributeL() (String - default: none).
ECmIFNetworks	List of network protocols It can be queried only via the connection method's GetXXXAttributeL() (String - default: none).
ECmIFPromptForAuth	Prompt user for authentication It can be queried only via the connection method's GetXXXAttributeL() (TBool - default: none).
ECmIFAuthName	Authentication user name used by PPP It can be queried only via the connection method's GetXXXAttributeL() (String - default: none).
ECmIFAuthPass	Authentication password used by PPP It can be queried only via the connection method's GetXXXAttributeL() (String - default: none).
ECmIFAuthRetries	Number of times for retrying authentication if it fails It can be queried only via the connection method's GetXXXAttributeL() (TUint32 - default: none).
ECmIPNetmask	IP net mask of interface It can be queried only via the connection method's GetXXXAttributeL() (String - default: none).
ECmIPGateway	IP address of gateway It can be queried only via the connection method's GetXXXAttributeL() (String - default: none).
ECmIPAddFromServer	Get IP address from server? It can be queried only via the connection method's GetXXXAttributeL() (TBool - default: none).
ECmIPAddress	IP address of interface It can be queried only via the connection method's GetXXXAttributeL() (String - default: none).
ECmIPDNSAddrFromServer	Get DNS addresses from server? It can be queried only via the connection method's GetXXXAttributeL() (TBool - default: none).
ECmIPNameServer1	IP address of primary name server It can be queried only via the connection method's GetXXXAttributeL() (String - default: none).
ECmIPNameServer2	IP address of secondary name server It can be queried only via the connection method's GetXXXAttributeL() (String - default: none).
ECmIP6DNSAddrFromServer	Get IP6 DNS addresses from server? It can be queried only via the connection method's GetXXXAttributeL() (TBool - default: none).
ECmIP6NameServer1	IP6 address of primary name server It can be queried only via the connection method's GetXXXAttributeL() (String - default: none).
ECmIP6NameServer2	IP6 address of secondary name server It can be queried only via the connection method's GetXXXAttributeL() (String - default: none).
ECmIPAddrLeaseValidFrom	IP address valid from this time, used to store dynamically assigned address lease info It can be queried only via the connection method's GetXXXAttributeL() (String - default: none).
ECmIPAddrLeaseValidTo	IP address valid for use until this time, used to store dynamically assigned address lease info It can be queried only via the connection method's GetXXXAttributeL() (String - default: none).
ECmConfigDaemonManagerName	Name of the ECom configuration daemon manager component. This component interfaces with the server identified in ECmConfigDaemonName. If specified, ECmConfigDaemonName should also be specified. It can be queried only via the connection method's GetXXXAttributeL() (String - default: none)
ECmConfigDaemonName	Name of the configuration daemon server. This server is used to provide further configuration for a connection, e.g. dynamic IP address assignment. If specified, ECmConfigDaemonManagerName should also be specified. It can be queried only via the connection method's GetXXXAttributeL() (String - default: none)
ECmEnableLPCExtension	Enable LCP extensions? It can be queried only via the connection method's GetXXXAttributeL() (TBool - default: none).
ECmDisablePlainTextAuth	Disable plaintext authentication? It can be queried only via the connection method's GetXXXAttributeL() (TBool - default: none).
ECmCommonAttributesEnd	Marks the end of common attributes.
ECmSpecialAttributes	The following methods can be queried only via connection method's GetXXXAttributeL() Marks the beginning of special attributes.
ECmIsLinked	Is connection method linked to any virtual connection method? It can be queried only via the connection method's GetXXXAttributeL() (TBool - default: none).
ECmSpecialAttributesEnd	Marks the end of special attributes.

enum CMManager::TConnectionMethodCsdHscsdCommonAttributes

These are the common attribute of every dial in/out bearer types.

Enumerator:

EPluginDialAttribStart	Marks the beginning of common dial in/out attributes.
EDialOut	Dial out or in. ETrue means dial out. (TBool - default: ETrue)
EDialCallType	Call type. See acceptable values in TCmCallType. (TUint32 - default: ECmCallTypeAnalogue )
EDialMaxConnSpeed	Maximum speed. See acceptable values in TCmCallSpeed. (TUint32 - default: ECmSpeedAutobaud )
EDialDescription	Application's description of ISP. (String - default: none)
EDialType	Enum value indicating ISP type, e.g. Internet ISP, WAP ISP. Selected from TCommsDbIspType (TUint32 - default: EIspTypeInternetAndWap)
EDialDefaultTelNum	Default phone number. (Only for dial out) (String - default: none)
EDialDialResolution	Perform dialling resolution for default phone number? (Only for dial out) (TBool - default: none).
EDialChargeCard	Identifier of the chargecard in this ISP. (Only for dial out) (TUint32 - default: none)
EDialUseLoginScript	Use login script? (TBool - default: EFalse).
EDialLoginScript	Login script (used if Use Login Script is ETrue) (String - default: none).
EDialAuthentication	UNUSED (will eventually point to some authentication table/group) (Only for dial in) (TUint32 - default: none).
EDialPromptForLogin	Prompt user for username and password? (Only for dial out) (TBool - default: EFalse).
EDialLoginName	Login name. (Only for dial out) (String - default: none)
EDialLoginPassword	Login password. (Only for dial out) (String - default: none)
EDialDisplayPCT	Display PCT (without scanning script for READ command)? (Only for dial out) (TBool - default: none).
EDialIFParams	Interface parameter string. (String - default: none)
EDialIFNetworks	Comma separated list of network protocols, e.g. "PPP" (String - default: none)
EDialIFPromptForAuth	Prompt user for authentication username and password? (Only for dial out) (TBool - default: EFalse).
EDialIFAuthName	Authentication username used by PPP (Only for dial out) (String - default: none).
EDialIFAuthPass	Authentication password used by PPP (Only for dial out) (String - default: none).
EDialIFAuthRetries	Number of times to retry authentication if it fails. (TUint32 - default: none)
EDialIFCallbackEnabled	Callback enabled? (Only for dial out) (TBool - default: none).
EDialIFCallbackType	Enum value indicating type of callback (if enabled). Selected from TCallbackAction. (Only for dial out) (TUint32 - default: none)
EDialIFCallbackInfo	Info for callback request (if enabled) This is an 8-bit string! (Only for dial out) (String - default: none).
EDialCallbackTimeout	Time to wait for callback in microseconds (if enabled) (Only for dial out) (TUint32 - default: none).
EDialIFServerMode	When PPP is configured as a server. (Only for dial out) (TBool - default: none)
EDialIPAddressFromServer	Get IP address from server? (TBool - default: none).
EDialIPAddress	IP address of interface (String - default: none).
EDialIPNetmask	IP net mask of interface (String - default: none).
EDialIPGateway	IP address of gateway. (String - default: none)
EDialIPDNSAddressFromServer	Get DNS addresses from server? (TBool - default: none).
EDialIPNameServer1	IP Address of primary name server. (String - default: none)
EDialIPNameServer2	IP Address of secondary name server. (String - default: none)
EDialIP6DNSAddressFromServer	Get IP6 DNS addresses from server? (TBool - default: none).
EDialIP6NameServer1	IP6 Address of primary name server (String - default: none).
EDialIP6NameServer2	IP6 Address of secondary name server (String - default: none).
EDialIPAddressLeaseValidFrom	IP address valid from this time, used to store dynamically assigned address lease info. (Only for dial out) (String - default: none)
EDialIPAddressLeaseValidTo	IP address valid for use until this time, used to store dynamically assigned address lease info. (Only for dial out) (String - default: none)
EDialConfigDaemonManagerName	Name of the ECOM configuration daemon manager component. This component interfaces with the server identified in ISP_CONFIG_DAEMON_NAME. If specified, ISP_CONFIG_DAEMON_NAME should also be specified. (Only for dial out) (String - default: none)
EDialConfigDaemonName	Name of the configuration daemon server. This server is used to provide further configuration for a connection, e.g. dynamic IP address assignment. If specified, ISP_CONFIG_DAEMON_MANAGER_NAME should also be specified. (Only for dial out) (String - default: none)
EDialEnableIPHeaderComp	Enable IP header compression? (TBool - default: none).
EDialEnableLCPExtension	Enable LCP extension? (TBool - default: none).
EDialDisablePlainTextAuth	Disable plain text authentication? (TBool - default: none).
EDialEnableSWComp	Enable software compression (e.g. Microsoft, STAC or Predictor compression)? (TBool - default: none)
EDialBearerName	Enum value specifying the name of the bearer, e.g. Asynchronous Modem. Selected from RBasicGsmCall::TBearerName (TUint32 - default: none)
EDialBearerSpeed	Enum value specifying the bearer speed from RBasicGsmCall::TBearerSpeed (TUint32 - default: none).
EDialBearerCE	Enum value specifying the bearer CE, e.g. non-transparent. Selected from RbasicGsmCall::TBearerCE (TUint32 - default: none)
EDialInitString	Modem initialisation string to be used when this ISP is in use. This string is copied into the MODEM_ISP_INIT_STRING field by NetDial. 8bit string! (String- default: none)
EDialBearerService	Enum of type RMobileCall::TMobileCallDataService. (Only for dial out) (TUint32 - default: none)
EDialBearerProtocol	Enum of type RMobileCall::TMobileCallDataProtocol. (Only for dial out) (TUint32 - default: none)
EDialRLPVersion	Enum of type RMobileCall::TMobileCallDataRLPVersion. (Only for dial out) (TUint32 - default: none)
EDialIWFtoMS	Integer specifying network to MS window size. (Only for dial out) (TUint32 - default: none)
EDialMStoIWF	Integer specifying MS to network window size. (Only for dial out) (TUint32 - default: none)
EDialAckTimer	Integer specifying rlp ack timeout in microseconds. (Only for dial out) (TUint32 - default: none)
EDialRetransmissionAttempts	Integer specifying rlp retransmission attempts. (Only for dial out) (TUint32 - default: none)
EDialResequencePeriod	Integer specifying resequencing period. (Only for dial out) (TUint32 - default: none)
EDialV42Compression	Enum of type TMobileCallDataV42bis. (Only for dial out) (TUint32 - default: none)
EDialV42CodeWords	Integer specifying V42bis codewords. (Only for dial out) (TUint32 - default: none)
EDialV42MaxLength	Integer specifying V42bis maximum string length. (Only for dial out) (TUint32 - default: none)
EDialUseEdge	EDGE parameter used by GSM. (TBool - default: none)
EPluginDialAttribRangeMax	Marks the end of common dial in/out attributes.

enum CMManager::TConnectionMethodHscsdSpecificAttributes

Enumeration for the HSCSD specific attributes.

Enumerator:

EPluginHSCSDAttribStart	Marks the beginning of HSCSD attributes.
EHscsdChannelCoding	Enum value specifying HSCSD channel coding. Selected from RMobileCall::TMobileCallTchCoding. (TUint32 - default: none - read only)
EHscsdAiur	Enum value specifying AIUR for HSCSD. Selected from RMobileCall::TMobileCallAiur. (TUint32 - default: none - read only)
EHscsdRequestedTimeSlots	Requested number of time slots for HSCSD. (TUint32 - default: none - read only)
EHscsdMaximumTimeSlots	Maximum number of time slots for HSCSD which could be requested during this connection. (TUint32 - default: none - read only)
EHscsdAsymmetry	Enum of type TMobileCallAsymmetry for HSCSD. (TUint32 - default: none)
EHscsdUserInitUpgrade	HSCSD parameter - user init upgrade. (TBool - default: none)
EPluginHSCSDAttribRangeMax	Marks the end of HSCSD attributes.

enum CMManager::TConnectionMethodPacketDataSpecificAttributes

Packet Data specific connection method attributes.

Enumerator:

EPacketDataSpecificAttributes	Marks the beginning of packet data specific attributes.
EPacketDataOutGoing	Indicates the direction of this connection method. Value ETrue means outgoing, EFalse is incoming. Can be changed dynamically, but every packet data specific data is lost then. (TBool - default: ETrue)
EPacketDataAPName	Access point name. (String - default: None)
EPacketDataPDPType	PDP type. Values can be one (RPacketContext::TProtocolType): EPdpTypeIPv4 or EPdpTypeIPv6 (TUint32 - default: EPdpTypeIPv4 if IPv4 only EPdpTypeIPv6 if IPv6 supported )
EPacketDataPDPAddress	PDP address of phone. ( String - default: None)
EPacketDataReqPrecedence	Requested quality of service precedence class. ( TUint32 - default: None)
EPacketDataReqDelay	Requested quality of service delay class. ( TUint32 - default: None)
EPacketDataReliability	Requested quality of service reliability class. ( TUint32 - default: None)
EPacketDataPeakThroughput	Requested quality of service peak throughput class. ( TUint32 - default: None)
EPacketDataMeanThroughput	Requested quality of service mean throughput class. ( TUint32 - default: None)
EPacketDataMinPrecedence	Minimum quality of service precedence class. ( TUint32 - default: None)
EPacketDataMinDelay	Minimum quality of service delay class. ( TUint32 - default: None)
EPacketDataMinReliability	Minimum quality of service reliability class. ( TUint32 - default: None)
EPacketDataMinPeakThroughput	Minimum quality of service peak throughput class. ( TUint32 - default: None)
EPacketDataMinMeanThroughput	Minimum quality of service mean throughput class. ( TUint32 - default: None)
EPacketDataDataCompression	Data compression on? ( TBool - default: None).
EPacketDataHeaderCompression	IP header compression on? ( TBool - default: None).
EPacketDataUseEdge	EDGE parameter. ( TBool - default: None)
EPacketDataAnonymousAccess	Use anonymous access on? ( TBool - default: None).
EPacketDataIFParams	Interface parameter string. ( String - default: None)
EPacketDataIFNetworks	Comma separated list of network protocols, e.g. "PPP". ( String - default: None)
EPacketDataIFPromptForAuth	Prompt user for authentication username and password? ( TBool - default: None).
EPacketDataIFAuthName	Authentication username used by PPP. ( String - default: None)
EPacketDataIFAuthPass	Authentication password used by PPP. ( String - default: None)
EPacketDataIFAuthRetries	Number of times to retry authentication if it fails. ( TUint32 - default: None)
EPacketDataIPNetmask	IP net mask of interface. ( String - default: None)
EPacketDataIPGateway	IP address of gateway ( String - default: None).
EPacketDataIPAddrFromServer	Get IP addresses (for EPOC) from server? ( TBool - default: None).
EPacketDataIPAddr	IP address of EPOC. ( String - default: None)
EPacketDataIPDNSAddrFromServer	Get DNS addresses from server? ( TBool - default: None).
EPacketDataIPNameServer1	IP Address of primary name server. ( String - default: None)
EPacketDataIPNameServer2	IP Address of secondary name server. ( String - default: None)
EPacketDataIPIP6DNSAddrFromServer	Get IP6 DNS addresses from server? ( TBool - default: None).
EPacketDataIPIP6NameServer1	IP6 Address of primary name server. ( String - default: None)
EPacketDataIPIP6NameServer2	IP6 Address of secondary name server. ( String - default: None)
EPacketDataIPAddrLeaseValidFrom	IP address valid from this time, used to store dynamically assigned address lease info. ( String - default: None)
EPacketDataIPAddrLeaseValidTo	IP address valid for use until this time, used to store. ( String - default: None)
EPacketDataConfigDaemonManagerName	IP address valid for use until this time, used to store dynamically assigned address lease info. ( String - default: None)
EPacketDataConfigDaemonName	Name of the ECOM configuration daemon manager component. This component interfaces with the server identified in ISP_CONFIG_DAEMON_NAME. If specified, ISP_CONFIG_DAEMON_NAME should also be specified. Name of the configuration daemon server. This server is used to provide further configuration for a connection, e.g. dynamic IP address assignment. If specified, ISP_CONFIG_DAEMON_MANAGER_NAME should also be specified. ( String - default: None)
EPacketDataEnableLcpExtension	Enable LCP extensions? ( TBool - default: None).
EPacketDataDisablePlainTextAuth	Disable plain text authentication? ( TBool - default: None).
EPacketDataApType	Service supports Internet only, WAP only or both. Values can be any of TPacketDataType. ( TUint32 - default: None)
EPacketDataQoSWarningTimeOut	If the requested QOS can not be satisfied warn the user after this time in microseconds. Set to 0xffffffff to disable. ( TUint32 - default: None)
EPacketDataServiceEnableLLMNR	Enable LLMNR? ( TBool - default: None).
EPacketDataRangeMax	Marks the end of packet data specific attributes.

enum CMManager::TConnectionMethodVpnSpecificAttributes

VPN specific attributes.

Note: ECmProxyPortNumber is a common bearer attribute, but its default value varies in the VPN plug-in, where it is 80

Note2: VPN, as it is a virtual plugin, does not supports the following common attributes (these are valid only for real bearers): ECmIFName, ECmIFParams, ECmIFNetworks, ECmIFPromptForAuth, ECmIFAuthName, ECmIFAuthPass, ECmIFAuthRetries, ECmIPNetmask, ECmIPGateway, ECmIPAddFromServer, ECmIPAddress, ECmIPDNSAddrFromServer, ECmIPNameServer1, ECmIPNameServer2, ECmIP6DNSAddrFromServer, ECmIP6NameServer1, ECmIP6NameServer2, ECmIPAddrLeaseValidFrom, ECmIPAddrLeaseValidTo, ECmConfigDaemonManagerName, ECmConfigDaemonName, ECmEnableLPCExtension, ECmDisablePlainTextAuth Querying these will leave with KErrNotSupported.

Enumerator:

EPluginVpnAttribStart	Marks the beginning of the VPN attributes.
EVpnServicePolicyName	Policy name. (String - default: None)
EVpnServicePolicy	Policy. (String - default: None)
EVpnIapId	Home IAP Id. (TUint32 - default: None)
EVpnNetworkId	Network Id. (TUint32 - default: None - read only)
EVpnServiceEnableLLMNR	LLMNR (TBool - default: EFalse).
EPluginVpnAttribRangeMax	Marks the end of the VPN attributes.

enum CMManager::TConnectionMethodWlanSpecificAttributes

Wlan specific connection method attributes.

Enumerator:

EWlanIfNetworks	Comma separated list of network protocols, e.g. "PPP". ( String - default: None)
EWlanIpNetMask	IP net mask of interface. ( String - default: None)
EWlanIpGateway	IP address of gateway ( String - default: None).
EWlanIpAddrFromServer	Get IP addresses (for EPOC) from server? ( TBool - default: None).
EWlanIpAddr	IP address of EPOC. ( String - default: None)
EWlanIpDNSAddrFromServer	Get DNS addresses from server? ( TBool - default: None).
EWlanIpNameServer1	IP Address of primary name server. ( String - default: None)
EWlanIpNameServer2	IP Address of secondary name server. ( String - default: None)
EWlanIp6DNSAddrFromServer	Get IP6 DNS addresses from server? ( TBool - default: None).
EWlanIp6NameServer1	IP6 Address of primary name server. ( String - default: None)
EWlanIp6NameServer2	IP6 Address of secondary name server. ( String - default: None)
EWlanIpAddrLeaseValidFrom	IP address valid from this time, used to store dynamically assigned address lease info. ( String - default: None)
EWlanIpAddrLeaseValidTo	IP address valid for use until this time, used to store dynamically assigned address lease info. ( String - default: None)
EWlanConfigDaemonManagerName	Name of the ECOM configuration daemon manager component. This component interfaces with the server identified in ISP_CONFIG_DAEMON_NAME. If specified, ISP_CONFIG_DAEMON_NAME should also be specified. ( String - default: None)
EWlanConfigDaemonName	Name of the configuration daemon server. This server is used to provide further configuration for a connection, e.g. dynamic IP address assignment. If specified, ISP_CONFIG_DAEMON_MANAGER_NAME should also be specified. ( String - default: None)
EWlanServiceExtensionTableName	Name of the WLAN Service Extension table. ( String - default: None)
EWlanServiceExtensionTableRecordId	The record ID of the linked WLAN Service Extension record in the WLAN Service Extension table. ( TUint32 - default: None)
EWlanSpecificAttributes	Marks the beginning of WLAN specific attributes.
EWlanServiceId	The record ID to which IAP record these settings belong to. ( TUint32 - default: None)
EWlanConnectionMode	The connection mode. This can be either Ad-hoc or infrastructure. TWlanNetMode enum is to be used. ( TUint32 - default: EInfra )
EWlanSSID	The SSID of this WLAN connection. ( String - default: None)
EWlanUsedSSID	Used SSID. ( String - default: None)
EWlanSecurityMode	The security mode of this WLAN connection. It is a TWlanSecMode enum. ( TUint32 - default: EWlanSecModeOpen )
EWlanAuthenticationMode	Authentication type: none, wep, wpa, wpapresharedkey ( TUint32 - default: None ).
EWlanScanSSID	Gives whether it should scan for the SSID. (TBool - default: EFalse )
EWlanChannelID	This is the channel ID in ad-hoc network mode ( TUint32 - default: EAdhocAutomatic, if set to EAdhocUserDefined default = 7 ).
EWlanAllowSSIDRoaming	Gives whether it is allowed to roam inside one SSID or not. (TBool - default: determined through variation )
EWlanRangeInternal	Internal limiter.
EWlanSecuritySettings	Internal, used for the security settings.
EWlanRangeMax	Marks the end of WLAN attributes.

enum CMManager::TIPv6Types

Enumerator:

EIPv6Unspecified	Unspecified IPv6 type.
EIPv6WellKnown	Well known IPv6 type.
EIPv6UserDefined	User defined IPv6 type.

enum CMManager::TLocalisedDestinations

This is the enum set of the TSnapMetadataField's ESnapMetadataDestinationIsLocalised.

Enumerator:

ENotLocalisedDest	Used to sign that the destination is not localised at all.
ELocalisedDestInternet	Used to sign that the destination is localised as 'Internet'.
ELocalisedDestWap	Used to sign that the destination is localised as 'Wap'.
ELocalisedDestMMS	Used to sign that the destination is localised as 'MMS'.

enum CMManager::TNamingMethod

Naming method options.

Enumerator:

ENamingNothing	Do nothing with name set via ECmName.
ENamingUnique	Make name unique when ECmName is set.
ENamingNotAccept	Do not accept duplication. It will leave with KErrArgument.

enum CMManager::TPacketDataApType

Enumeration for packet data AP types.

Enumerator:

EPacketDataInternetOnly	Internet-only connection method.
EPacketDataWAPOnly	WAP-only connection method.
EPacketDataBoth	Connection method supports both WAP and Internet.

enum CMManager::TProtectionLevel

Protection Levels.

Enumerator:

EProtLevel0	No protection.
EProtLevel1	A destination and its contents.
EProtLevel2	A destination.
EProtLevel3	Note: Level 3 - Set the ECmProtected attr on connection method.

enum CMManager::TSeamlessnessValue

Enumerator:

ESeamlessnessNotRoamedTo
ESeamlessnessConfirmFirst
ESeamlessnessShowprogress
ESeamlessnessFullySeamless

enum CMManager::TSnapMetadataField

Metadata items.

Enumerator:

ESnapMetadataInternet	If set this destination is for internet usage. There can be only one such destination. (TBool - default: EFalse) Deprecated:
ESnapMetadataHighlight	If set this destination is highlighted by default in the Agent dialog. (TBool - default: EFalse)
ESnapMetadataHiddenAgent	If set this destination is hidden in the Agent dialog. (TBool - default: EFalse)
ESnapMetadataDestinationIsLocalised	This set of flags identifies the fixed destinations which have localised names. The possible values for this flag-set are the enums of TLocalisedDestinations.
ESnapMetadataPurpose	This set of flags identifies the fixed destinations for fixed purposes. The possible values for this flag-set are the enums of TSnapPurpose.

enum CMManager::TSnapPurpose

This is the enum set of the TSnapMetadataField's ESnapMetadataPurpose.

Enumerator:

ESnapPurposeUnknown
ESnapPurposeInternet	Used to sign that the destination is identified as 'Internet'.
ESnapPurposeOperator	Used to sign that the destination is identified as 'Operator'.
ESnapPurposeMMS	Used to sign that the destination is identified as 'MMS'.
ESnapPurposeIntranet	Used to sign that the destination is identified as 'Intranet'.

enum CMManager::TWapWSPOption

WAP WSP options.

Enumerator:

ECmWapWspOptionConnectionless	Indicates that connectionless APIs should be used.
ECmWapWspOptionConnectionOriented	Indicates that connection oriented APIs should be used.

enum CMManager::TWlanNetMode

enumerations for WLAN network modes

Enumerator:

EAdhoc	Ad-Hoc mode.
EInfra	Infrastructure mode.

enum CMManager::TWlanSecMode

enumerations for WLAN security modes

Enumerator:

EWlanSecModeOpen	Open security mode.
EWlanSecModeWep	WEP security mode.
EWlanSecMode802_1x	802.1x security mode
EWlanSecModeWpa	WPA security mode.
EWlanSecModeWpa2	WPA@ security mode.

Function Documentation

CMManager::_LIT	(	KConfigDaemonName	,
		"!DhcpServ"
	)

CMManager::_LIT	(	KDaemonManagerName	,
		"NetCfgExtnDhcp"
	)

CMManager::_LIT	(	KDefIspIfNetworksIPv4IPv6LAN	,
		"ip"
	)

IPv4 and IPv6 network protocols for LAN bearers.

CMManager::_LIT	(	KDefIspIfNetworksIPv4IPv6	,
		"	ip,
		ip6"
	)

IPv4 and IPv6 network protocols.

CMManager::_LIT	(	KDefIspIfNetworksIPv6	,
		"ip6"
	)

IPv6 network protocol.

CMManager::_LIT	(	KDefIspIfNetworksIPv4	,
		"ip"
	)

IPv4 network protocol.

CMManager::_LIT	(	KDefaultProxyPortNumber	,
		"0"
	)

Default proxy port number.

CMManager::_LIT	(	KDefProxyProtocolName	,
		"http"
	)

Default proxy protocol name.

CMManager::_LIT	(	KDynamicIpv6Address	,
		"0:0:0:0:0:0:0:0"
	)

Dynamic IPv6 address.

CMManager::_LIT	(	KKnownIp6NameServer2	,
		"fec0:000:0000:ffff::2"
	)

Known IPv6 name server 2.

CMManager::_LIT	(	KKnownIp6NameServer1	,
		"fec0:000:0000:ffff::1"
	)

Known IPv6 name server 1.

CMManager::_LIT	(	KUnspecifiedIPv4	,
		"0.0.0.0"
	)

Unspecified IPv4 address.

Variable Documentation

const TUint32 CMManager::KCallBackTimeOut = 60000000

callback timeout in microseconds

const TInt CMManager::KCsdAnalogue[]

Initial value:

 { ECmSpeedAutobaud, ECmSpeed9600, 
                                        ECmSpeed14400, 
                                        KEndOfArray }

the set of max speeds available for CSD analogue

const TInt CMManager::KCsdAnalogueWcdma[]

Initial value:

 { ECmSpeedAutobaud, ECmSpeed9600, 
                                        ECmSpeed14400, ECmSpeed28800, 
                                        KEndOfArray}

the set of speeds available for CSD wcdma analogue

const TInt CMManager::KCsdIsdn110[]

Initial value:

 { ECmSpeed9600, ECmSpeed14400, 
                                        KEndOfArray}

the set of speeds available for CSD idsn 110

const TInt CMManager::KCsdIsdn110Wcdma[]

Initial value:

 { ECmSpeed9600, ECmSpeed14400, 
                                        ECmSpeed28800, ECmSpeed38400, 
                                        KEndOfArray}

the set of speeds available for CSD isdn 110 wcdma

const TInt CMManager::KCsdIsdn120[]

Initial value:

 { ECmSpeed9600, ECmSpeed14400, 
                                        KEndOfArray}

the set of speeds available for CSD isdn 120

const TInt CMManager::KCsdIsdn120Wcdma[]

Initial value:

 { ECmSpeed9600, ECmSpeed14400, 
                                        ECmSpeed28800, ECmSpeed56000,
                                        KEndOfArray}

the set of speeds available for CSD isdn 120 wcdma

const TInt CMManager::KDataMobilitySelectionPolicyPriorityWildCard = 256

const TInt CMManager::KEndOfArray = -1

indicated the end of the array in the following max speed array sets

const TInt CMManager::KErrConnectionNotFound = -32700

CCmApplicationSettingsUi::RunApplicationSettingsL leaves with this error code if the selection dialog would have zero elements caused by filtering out all the Connection Methods with the aFilterArray and not requesting other list elements by the aListItems bitfield.

See the comment of the RunApplicationSettingsL method for more detailes. This error code is supported by the error resolver.

const TInt CMManager::KHcsdAnal[]

Initial value:

 { ECmSpeedAutobaud, ECmSpeed9600, 
                                        ECmSpeed14400, ECmSpeed19200, 
                                        ECmSpeed28800, KEndOfArray }

the set of speeds available for HSCSD analogue

const TInt CMManager::KHcsdIsdn110[]

Initial value:

 { ECmSpeed9600, ECmSpeed14400, 
                                        ECmSpeed19200, ECmSpeed28800, 
                                        ECmSpeed38400, KEndOfArray}

the set of speeds available for HSCSD isdn 110

const TInt CMManager::KHcsdIsdn120[]

Initial value:

 { ECmSpeed9600, ECmSpeed14400, 
                                        ECmSpeed19200, ECmSpeed28800,
                                        ECmSpeed43200, KEndOfArray}

the set of speeds available for HSCSD isdn 120

CMManager Namespace Reference

Enumerations

Functions

Variables

Enumeration Type Documentation

Function Documentation

Variable Documentation