#include <CNTDB.H>
Link against:
cntmodel.lib
class CContactDatabase : public CBase, public MContactDbPrivObserver, public MContactStorageObserver;
Description
A database of contact items.
Contact items can be added to and removed from the database and items in the database can be opened or read. To edit an item,
it must first be opened. Changes to the item can then be committed using CommitContactL()
(committing can only take place to an open item).
If the available disk space is less than 128 kilobytes then changes to the contact database cannot be started, and methods
such as CreateL()
or CommitContactL()
will leave with a KErrDiskFull error. Less obviously OpenL()
can also fail with KErrDiskFull when trying to update the system template.
Each item has an access count. An item cannot be fully deleted unless its access count is zero. This is to prevent items which
have been synchronised with another contacts application from being deleted. Also, if the item is a template, it cannot be
deleted if other items are based on it.
More than one contact database can exist on a phone, but there is a default contact database. Its filename is contacts.cdb.
It can be moved between drives.
CContactDatabase implements searching and sorting and also provides separate phone number matching functions. These provide
a fast way of indexing and looking up phone numbers, e.g. for looking up caller IDs on incoming calls.
The database owns speed dial information. This is a mapping between a single digit integer and a telephone number. There may
be up to 9 speed dial telephone numbers; each of them belongs to a contact item in the database. If a contact item is deleted,
its speed dial mapping is removed.
The following functions defined in class CContactDatabase are not supported. If called, they leave with KErrNotSupported.
Derivation
CContactDatabase
- A database of contact items
Members
Defined in CContactDatabase
:
AddContactToGroupL()
Sets a contact item in the database to be a member of a contact group
AddContactToGroupL()
Sets a contact item in the database to be a member of a contact group
AddContactToGroupL()
Sets a contact item in the database to be a member of a contact group
AddNewContactL()
Adds a new contact item to the database and returns its ID
CancelAsyncSort()
Cancel the CCntIdleSorter object and clean up resources
CloseContactL()
Closes the contact item, allowing other applications to access it
CloseTables()
Closes all database tables
CommitContactL()
Overwrites a contact item with the values contained in aContact
CompactL()
Compacts the database to its minimum size synchronously
CompressRequired()
Tests whether a compress is recommended
ConnectionId()
Gets the ID of the connection to the Contacts server
ContactDatabaseExistsL()
A method to determine if a named contact database exists
ContactsChangedSinceL()
Gets an array of contacts modified since the specified date/time
CountL()
Gets the number of CContactItems in the database
CreateCompressorLC()
Creates an active compressor to compress the database with an active object
CreateContactCardTemplateL()
Creates a contact card template based on the system template and adds it to the database
CreateContactCardTemplateL()
Creates a contact card template and adds it to the database
CreateContactCardTemplateLC()
Creates a contact card template based on the system template and adds it to the database
CreateContactCardTemplateLC()
Creates a contact card template and adds it to the database
CreateContactGroupL()
Creates a new contact group with a default label of 'Group Label' and adds it to the database
CreateContactGroupL()
Creates a new contact group with a specified label and adds it to the database
CreateContactGroupLC()
Creates a new contact group with a default label of 'Group Label' and adds it to the database
CreateContactGroupLC()
Creates a new contact group with a specified label and adds it to the database
CreateL()
Creates and opens an empty contact database using the default database name
CreateL()
Creates and opens a named contact database
CreateOwnCardL()
Creates a default own card based on the system template and adds it to the database
CreateOwnCardLC()
Creates a default own card based on the system template and adds it to the database
CreateRecoverLC()
Creates an active recoverer object to recover the database using an active object
DatabaseDrive()
Gets the current database drive
DefaultContactDatabaseExistsL()
A static method to determine if the default contact database exists
DeleteContactL()
Deletes a contact item
DeleteContactsL()
Deletes an array of contacts
DeleteDatabaseL()
A static method to delete a named contact database
DeleteDefaultFileL()
Deletes the default contact database
EAsc
EConverterDefined1
For use by implementor of converter plug-in
EConverterDefined2
For use by implementor of converter plug-in
EConverterDefined3
For use by implementor of converter plug-in
EConverterDefined4
For use by implementor of converter plug-in
EConverterDefined5
For use by implementor of converter plug-in
EConverterDefined6
For use by implementor of converter plug-in
EConverterDefined7
For use by implementor of converter plug-in
EConverterDefined8
For use by implementor of converter plug-in
EConverterReserved1
Reserved for use by Symbian
EConverterReserved10
Reserved for use by Symbian
EConverterReserved11
Reserved for use by Symbian
EConverterReserved12
Reserved for use by Symbian
EConverterReserved13
Reserved for use by Symbian
EConverterReserved14
Reserved for use by Symbian
EConverterReserved15
Reserved for use by Symbian
EConverterReserved16
Reserved for use by Symbian
EConverterReserved2
Reserved for use by Symbian
EConverterReserved3
Reserved for use by Symbian
EConverterReserved4
Reserved for use by Symbian
EConverterReserved5
Reserved for use by Symbian
EConverterReserved6
Reserved for use by Symbian
EConverterReserved7
Reserved for use by Symbian
EConverterReserved8
Reserved for use by Symbian
EConverterReserved9
Reserved for use by Symbian
ECustomFilter1
Reserved filters for future use
ECustomFilter2
Reserved filters for future use
ECustomFilter3
Reserved filters for future use
ECustomFilter4
Reserved filters for future use
EDbConnectionClosedForRestore
The database has been closed whilst a Restore is in progress
EDbConnectionFailed
Asynchronous Open failed
EDbConnectionNeedToCloseForRestore
Restore is in progress need to close after current transaction
EDbConnectionNotReady
Initial state
EDbConnectionOpen
Database is open, connection is available for use
EDbConnectionRecoverRequired
A Rollback has occurred and a Recover is required now
EDbConnectionWriteLockedForBackup
Write access is locked during backup
EDecreaseAccessCount
Decrease the contact's access count when importing and exporting
EDefault
EDesc
EExcludeUid
Don't export the contact ID (for exporting only)
EFaxable
The filter includes items that have a fax number
EHome
The filter excludes items without a home telephone number or email address
EIMAddress
The filter includes items that have any non empty instant messaging address field
EImportSingleContact
Only import the first contact in the read stream (for importing only)
EIncludeX
Handle Symbian's extended vCard format options
EIncreaseAccessCount
Increase the contact's access count when importing and exporting
ELandLine
The filter includes items that have a landline telephone number
ELocalTime
Sets a contact item to the local time when importing
EMailable
The filter includes items that have an email address
EMultiThread
Allows for a multi-threaded program to access the contact database from multiple threads but note that the contacts model
provides no synchronisation support for such use
ENullTemplateId
Allows you to set a template to a contact item that does not exist
EPhonable
The filter includes items that are phonable
ERingTone
The filter includes items that have a non-empty ring tone field (a ring tone that is associated with the item)
ESingleThread
Allows access to the contacts database from a single thread only
ESmsable
The filter includes items that have a mobile telephone number
ETTFormat
Support non-standard extensions requried by Symbian PC connectivity software and Microsoft, amongst others
EUnfiltered
The view is unfiltered; it includes all contact items
EVoiceDial
The filter includes items that have a non-empty voice dial field (a voice recording associated with a telephone number field
in the item)
EWirelessVillage
The filter includes items that have a non empty Wireless Village ID field
EWork
The filter excludes items without a work telephone number or email address
ExportSelectedContactsL()
Converts an array of contact items to vCards and exports them to a write stream
ExportSelectedContactsL()
Converts an array of contact items to vCards and exports them to a write stream using the specified character set
FileSize()
Gets the size of the database file in bytes
FileUid()
Gets the database's UID
FilterDatabaseL()
Filters the database
FindAsyncL()
Searches the database asynchronously for a text string
FindInTextDefAsyncL()
Asynchronously searches the database for an array of words
FindInTextDefAsyncL()
Asynchronously searches the database for an array of words
FindInTextDefLC()
Enables the user to search the database for a string containing text that is stored in one or more fields
FindInTextDefLC()
Enables the user to search the database for a string containing text that is stored in one or more fields
FindLC()
Searches the database for a text string
GetCardTemplateIdListL()
Gets a copy of the database's template ID list
GetCurrentDatabase()
Where there are multiple contact databases on a device, this function can be used to enquire which database is the current
one
GetCurrentItem()
Gets the ID of the current item, as set by SetCurrentItem()
GetDbViewContactType()
Gets the type of contact items which are included in sorted views of the database, as set by SetDbViewContactType()
GetDefaultNameL()
Gets the file name of the default contact database
GetGroupIdListL()
Returns a copy of the database's group ID list
GetLastSyncDateL()
Gets the date/time the database was last synchronised with a particular sync ID, as set by SetLastSyncDateL()
GetSpeedDialFieldL()
Returns the ID of the contact item whose telephone number field is mapped to the speed dial position specified
GroupCount()
Gets the number of groups that exist in the database
HandleDatabaseEventL()
HandleDiskSpaceEvent()
Default behaviour for handling a low disk event - This function is unimplemented
ICCTemplateIdL()
Returns the ID of the template that should be used with CContactICCEntry items
ICCTemplateIdL()
Returns the ID of the template that should be used with CContactICCEntry items belonging to the phonebook with TUid aPhonebookUid
ImportContactsL()
Imports one or more vCards from a read stream
IsDamaged()
Tests whether the database is damaged and needs to be recovered
ListDatabasesL()
A static method to list the contact databases on all drives
ListDatabasesL()
A static method to list the contact databases on a specified drive
MachineId()
Returns a number unique to the contacts database
MatchPhoneNumberL()
Returns an array of contact item IDs for all the contact items which may contain the specified telephone number in a telephone,
fax or SMS type field
NullUidValue()
Gets the NULL contact ID value
Open()
Opens the default contact database asynchronously
Open()
Opens a named contact database asynchronously
OpenContactL()
Opens a contact item for editing
OpenContactL()
Opens a contact item for editing, leaving the lock record on the cleanup stack
OpenContactLX()
Opens a contact item for editing using a specified view definition
OpenContactLX()
Opens a contact item for editing, leaving the lock record on the cleanup stack
OpenL()
Opens the default contact database
OpenL()
Opens a named contact database
OpenTablesL()
Opens all database tables
OwnCardId()
Returns the ID of the database's current own card
PhonebookGroupIdL()
Returns the ID of the contacts model group which represents the ADN phonebook
PrefTemplateId()
Returns the ID of the database's preferred template, as set by SetPrefTemplateL()
ReadContactAndAgentL()
Reads a contact item and an agent if the item has an agent field
ReadContactL()
Reads a contact item without locking it
ReadContactL()
Reads a contact item without locking it
ReadContactLC()
Reads a contact item without locking it
ReadContactLC()
Reads a contact item without locking it
ReadContactTextDefL()
Reads text into a descriptor from a pre-loaded contact item
ReadContactTextDefL()
Reads text into a descriptor from a pre-loaded contact item, using the specified text definition
ReadContactTextDefL()
Reads text from a contact item stored in the database into a descriptor
ReadContactTextDefL()
Reads text from a contact item stored in the database into a descriptor using the specified text definition
ReadMinimalContactL()
Reads a contact item (contact card, own card, template, or contact group), but does not read the group or template information
ReadMinimalContactLC()
Reads a contact item (contact card, own card, template, or contact group), but does not read the group or template information
RecoverL()
Recovers the database from a rollback
RemoveContactFromGroupL()
Removes the association between a contact item and a group
RemoveContactFromGroupL()
Removes the association between a contact item and a group
RemoveSpeedDialFieldL()
Removes the mapping between a contact item field and a speed dial position
ReplaceL()
Creates and opens an empty contact database, replacing the existing default database
ReplaceL()
Creates and opens an empty contact database, replacing any existing file with the same name
RestoreSortOrderL()
This function is not currently supported
SetCurrentDatabase()
Where there are multiple contact databases on a device, this function can be used to set a database as the current one
SetCurrentItem()
Sets the ID of the current item and persists it in the database
SetDatabaseDriveL()
Sets the contact database drive and optionally moves the default contact database from its current location to the new drive
SetDateFormatTextL()
This function is not currently supported
SetDbViewContactType()
Sets the type of contact items to be included in sorted views of the database
SetFieldAsSpeedDialL()
Sets a field containing a telephone number as a speed dial field
SetLastSyncDateL()
Sets the date/time the database was last synchronised
SetLastSyncDateL()
Sets the date/time the database was last synchronised
SetOwnCardL()
Sets an existing contact item to be the database's current own card
SetPrefTemplateL()
Sets the database's preferred template
SetSortedItemsList()
This method allows clients of contacts model to set the sorted item list and sort order from a default sort order server as
proposed for Crystal 6.0
SetTextDefinitionL()
Sets the text definition
SetViewDefinitionL()
Sets the default view definition
SortArrayL()
Sorts an array of contact IDs
SortArrayLC()
Sorts an array of contact IDs
SortAsyncL()
aSortOrder is owned by the idle sorter
SortAsyncL()
aSortOrder is owned by the idle sorter
SortByTypeL()
Sorts the database using the view type value set by SetDbViewContactType()
SortL()
Sorts the database
SortOrder()
Gets the array of sort preferences
SortedItemsL()
Returns a pointer to the array of contact items which have been sorted by either SortByTypeL() or SortL()
StoreSortOrderL()
This function is not currently supported
TContactViewFilter
Contact view filter flags
TDbConnState
State of database connection
TDirection
Currently unused
TOptions
Import and export format flags
TSortPref
Specifies the field type and order preferences used for sorting items in the contacts database
TTextFieldMinimal
A text buffer of KTextFieldMinimalLength used during sorting and searching of contacts
TThreadAccess
Specifies whether the database can be accessed from single or multiple threads
TemplateContentType()
Gets the content type of the template field which a specified field maps onto
TemplateCount()
Gets the number of contact card templates that exist in the database
TemplateId()
Gets the ID of the system template
TextDefinition()
Gets a pointer to the text definition
Version()
Gets the contact model's version number
WastedSpaceInBytes()
Gets the amount of wasted space in the database in bytes
doAddNewContactL()
Adds a new contact item to the database and returns its ID
~CContactDatabase()
Frees all resources owned by the contact database, prior to its destruction
Inherited from CBase
:
Construction and destruction
IMPORT_C ~CContactDatabase();
Description
Frees all resources owned by the contact database, prior to its destruction.
static IMPORT_C CContactDatabase *OpenL(TThreadAccess aAccess=ESingleThread);
Description
Opens the default contact database.
Note: clients should not assume any knowledge of the default database name or location because they may be changed in future
releases.
Parameters
TThreadAccess aAccess |
The default (ESingleThread) allows access to the session with the database server from a single client thread only (as in
v5 and v5.1). EMultiThread allows multiple client threads to share the same session with the server. As multi-threaded programs
are uncommon in Symbian OS, this argument can be ignored by most C++ developers
|
|
Return value
Leave codes
KErrNotFound |
The database file was not found or it did not have the correct UIDs.
|
KErrLocked |
Another client is writing to the database.
|
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
|
static IMPORT_C CContactDatabase *OpenL(const TDesC &aFileName, TThreadAccess aAccess=ESingleThread);
Description
Opens a named contact database.
From v9.0 onwards, contact databases can only be located in the correct data caged subdirectory. The filenames must have no
path, for example c:contacts.cdb. The maximum length for the drive, filename and extension is 190 characters, and empty string
is not accepted.
Parameters
const TDesC &aFileName |
The filename of the database to open.
|
TThreadAccess aAccess |
The default (ESingleThread) allows access to the session with the database server from a single client thread only (as in
v5 and v5.1). EMultiThread allows multiple client threads to share the same session with the server. As multi-threaded programs
are uncommon in Symbian OS, this argument can be ignored by most C++ developers
|
|
Return value
Leave codes
KErrNotFound |
The database file was not found or it did not have the correct UIDs.
|
KErrLocked |
Another client is writing to the database.
|
KErrBadName |
The filename is invalid; for example it contains wildcard characters or the drive is missing.
|
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
KErrArgument |
if the given descriptor contains more than the maximum length of 190 characters.
|
|
Capability: |
WriteUserData |
|
static IMPORT_C CContactDatabase *CreateL(TThreadAccess aAccess=ESingleThread);
Description
Creates and opens an empty contact database using the default database name.
Parameters
TThreadAccess aAccess |
The default (ESingleThread) allows access to the session with the database server from a single client thread only (as in
v5 and v5.1). EMultiThread allows multiple client threads to share the same session with the server. As multi-threaded programs
are uncommon in Symbian OS, this argument can be ignored by most C++ developers
|
|
Return value
Leave codes
KErrAlreadyExists |
The database already exists.
|
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
|
Capability: |
WriteUserData |
|
static IMPORT_C CContactDatabase *CreateL(const TDesC &aFileName, TThreadAccess aAccess=ESingleThread);
Description
Creates and opens a named contact database.
From v9.0 onwards, contact databases can only be located in the correct data caged subdirectory. The filenames must have no
path, for example c:contacts.cdb. The maximum length for the drive, filename and extension is 190 characters.
Parameters
const TDesC &aFileName |
The filename of the database to create.
|
TThreadAccess aAccess |
The default (ESingleThread) allows access to the session with the database server from a single client thread only (as in
v5 and v5.1). EMultiThread allows multiple client threads to share the same session with the server. As multi-threaded programs
are uncommon in Symbian OS, this argument can be ignored by most C++ developers
|
|
Return value
Leave codes
KErrAlreadyExists |
The database already exists.
|
KErrBadName |
The filename is invalid; for example it contains wildcard characters or the drive letter is missing.
|
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
KErrArgument |
if the given descriptor contains more than the maximum length of 190 characters.
|
|
Capability: |
WriteUserData |
|
static IMPORT_C CContactDatabase *ReplaceL(TThreadAccess aAccess=ESingleThread);
Description
Creates and opens an empty contact database, replacing the existing default database.
Parameters
TThreadAccess aAccess |
The default (ESingleThread) allows access to the session with the database server from a single client thread only (as in
v5 and v5.1). EMultiThread allows multiple client threads to share the same session with the server. As multi-threaded programs
are uncommon in Symbian OS, this argument can be ignored by most C++ developers
|
|
Return value
Leave codes
KErrInUse |
Another client has an open connection to the database.
|
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
|
Capability: |
WriteUserData |
|
static IMPORT_C CContactDatabase *ReplaceL(const TDesC &aFileName, TThreadAccess aAccess=ESingleThread);
Description
Creates and opens an empty contact database, replacing any existing file with the same name.
From v9.0 onwards, contact databases can only be located in the correct data caged subdirectory. The filenames must have no
path, for example c:contacts.cdb. The maximum length for the drive, filename and extension is 190 characters.
Parameters
const TDesC &aFileName |
The filename of the database to replace.
|
TThreadAccess aAccess |
The default (ESingleThread) allows access to the session with the database server from a single client thread only (as in
v5 and v5.1). EMultiThread allows multiple client threads to share the same session with the server. As multi-threaded programs
are uncommon in Symbian OS, this argument can be ignored by most C++ developers
|
|
Return value
Leave codes
KErrBadName |
The filename is invalid; for example it contains wildcard characters or the drive letter is missing.
|
KErrInUse |
Another client has an open connection to the database.
|
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
KErrArgument |
if the given descriptor contains more than the maximum length of 190 characters.
|
|
static IMPORT_C CContactOpenOperation *Open(TRequestStatus &aStatus, TThreadAccess aAccess=ESingleThread);
Description
Opens the default contact database asynchronously.
The Contacts server is asked to prepare the database to be opened. This may include cleaning up incomplete writes from when
the device was last switched off, or updating the database format.
If an error is encountered starting the asynchronous open the return value is NULL and the error is returned in the TRequestStatus
parameter.
Errors from the asynchronous open include: KErrNotFound The database file was not found or it did not have the correct UIDs.
KErrLocked The file is in use by another client. Other system wide error codes.
If the return value is not NULL the ownership of the CContactOpenOperation
object is passed to the client. This may be deleted before the asynchronous open completes.
When the client supplied TRequestStatus
is completed with KErrNone the TakeDatabase() method of CContactOpenOperation
is called to pass ownership of the open database to the client.
Parameters
TRequestStatus &aStatus |
On return, the request status for the asynchronous phase request. The Open() action can fail with one of the system wide error codes. In this case, the CContactDatabase object cannot access the database
and must be deleted.
|
TThreadAccess aAccess |
This argument should be ignored by developers.
|
|
Return value
CContactOpenOperation *
|
NULL if there is an error starting the asynhchronous open, otherwise a pointer to an active object that manages the open operation.
|
|
See also:
static IMPORT_C CContactOpenOperation *Open(const TDesC &aFileName, TRequestStatus &aStatus, TThreadAccess aAccess=ESingleThread);
Description
Opens a named contact database asynchronously.
The Contacts server is asked to prepare the database to be opened. This may include cleaning up incomplete writes from when
the device was last switched off, or updating the database format.
In v8.1, contact databases can be located in any directory on any writeable drive, and the format of the filename must include
an absolute directory path such as c:\system\data\contacts.cdb.
From v9.0 onwards, contact databases can only be located in the correct data caged subdirectory. The filenames must have no
path, for example c:contacts.cdb. The maximum length for the drive, filename and extension is 190 characters.
If an empty path is entered, it will be treated as a request to open the default contact database.
If an error is encountered starting the asynchronous open the return value is NULL and the error is returned in the TRequestStatus
parameter.
Errors from the asynchronous open include: KErrNotFound The database file was not found or it did not have the correct UIDs.
KErrLocked The file is in use by another client. KErrBadName The filename is invalid; for example it includes wildcard characters
or the drive is missing. Other system wide error codes.
If the return value is not NULL the ownership of the CContactOpenOperation
object is passed to the client. This may be deleted before the asynchronous open completes.
When the client supplied TRequestStatus
is completed with KErrNone the TakeDatabase() method of CContactOpenOperation
is called to pass ownership of the open database to the client.
Parameters
const TDesC &aFileName |
The filename of the database to open.
|
TRequestStatus &aStatus |
On return, the request status for the asynchronous phase request. The Open() action can fail with one of the system wide error codes. In this case the CContactDatabase object cannot access the database
and must be deleted.
|
TThreadAccess aAccess |
This argument should be ignored by developers.
|
|
Return value
CContactOpenOperation *
|
NULL if there is an error starting the asynhchronous open, otherwise a pointer to an active object that manages the open operation.
|
|
See also:
static IMPORT_C TBool DatabaseDrive(TDriveUnit &aDriveUnit);
Description
Gets the current database drive. The database drive is the drive on which the default contact database is located. Note: this
function can leave.
Parameters
TDriveUnit &aDriveUnit |
On return, contains the database drive.
|
|
Return value
TBool
|
ETrue if the database drive has been set using SetDatabaseDriveL() . Otherwise EFalse and in this case, the function returns drive c: in aDriveUnit as the current drive.
|
|
See also:
static inline TInt NullUidValue();
Description
Gets the NULL contact ID value.
Return value
Capability: |
WriteUserData |
|
static IMPORT_C void SetDatabaseDriveL(TDriveUnit aDriveUnit, TBool aCopy=ETrue);
Description
Sets the contact database drive and optionally moves the default contact database from its current location to the new drive.
This function guarantees an all or nothing operation. If the database is not successfully moved, the drive setting is not
updated to reflect the change.
In v8.1 when copying the file is moved to \system\data on the specified drive, and if the destination file already exists
it is replaced.
From v9.0 onwards the file copying goes to the correct data caged directory on the destination drive. If the destination file
already exists the copy fails.
Parameters
TDriveUnit aDriveUnit |
The drive to which to move the database.
|
TBool aCopy |
ETrue moves the existing file to the specified drive. Deletion of the source file will fail if it is in use. EFalse does not
move the file.
|
|
Leave codes
KErrNotReady |
There is no media present in the drive.
|
KErrInUse |
The destination file for the copy is already open.
|
KErrNotFound |
The source file for the copy was not found.
|
KErrAlreadyExists |
The destination file for the copy already exists, (v9.0).
|
|
See also:
static IMPORT_C void GetDefaultNameL(TDes &aDes);
Description
Gets the file name of the default contact database.
By default it is on drive C: but this can be changed using SetDatabaseDriveL()
.
Parameters
TDes &aDes |
On return, contains the drive and filename of the default contact database. From v9.0 onwards, this has the form driveletter:filename,
in other words, it does not include a path.
|
|
See also:
Capability: |
WriteUserData |
|
static IMPORT_C void DeleteDefaultFileL();
Description
Deletes the default contact database.
Leave codes
KErrInUse |
Another client has the database open.
|
KErrNotFound |
The database file was not found or it did not have the correct UIDs.
|
|
See also:
Capability: |
WriteUserData |
|
static IMPORT_C void DeleteDatabaseL(const TDesC &aFileName);
Description
A static method to delete a named contact database.
If the file is found, it is tested for the correct UIDs.
In v8.1, contact databases can be located in any directory on any writeable drive, and the format of the filename must include
an absolute directory path such as c:\system\data\contacts.cdb.
From v9.0 onwards, contact databases can only be located in the correct data caged subdirectory. The filenames must have no
path, for example c:contacts.cdb. The maximum length for the drive, filename and extension is 190 characters.
Parameters
const TDesC &aFileName |
The contact database file to delete.
|
|
Leave codes
KErrBadName |
The filename is invalid; for example it contains wildcard characters or the drive is missing.
|
KErrInUse |
Another client has the database open.
|
KErrNotFound |
The database file was not found or it did not have the correct UIDs.
|
KErrArgument |
if the given descriptor contains more than the maximum length of 190 characters.
|
|
See also:
static IMPORT_C CDesCArray *ListDatabasesL();
Description
A static method to list the contact databases on all drives.
In v8.1, this function finds contact databases located anywhere on the drives, and the format of the returned filenames is
c:\system\data\contacts.cdb.
From v9.0 onwards, this function finds contact databases only in the correct data caged subdirectory. The returned filenames
have no path, for example c:contacts.cdb. The maximum length for the drive, filename and extension is 190 characters.
In either case, the filenames returned are in the correct format for Open()
, OpenL()
, CreateL()
, ReplaceL()
and DeleteDatabaseL()
.
Return value
CDesCArray *
|
An array containing zero or more contact database names.
|
|
Leave codes
KErrNoMemory |
Out of memory.
|
|
static IMPORT_C CDesCArray *ListDatabasesL(TDriveUnit aDriveUnit);
Description
A static method to list the contact databases on a specified drive.
In v8.1, this function finds contact databases located anywhere on the drive, and the format of the returned filenames is
c:\system\data\contacts.cdb.
From v9.0 onwards, this function finds contact databases only in the correct data caged subdirectory. The returned filenames
have no path, for example c:contacts.cdb. The maximum length for the drive, filename and extension is 190 characters.
In either case, the filenames returned are in the correct format for Open()
, OpenL()
, CreateL()
, ReplaceL()
and DeleteDatabaseL()
.
Parameters
TDriveUnit aDriveUnit |
The drive unit to search for contact databases.
|
|
Return value
CDesCArray *
|
An array containing zero or more contact database names.
|
|
Leave codes
KErrNoMemory |
Out of memory.
|
|
DefaultContactDatabaseExistsL()
static IMPORT_C TBool DefaultContactDatabaseExistsL();
Description
A static method to determine if the default contact database exists.
It searches the drive set by SetDatabaseDriveL()
, or if no drive has been set, it searches drive c:.
If the file is found, it is tested for the correct UIDs.
Return value
TBool
|
ETrue if the file is found, EFalse otherwise.
|
|
Leave codes
KErrNotReady |
There is no media present in the drive.
|
KErrNotFound |
The database file was not found or it did not have the correct UIDs.
|
KErrCorrupt |
The file is not a valid database
|
|
See also:
static IMPORT_C TBool ContactDatabaseExistsL(const TDesC &aFileName);
Description
A method to determine if a named contact database exists.
If the file is found, it is tested for the correct UIDs.
In v8.1, contact databases can be located in any directory on any writeable drive, and the format of the filename must include
an absolute directory path such as c:\system\data\contacts.cdb.
From v9.0 onwards, contact databases can only be located in the correct data caged subdirectory. The filenames must have no
path, for example c:contacts.cdb. The maximum length for the drive, filename and extension is 190 characters.
Parameters
const TDesC &aFileName |
The contact database to search for.
|
|
Return value
TBool
|
ETrue if the file is found, EFalse otherwise.
|
|
Leave codes
KErrNotReady |
There is no media present in the drive.
|
KErrBadName |
The filename is invalid; for example it contains wildcard characters or the drive is missing.
|
KErrNotFound |
The database file was not found or it did not have the correct UIDs.
|
KErrCorrupt |
The file is not a valid database
|
KErrArgument |
if the given descriptor contains more than the maximum length of 190 characters.
|
|
See also:
Capability: |
WriteUserData |
|
IMPORT_C void SetViewDefinitionL(CContactViewDef *aView);
Description
Sets the default view definition. The contact database takes ownership of the view definition specified. The default view
definition is used in calls to ReadContactL()
, ReadContactLC()
and ReadContactAndAgentL()
when no view definition is explicitly specified.
Parameters
CContactViewDef *aView |
The view definition. This method does nothing if this is null.
|
|
IMPORT_C void SetTextDefinitionL(CContactTextDef *aView);
Description
Sets the text definition. The contact database takes ownership of the text definition specified.
Parameters
IMPORT_C const CContactTextDef *TextDefinition() const;
Description
Gets a pointer to the text definition.
Return value
Interface status: |
deprecated |
|
Capability: |
Illegal |
|
IMPORT_C TInt CountL();
Description
Gets the number of CContactItems in the database. The count includes non-system template items. It does not include items
marked as deleted.
Return value
TInt
|
The number of contact items in the database.
|
|
Interface status: |
deprecated |
|
Capability: |
Illegal |
|
IMPORT_C void SetDbViewContactType(const TUid aUid);
Description
Sets the type of contact items to be included in sorted views of the database.
See also SortL()
and SortByTypeL()
.
This value is initialised to KUidContactItem when the database is opened. This means that all CContactItem-derived types (cards,
non-system templates, groups, own cards) are included in database views.
Parameters
const TUid aUid |
Specifies a contact type. One of the following: KUidContactCard (contact cards), KUidContactGroup (contact item groups), KUidContactOwnCard
(own cards), KUidContactCardTemplate (templates which are not system templates, in other words, which have been added to the
database), KUidContactItem (all of the above)
|
|
Interface status: |
deprecated |
|
IMPORT_C TUid GetDbViewContactType() const;
Description
Gets the type of contact items which are included in sorted views of the database, as set by SetDbViewContactType()
.
Return value
TUid
|
Specifies a contact type. One of the following: KUidContactCard (contact cards), KUidContactGroup (contact item groups), KUidContactOwnCard
(own cards), KUidContactCardTemplate (templates which are not system, in other words, which have been added to the database),
KUidContactItem (all of the above)
|
|
Capability: |
WriteUserData |
|
IMPORT_C TContactItemId AddNewContactL(CContactItem &aContact);
Description
Adds a new contact item to the database and returns its ID.
Parameters
CContactItem &aContact |
The contact item to add to the database.
|
|
Return value
Leave codes
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
|
Capability: |
WriteUserData |
|
IMPORT_C CContactItem *CreateContactGroupL(TBool aInTransaction=EFalse);
Description
Creates a new contact group with a default label of 'Group Label' and adds it to the database.
The caller takes ownership of the returned object.
Parameters
TBool aInTransaction |
This argument should be ignored by developers.
|
|
Return value
Capability: |
WriteUserData |
|
IMPORT_C CContactItem *CreateContactGroupLC(TBool aInTransaction=EFalse);
Description
Creates a new contact group with a default label of 'Group Label' and adds it to the database.
The caller takes ownership of the returned object.
Parameters
TBool aInTransaction |
This argument should be ignored by developers.
|
|
Return value
Capability: |
WriteUserData |
|
IMPORT_C CContactItem *CreateContactGroupL(const TDesC &aGroupLabel, TBool aInTransaction=EFalse);
Description
Creates a new contact group with a specified label and adds it to the database.
The caller takes ownership of the returned object.
Parameters
const TDesC &aGroupLabel |
The string to set as the group label.
|
TBool aInTransaction |
This argument should be ignored by developers.
|
|
Return value
Capability: |
WriteUserData |
|
IMPORT_C CContactItem *CreateContactGroupLC(const TDesC &aGroupLabel, TBool aInTransaction=EFalse);
Description
Creates a new contact group with a specified label and adds it to the database.
The pointer to the group is left on the cleanup stack. The caller takes ownership of the returned object.
Parameters
const TDesC &aGroupLabel |
The string to set as the group label.
|
TBool aInTransaction |
This argument should be ignored by developers.
|
|
Return value
Leave codes
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
|
CreateContactCardTemplateL()
Capability: |
WriteUserData |
|
IMPORT_C CContactItem *CreateContactCardTemplateL(const TDesC &aTemplateLabel, TBool aInTransaction=EFalse);
Description
Creates a contact card template based on the system template and adds it to the database.
A template label must be specifed. This can be changed later using CContactCardTemplate::SetTemplateLabelL()
.
The caller takes ownership of the returned object.
Parameters
const TDesC &aTemplateLabel |
The string to set as the template label.
|
TBool aInTransaction |
This argument should be ignored by developers.
|
|
Return value
CreateContactCardTemplateLC()
Capability: |
WriteUserData |
|
IMPORT_C CContactItem *CreateContactCardTemplateLC(const TDesC &aTemplateLabel, TBool aInTransaction=EFalse);
Description
Creates a contact card template based on the system template and adds it to the database.
A template label must be specifed. This can be changed later using CContactCardTemplate::SetTemplateLabelL()
.
The pointer to the template is left on the cleanup stack. The caller takes ownership of the returned object.
Parameters
const TDesC &aTemplateLabel |
The string to set as the template label.
|
TBool aInTransaction |
This argument should be ignored by developers.
|
|
Return value
Leave codes
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
|
CreateContactCardTemplateL()
Capability: |
WriteUserData |
|
IMPORT_C CContactItem *CreateContactCardTemplateL(const CContactItem *aTemplate, const TDesC &aTemplateLabel, TBool aInTransaction=EFalse);
Description
Creates a contact card template and adds it to the database.
The new template's field set is based on the specified contact item. This could be a contact card, an own card, another template
or even a group. Note that no field data is copied into the new template. All of the new template's fields are marked as template
fields.
A template label must be specifed. This can be changed later using CContactCardTemplate::SetTemplateLabelL()
.
The caller takes ownership of the returned object.
Parameters
const CContactItem *aTemplate |
Pointer to an instance of a CContactItem-derived class. This is used to initialise the new template's field set.
|
const TDesC &aTemplateLabel |
The string to set as the template label.
|
TBool aInTransaction |
This argument should be ignored by developers.
|
|
Return value
CreateContactCardTemplateLC()
Capability: |
WriteUserData |
|
IMPORT_C CContactItem *CreateContactCardTemplateLC(const CContactItem *aTemplate, const TDesC &aTemplateLabel, TBool aInTransaction=EFalse);
Description
Creates a contact card template and adds it to the database.
The new template's field set is based on the specified contact item. This could be a contact card, an own card, another template
or even a group. Note that no field data is copied into the new template. All of the new template's fields are marked as template
fields.
A template label must be specifed. This can be changed later using CContactCardTemplate::SetTemplateLabelL()
.
The pointer to the object is left on the cleanup stack. The caller takes ownership of it.
Parameters
const CContactItem *aTemplate |
Pointer to an instance of a CContactItem-derived class. This is used to initialise the new template's field set.
|
const TDesC &aTemplateLabel |
The string to set as the template label.
|
TBool aInTransaction |
This argument should be ignored by developers.
|
|
Return value
Leave codes
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
|
IMPORT_C CContactIdArray *GetCardTemplateIdListL() const;
Description
Gets a copy of the database's template ID list. This is a list of the IDs of all contact card templates which have been added
to the database. The caller takes ownership of the returned object.
Return value
CContactIdArray *
|
Pointer to a copy of the database's template ID list. This does not include the system template. NULL if there are no templates
in the database.
|
|
IMPORT_C CContactIdArray *GetGroupIdListL() const;
Description
Returns a copy of the database's group ID list. This is a list which contains the contact item IDs for each group in the database.
The caller takes ownership of the returned object.
Return value
CContactIdArray *
|
Pointer to an array containing the contact item IDs for each group in the database. NULL if there are no groups in the database.
|
|
Capability: |
WriteUserData |
|
IMPORT_C void AddContactToGroupL(TContactItemId aItemId, TContactItemId aGroupId);
Description
Sets a contact item in the database to be a member of a contact group.
The item and group are identified by their IDs.
Parameters
TContactItemId aItemId |
The ID of the item to add to the group.
|
TContactItemId aGroupId |
The ID of the group to which the item should be added.
|
|
Leave codes
KErrNotFound |
Either the group or the item does not exist.
|
KErrNotSupported |
The group is not of type KUidContactGroup.
|
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
|
Capability: |
WriteUserData |
|
IMPORT_C void AddContactToGroupL(CContactItem &aItem, CContactItem &aGroup);
Description
Sets a contact item in the database to be a member of a contact group.
Parameters
Leave codes
KErrNotFound |
Either the group or the item does not exist in the database.
|
KErrNotSupported |
The group is not of type KUidContactGroup.
|
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
|
Capability: |
WriteUserData |
|
IMPORT_C void AddContactToGroupL(TContactItemId aItemId, TContactItemId aGroupId, TBool aInTransaction);
Description
Sets a contact item in the database to be a member of a contact group.
The item and group are identified by their IDs.
Parameters
TContactItemId aItemId |
The ID of the item to add to the group.
|
TContactItemId aGroupId |
The ID of the group to which the item should be added.
|
TBool aInTransaction |
This argument should be ignored by developers.
|
|
Leave codes
KErrNotFound |
Either the group or the item does not exist.
|
KErrNotSupported |
The group is not of type KUidContactGroup.
|
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
|
RemoveContactFromGroupL()
Capability: |
WriteUserData |
|
IMPORT_C void RemoveContactFromGroupL(CContactItem &aItem, CContactItem &aGroup);
Description
Removes the association between a contact item and a group.
Parameters
Leave codes
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
|
RemoveContactFromGroupL()
Capability: |
WriteUserData |
|
IMPORT_C void RemoveContactFromGroupL(TContactItemId aItemId, TContactItemId aGroupId);
Description
Removes the association between a contact item and a group.
The item and group are identified by their IDs.
Parameters
Leave codes
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
|
Interface status: |
deprecated |
|
inline TInt GroupCount() const;
Description
Gets the number of groups that exist in the database.
Return value
TInt
|
The number of groups that exist in the database.
|
|
Interface status: |
deprecated |
|
inline TInt TemplateCount() const;
Description
Gets the number of contact card templates that exist in the database. This does not include the system template.
Return value
TInt
|
The number of contact card templates that exist in the database.
|
|
Capability: |
ReadUserData |
|
Capability: |
WriteUserData |
|
IMPORT_C void SetFieldAsSpeedDialL(CContactItem &aItem, TInt aFieldIndex, TInt aSpeedDialPosition);
Description
Sets a field containing a telephone number as a speed dial field. The field is identified by aFieldIndex within the contact
item aItem. It is assigned a speed dial position between 1 and 9 inclusive.
The field's speed dial and user added attributes are set and the appropriate UID (KUidSpeedDialXxx) is added to the field's
content type. The changes are committed to the database.
Notes:
If an item's telephone number field has already been assigned to position aSpeedDialPosition, that item is updated so that
the speed dial attribute is removed from its field and the speed dial field type UID is removed from the field's content type,
before the new speed dial field is set.
The speed dial attribute can be tested for using the CContactItemField::IsSpeedDial()
function.
The contact item passed to this function (aItem) must have been obtained using one of the variants of CContactDatabase::OpenContactL()
. This is because it is modified and committed to the database by this function - no further commits are necessary.
Parameters
CContactItem &aItem |
The contact item containing the field to set as a speed dial field.
|
TInt aFieldIndex |
Index of a field in aItem's field set to set as a speed dial field.
|
TInt aSpeedDialPosition |
The speed dial position. This is an integer in the range 1 to 9 inclusive. If outside this range, the function leaves with
KErrArgument.
|
|
Leave codes
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
|
IMPORT_C TContactItemId GetSpeedDialFieldL(TInt aSpeedDialPosition, TDes &aPhoneNumber);
Description
Returns the ID of the contact item whose telephone number field is mapped to the speed dial position specified. This function
is provided so that information may be displayed about a contact item whose telephone number is being dialled using speed
dialling.
The function also retrieves the telephone number stored in the field.
Parameters
TInt aSpeedDialPosition |
The speed dial position. This is an integer in the range 1 to 9 inclusive. If outside this range, the function leaves with
KErrArgument.
|
TDes &aPhoneNumber |
On return, contains the telephone number which is mapped to the speed dial position specified. Returns KNullDesC if the speed
dial position requested has not been set.
|
|
Return value
TContactItemId
|
The ID of the contact item for which the speed dial has been set.
|
|
Capability: |
ReadUserData |
|
Capability: |
WriteUserData |
|
IMPORT_C void RemoveSpeedDialFieldL(TContactItemId aContactId, TInt aSpeedDialPosition);
Description
Removes the mapping between a contact item field and a speed dial position.
Removes the KUidSpeedDialXxx UID from the field's content type, removes the field's speed dial attribute and commits the changes
to the item.
Parameters
TContactItemId aContactId |
The ID of the contact item containing the speed dial field.
|
TInt aSpeedDialPosition |
The speed dial position. This is an integer in the range 1 to 9 inclusive. If outside this range, the function leaves with
KErrArgument.
|
|
Leave codes
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
|
IMPORT_C CContactItem *ReadMinimalContactL(TContactItemId aContactId);
Description
Reads a contact item (contact card, own card, template, or contact group), but does not read the group or template information.
This function is identical to the variant of ReadContactL()
which uses the database's default view definition, except that this function does not read:
-
the list of group members and the group label (if the item is a CContactGroup
)
-
the template label (if the item is a CContactCardTemplate
)
-
the list of groups to which the item belongs, if any (not applicable to templates)
-
any fields inherited from a non-system template, if any (not applicable if the item is a CContactCardTemplate
)
Notes:
This function is faster than the standard reading function (ReadContactL()
), which needs to match the template fields and groups etc.
The caller takes ownership of the returned object.
Parameters
Return value
CContactItem *
|
Pointer to the contact whose ID is aContactId.
|
|
Leave codes
KErrNotFound |
The specified contact item cannot be found in the database.
|
|
IMPORT_C CContactItem *ReadMinimalContactLC(TContactItemId aContactId);
Description
Reads a contact item (contact card, own card, template, or contact group), but does not read the group or template information.
This function is identical to the variant of ReadContactLC()
which uses the server's default view definition, except that this function does not read:
-
the list of group members and the group label (if the item is a CContactGroup
)
-
the template label (if the item is a CContactCardTemplate
)
-
the list of groups to which the item belongs, if any (not applicable to templates)
-
any fields inherited from a non-system template, if any (not applicable if the item is a CContactCardTemplate
)
Notes:
This function is faster than the standard reading function (ReadContactLC()
), which needs to match the template fields and groups etc.
The caller takes ownership of the returned object.
Parameters
Return value
CContactItem *
|
Pointer to the contact whose ID is aContactId. The contact is left on the cleanup stack.
|
|
Leave codes
KErrNotFound |
The specified contact item cannot be found in the database.
|
|
IMPORT_C CContactItem *ReadContactL(TContactItemId aContactId);
Description
Reads a contact item without locking it.
This function uses the default view definition (as set by SetViewDefinitionL()
). The caller takes ownership of the returned object.
Parameters
Return value
Leave codes
KErrNotFound |
The specified contact item does not exist in the database.
|
|
IMPORT_C CArrayPtr< CContactItem > *ReadContactAndAgentL(TContactItemId aContactId);
Description
Reads a contact item and an agent if the item has an agent field. The item and agent (if present) are returned in an array.
The function uses the database's default view definition (as set by SetViewDefinitionL()
). The caller takes ownership of the returned object.
Parameters
Return value
Leave codes
KErrNotFound |
The specified contact item cannot be found in the database.
|
|
IMPORT_C CContactItem *ReadContactL(TContactItemId aContactId, const CContactItemViewDef &aViewDef);
Description
Reads a contact item without locking it.
This function uses the view definition specified. The caller takes ownership of the returned object.
Parameters
Return value
Leave codes
KErrNotFound |
The specified contact item does not exist in the database.
|
|
IMPORT_C CContactItem *ReadContactLC(TContactItemId aContactId);
Description
Reads a contact item without locking it.
This function uses the default view definition (as set by SetViewDefinitionL()
). The caller takes ownership of the returned object.
Parameters
Return value
CContactItem *
|
Pointer to the contact item. This is left on the cleanup stack.
|
|
Leave codes
KErrNotFound |
The specified contact item does not exist in the database.
|
|
IMPORT_C CContactItem *ReadContactLC(TContactItemId aContactId, const CContactItemViewDef &aViewDef);
Description
Reads a contact item without locking it.
This function uses the view definition specified. The caller takes ownership of the returned object.
Parameters
Return value
CContactItem *
|
Pointer to the contact item. This is left on the cleanup stack.
|
|
Leave codes
KErrNotFound |
The specified contact item does not exist in the database.
|
|
IMPORT_C void ReadContactTextDefL(const CContactItem &aItem, TDes &aResult);
Description
Reads text into a descriptor from a pre-loaded contact item.
This function uses the database's current text definition (as set using CContactDatabase::SetTextDefinitionL()
).
Parameters
const CContactItem &aItem |
The contact item to read.
|
TDes &aResult |
On return, contains the text read from the contact item aItem, using the database's current text definition.
|
|
IMPORT_C void ReadContactTextDefL(const CContactItem &aItem, TDes &aResult, CContactTextDef *aTextDef);
Description
Reads text into a descriptor from a pre-loaded contact item, using the specified text definition.
Parameters
const CContactItem &aItem |
The contact item to read.
|
TDes &aResult |
On return, contains the text read from the contact item aItem, using the text definition specified in aTextDef.
|
CContactTextDef *aTextDef |
The text definition to use.
|
|
IMPORT_C void ReadContactTextDefL(TContactItemId aContactId, TDes &aResult);
Description
Reads text from a contact item stored in the database into a descriptor.
This function uses the database's currently set text definition (as set using CContactDatabase::SetTextDefinitionL()
).
Parameters
TContactItemId aContactId |
The ID of the contact to read.
|
TDes &aResult |
On return, contains the text read from the contact item identified by aContactId, using the database's current text definition.
|
|
Leave codes
KErrNotFound |
The specified contact item cannot be found in the database.
|
|
IMPORT_C void ReadContactTextDefL(TContactItemId aContactId, TDes &aResult, CContactTextDef *aTextDef);
Description
Reads text from a contact item stored in the database into a descriptor using the specified text definition.
Parameters
TContactItemId aContactId |
The ID of the contact to read.
|
TDes &aResult |
On return, contains the text read from the contact item identified by aContactId, using the text definition specified in aTextDef.
|
CContactTextDef *aTextDef |
The text definition to use.
|
|
Leave codes
KErrNotFound |
The specified contact item cannot be found in the database.
|
|
Capability: |
WriteUserData |
|
IMPORT_C CContactItem *OpenContactL(TContactItemId aContactId);
Description
Opens a contact item for editing.
The returned contact item is locked and left open until either CommitContactL()
or CloseContactL()
is called.
This function uses a view definition that loads every field. If you need to specify your own view definition use the other
overload of this function.
The caller takes ownership of the returned object.
Parameters
Return value
Leave codes
KErrInUse |
The contact item is already open.
|
KErrNotFound |
The contact item is not present in the database.
|
|
Interface status: |
deprecated |
|
Capability: |
WriteUserData |
|
IMPORT_C CContactItem *OpenContactL(TContactItemId aContactId, const CContactItemViewDef &aViewDef);
Description
Opens a contact item for editing, leaving the lock record on the cleanup stack.
The returned item is locked and left open until either CommitContactL()
or CloseContactL()
is called.
This function uses the specified view definition. Note: Care should be taken when specifying a view definition because when
committing the contact item any fields not loaded by the view definition are deleted from the item.
The caller takes ownership of the returned object.
Parameters
Return value
Leave codes
KErrInUse |
The contact item is already open
|
KErrNotFound |
The contact item is not present in the database.
|
|
Interface status: |
deprecated |
|
Capability: |
WriteUserData |
|
IMPORT_C CContactItem *OpenContactLX(TContactItemId aContactId);
Description
Opens a contact item for editing using a specified view definition.
The returned contact item is locked and left open until either CommitContactL()
or CloseContactL()
is called.
Note: care should be taken when specifying a view definition because when committing the contact item, any fields not loaded
by the view definition are deleted from the item.
The caller takes ownership of the returned object.
Parameters
Return value
Leave codes
KErrInUse |
The contact item is already open.
|
KErrNotFound |
The contact item is not present in the database.
|
|
Interface status: |
deprecated |
|
Capability: |
WriteUserData |
|
IMPORT_C CContactItem *OpenContactLX(TContactItemId aContactId, const CContactItemViewDef &aViewDef);
Description
Opens a contact item for editing, leaving the lock record on the cleanup stack.
The returned item is locked and left open until either CommitContactL()
or CloseContactL()
is called.
This function uses the specified view definition. Note: Care should be taken when specifying a view definition because when
committing the contact item any fields not loaded by the view definition are deleted from the item.
The caller takes ownership of the returned object.
Parameters
Return value
Leave codes
KErrInUse |
The contact item is already open
|
KErrNotFound |
The contact item is not present in the database.
|
|
IMPORT_C void CloseContactL(TContactItemId aContactId);
Description
Closes the contact item, allowing other applications to access it. Specifying a contact item that is not open, or cannot be
found, is harmless. This function does not commit any changes made to the item. Despite the trailing L in the function's name,
this function cannot leave.
Parameters
Capability: |
ReadUserData |
|
Capability: |
WriteUserData |
|
IMPORT_C void CommitContactL(const CContactItem &aContact);
Description
Overwrites a contact item with the values contained in aContact. The contact item is also closed by this call.
Parameters
const CContactItem &aContact |
Contains the new values for the contact item.
|
|
Leave codes
KErrAccessDenied |
The contact item is not locked by the caller.
|
KErrNotFound |
The contact item's ID is not present in the database.
|
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
KErrNotSupported |
The contact item cannot be committed because it contains invalid data.
|
|
Capability: |
ReadUserData |
|
Capability: |
WriteUserData |
|
IMPORT_C void DeleteContactL(TContactItemId aContactId);
Description
Deletes a contact item.
Note: if the contact's access count is greater than zero, the contact is not fully deleted from the database. A 'skeleton'
of the contact is left, containing only basic information, and no field data. The skeleton contact can still be accessed if
a record of its contact ID has been retained (or call DeletedContactsLC()
). The skeleton is removed when the access count is zero.
Parameters
TContactItemId aContactId |
The contact item ID of the contact to delete.
|
|
Leave codes
KErrNotFound |
aContactId is not present in the database.
|
KErrInUse |
The contact item is open.
|
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
|
Capability: |
ReadUserData |
|
Capability: |
WriteUserData |
|
IMPORT_C void DeleteContactsL(const CContactIdArray &aContactIds);
Description
Deletes an array of contacts.
The function commits the changes for every 32 (for 9.5 onwards it commits after every 50) contacts deleted, and compresses
the database as required. A changed message is not sent for every contact deleted, instead a single unknown change event message
(EContactDbObserverEventUnknownChanges) is sent after all the contacts have been deleted and the changes committed.
Parameters
Leave codes
KErrNotFound |
A contact item ID contained in the array is not present in the database.
|
KErrInUse |
One or more of the contact items is open.
|
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
|
Capability: |
WriteUserData |
|
IMPORT_C CArrayPtr< CContactItem > *ImportContactsL(const TUid &aFormat, RReadStream &aReadStream, TBool &aImportSuccessful,
TInt aOption);
Description
Imports one or more vCards from a read stream. The vCards are converted into contact items, and added to the database. If
at least one contact item was successfully imported, aImportSuccessful is set to ETrue. If EImportSingleContact is specified
in aOption, the read stream marker is left at the next position, ready to read the next contact item. The caller takes ownership
of the returned object.
Parameters
const TUid &aFormat |
Indicates the format for imported and exported contacts. Its value must be KUidVCardConvDefaultImpl.
|
RReadStream &aReadStream |
The stream to read from.
|
TBool &aImportSuccessful |
On return, ETrue if at least one contact was successfully imported. EFalse if not.
|
TInt aOption |
Indicates the options for import and export. See the TOptions enum.
|
|
Return value
Leave codes
KErrNotSupported |
aFormat.iUid is not KUidVCardConvDefaultImpl.
|
|
ExportSelectedContactsL()
IMPORT_C void ExportSelectedContactsL(const TUid &aFormat, const CContactIdArray &aSelectedContactIds, RWriteStream &aWriteStream,
TInt aOption, TBool aExportPrivateFields=ETrue);
Description
Converts an array of contact items to vCards and exports them to a write stream.
The default character set CVersitParser::EUTF8CharSet is used to convert into. If you need a different character set, use
the other overload of this function.
Parameters
const TUid &aFormat |
Indicates the format for imported and exported contacts. Must have a value of KUidVCardConvDefaultImpl.
|
const CContactIdArray &aSelectedContactIds |
Array of contact IDs to export.
|
RWriteStream &aWriteStream |
The stream to write to.
|
TInt aOption |
Indicates the options for import and export. See the TOptions enum.
|
TBool aExportPrivateFields |
ETrue exports fields marked as private. EFalse does not export fields marked as private. See CContactItemField::SetPrivate() .
|
|
Leave codes
KErrNotSupported |
aFormat.iUid is not KUidVCardConvDefaultImpl.
|
KErrNotFound |
One or more of the contact items does not exist in the database.
|
|
ExportSelectedContactsL()
IMPORT_C void ExportSelectedContactsL(const TUid &aFormat, const CContactIdArray &aSelectedContactIds, RWriteStream &aWriteStream,
TInt aOption, const Versit::TVersitCharSet aCharSet, TBool aExportPrivateFields=ETrue);
Description
Converts an array of contact items to vCards and exports them to a write stream using the specified character set.
Parameters
const TUid &aFormat |
Indicates the format for imported and exported contacts. Must have a value of KUidVCardConvDefaultImpl.
|
const CContactIdArray &aSelectedContactIds |
Array of contact IDs to export.
|
RWriteStream &aWriteStream |
The stream to write to.
|
TInt aOption |
Indicates the options for import and export. See the TOptions enum.
|
const Versit::TVersitCharSet aCharSet |
The character set to convert into.
|
TBool aExportPrivateFields |
ETrue exports fields marked as private. EFalse does not export fields marked as private. See CContactItemField::SetPrivate() .
|
|
Leave codes
KErrNotSupported |
aFormat.iUid is not KUidVCardConvDefaultImpl.
|
KErrNotFound |
One or more of the contact items does not exist in the database.
|
|
Capability: |
WriteUserData |
|
IMPORT_C void CompactL();
Description
Compacts the database to its minimum size synchronously.
IMPORT_C CContactIdArray *FindLC(const TDesC &aText, const CContactItemFieldDef *aFieldDef);
Description
Searches the database for a text string. The function searches the fields contained in the field definition. The caller takes
ownership of the returned object. There is a limit of 255 characters on the search string length, due to the implementation
of the DBMS API, which also has a search string length restriction of 255 chars. If the search string passed in is over 255
characters this method will leave with KErrArgument.
Parameters
Return value
CContactIdArray *
|
Array of contact IDs identifying the contact items which contain the specified text.
|
|
IMPORT_C CIdleFinder *FindAsyncL(const TDesC &aText, const CContactItemFieldDef *aFieldDef, MIdleFindObserver *aObserver);
Description
Searches the database asynchronously for a text string. The function searches the fields contained in the field definition
asynchronously using the MIdleFindObserver
and CIdleFinder
classes. The caller takes ownership of the returned object.
Parameters
const TDesC &aText |
The text to search for.
|
const CContactItemFieldDef *aFieldDef |
Specifies the fields to search.
|
MIdleFindObserver *aObserver |
Implements the callback function IdleFindCallback(). NULL if no observer is needed.
|
|
Return value
CIdleFinder *
|
A CIdle-derived object which provides information about the progress of the operation, and which can be used to retrieve an
array of contact IDs.
|
|
IMPORT_C CContactIdArray *FindInTextDefLC(const MDesC16Array &aFindWords, const TCallBack &aWordParserCallback);
Description
Enables the user to search the database for a string containing text that is stored in one or more fields.
The string is specified as an array of words.
For example, a user might want to search for the string "John Smith". To the user the string is a single item, but the text
which makes up the string is stored in two separate fields in the database.
The caller of this function needs to provide an array of words to find (aFindWords), and a function to break down the text
in the contact item into a list of words (aWordParserCallback).
The array of words to find would typically not contain punctuation. For example if the user searches for 'Smith, John' this
would be passed to this function as an array of two words: 'Smith' and 'John', with the separator being discarded.
For a match to succeed, all words in the aFindWords array must match words in the array generated from the contact item by
the aWordParserCallback function. To match, the word generated from the contact item must begin with the search word, i.e.
a search for "Sm" would find any word beginning in "Sm". If a word is specified twice in the aFindWords array, then it must
exist in two separate places in the contact item.
The function only searches the fields contained in the currently set text definition.
The caller takes ownership of the returned object.
Parameters
const MDesC16Array &aFindWords |
An array of words to find.
|
const TCallBack &aWordParserCallback |
A function supplied by the caller to break the text in the contact down into a list of words.
|
|
Return value
IMPORT_C CContactIdArray *FindInTextDefLC(const MDesC16Array &aFindWords, CContactTextDef *aTextDef, const TCallBack &aWordParserCallback);
Description
Enables the user to search the database for a string containing text that is stored in one or more fields.
The string is specified as an array of words.
For example, a user might want to search for the string "John Smith". To the user the string is a single item, but the text
which makes up the string is stored in two separate fields in the database.
The caller of this function needs to provide an array of words to find (aFindWords), and a function to break down the text
in the contact item into a list of words (aWordParserCallback).
The array of words to find would typically not contain punctuation. For example if the user searches for 'Smith, John' this
would be passed to this function as an array of two words: 'Smith' and 'John', with the separator being discarded.
For a match to succeed, all words in the aFindWords array must match words in the array generated from the contact item by
the aWordParserCallback function. To match, the word generated from the contact item must begin with the search word, i.e.
a search for "Sm" would find any word beginning in "Sm". If a word is specified twice in the aFindWords array, then it must
exist in two separate places in the contact item.
The function only searches the fields contained in the text definition aTextDef.
The caller takes ownership of the returned object.
Parameters
const MDesC16Array &aFindWords |
An array of words to find.
|
CContactTextDef *aTextDef |
The text definition.
|
const TCallBack &aWordParserCallback |
A function supplied by the caller to break the text in the contact down into a list of words.
|
|
Return value
IMPORT_C CIdleFinder *FindInTextDefAsyncL(const MDesC16Array &aFindWords, MIdleFindObserver *aObserver, const TCallBack &aWordParserCallback);
Description
Asynchronously searches the database for an array of words.
This function works in the same way as its corresponding variant in FindInTextDefLC()
, except that it operates asynchronously using the MIdleFindObserver
and CIdleFinder
classes. The caller takes ownership of the returned object.
Parameters
const MDesC16Array &aFindWords |
An array of words to find.
|
MIdleFindObserver *aObserver |
Implements the callback function IdleFindCallback(). May be NULL if no observer is needed.
|
const TCallBack &aWordParserCallback |
A function to break the text in the contact down into a list of words.
|
|
Return value
CIdleFinder *
|
A CIdle-derived object which provides information about the progress of the operation, and which can be used to retrieve an
array of contact IDs.
|
|
IMPORT_C CIdleFinder *FindInTextDefAsyncL(const MDesC16Array &aFindWords, const CContactTextDef *aTextDef, MIdleFindObserver
*aObserver, const TCallBack &aWordParserCallback);
Description
Asynchronously searches the database for an array of words.
This function works in the same way as its corresponding variant in FindInTextDefLC()
, except that it operates asynchronously using the MIdleFindObserver
and CIdleFinder
classes. The caller takes ownership of the returned object.
Parameters
const MDesC16Array &aFindWords |
An array of words to find.
|
const CContactTextDef *aTextDef |
The text definition.
|
MIdleFindObserver *aObserver |
Implements the callback function IdleFindCallback(). May be NULL if no observer is needed.
|
const TCallBack &aWordParserCallback |
A function to break the text in the contact down into a list of words.
|
|
Return value
CIdleFinder *
|
A CIdle-derived object which provides information about the progress of the operation, and which can be used to retrieve an
array of contact IDs.
|
|
Interface status: |
deprecated |
|
Capability: |
Illegal |
|
IMPORT_C CContactIdArray *SortArrayL(const CContactIdArray *aIdArray, const CArrayFix< TSortPref > *aSortOrder);
Description
Sorts an array of contact IDs. The sort uses the same logic as SortL()
. The caller takes ownership of the returned object.
Parameters
Return value
Interface status: |
deprecated |
|
Capability: |
Illegal |
|
IMPORT_C CContactIdArray *SortArrayLC(const CContactIdArray *aIdArray, const CArrayFix< TSortPref > *aSortOrder);
Description
Sorts an array of contact IDs. The sort uses the same logic as SortL()
. The returned array is left on the cleanup stack. The caller takes ownership of the returned object.
Parameters
Return value
Interface status: |
deprecated |
|
Capability: |
Illegal |
|
IMPORT_C void SortByTypeL(CArrayFix< TSortPref > *aSortOrder);
Description
Sorts the database using the view type value set by SetDbViewContactType()
. The database takes ownership of the sort order array passed in.
The sort uses the same logic as SortL()
. The two functions have the same effect.
After calling this function, use CContactDatabase::SortedItemsL()
to retrieve the sorted array of contact IDs.
Parameters
Interface status: |
deprecated |
|
Capability: |
Illegal |
|
IMPORT_C void SortL(CArrayFix< TSortPref > *aSortOrder);
Description
Sorts the database. The sort only includes items of the type set by SetDbViewContactType()
. The database takes ownership of the sort order array passed in. Contacts are sorted using the first TSortPref
in the array. Any identical matches are then sorted using the next TSortPref
and so on. When there are no more TSortPrefs to use, any remaining unsorted contacts are left in the original database order.
Note: after calling this function, use CContactDatabase::SortedItemsL()
to retrieve the sorted array of contact IDs.
Parameters
CArrayFix < TSortPref > *aSortOrder |
Sort order array. If the array's count is zero, no sorting takes place.
|
|
Interface status: |
deprecated |
|
IMPORT_C void SortAsyncL(CArrayFix< TSortPref > *aSortOrder, TRequestStatus &aStatus);
Description
aSortOrder is owned by the idle sorter.
Parameters
Interface status: |
deprecated |
|
IMPORT_C void CancelAsyncSort();
Description
Cancel the CCntIdleSorter
object and clean up resources.
Interface status: |
deprecated |
|
IMPORT_C void SortAsyncL(CArrayFix< TSortPref > *aSortOrder, TRequestStatus &aStatus, MContactSortObserver &aObserver);
Description
aSortOrder is owned by the idle sorter.
Parameters
IMPORT_C TPtrC FileUid();
Description
Gets the database's UID. This value is used to identify a particular contact database. The database UID is generated when
the database is first created.
Return value
TPtrC
|
Descriptor containing the database UID.
|
|
Capability: |
WriteUserData |
|
IMPORT_C CContactActiveCompress *CreateCompressorLC();
Description
Creates an active compressor to compress the database with an active object.
An observer set up on the active compressor can be used to provide progress information. The caller takes ownership of the
returned object.
Return value
Capability: |
WriteUserData |
|
IMPORT_C CContactActiveRecover *CreateRecoverLC();
Description
Creates an active recoverer object to recover the database using an active object. The caller takes ownership of the returned
object.
Return value
Capability: |
WriteUserData |
|
IMPORT_C void RecoverL();
Description
Recovers the database from a rollback. It first closes all tables and then reopens them after the recover.
IMPORT_C TBool IsDamaged() const;
Description
Tests whether the database is damaged and needs to be recovered.
Return value
TBool
|
ETrue if the database is damaged and needs recovery, EFalse otherwise.
|
|
IMPORT_C TBool CompressRequired();
Description
Tests whether a compress is recommended. This function provides an easy way of testing whether the database is being used
efficiently.
ETrue is returned if:
-
greater than 64K of disk space is wasted
-
greater than 16K of disk space is wasted AND there is greater than 50% wasted disk space
-
greater than 16K of disk space is wasted AND there is less than 5% free disk space
-
greater than 16K of disk space is wasted AND there is less than 16K free disk space
Return value
TBool
|
ETrue if a compress is recommended, EFalse if not or if an error occurred.
|
|
IMPORT_C void CloseTables();
Description
Closes all database tables. After a rollback and recover all tables need to be closed and re-opened before the database can
be accessed again.
IMPORT_C void OpenTablesL();
Description
Opens all database tables. After a rollback and recover all tables need to be closed and re-opened before the database can
be accessed again.
IMPORT_C CContactIdArray *MatchPhoneNumberL(const TDesC &aNumber, TInt aMatchLengthFromRight);
Description
Returns an array of contact item IDs for all the contact items which may contain the specified telephone number in a telephone,
fax or SMS type field.
The comparison method used is not exact. The number is compared starting from the right side of the number and the method
returns an array of candidate matches. Punctuation (eg. spaces) and other alphabetic characters are ignored when comparing.
Additionally, if the contacts model phone parser (CNTPHONE.DLL) is available, then any DTMF digits are also excluded from
the comparision.
Notes: Due to the way numbers are stored in the database, it is recommended that at least 7 match digits are specified even
when matching a number containing fewer digits. Failure to follow this guideline may (depending on the database contents)
mean that the function will not return the expected Contacts Id set.
Parameters
const TDesC &aNumber |
Phone number string. If the length of phone number string is greater than KCntMaxTextFieldLength then only the first KCntMaxTextFieldLength
characters are used in the match.
|
TInt aMatchLengthFromRight |
Number of digits from the right of the phone number to use Up to 15 digits can be specified, and it is recommended that at
least 7 match digits are specified.
|
|
Return value
Interface status: |
deprecated |
|
Capability: |
Illegal |
|
IMPORT_C const CContactIdArray *SortedItemsL();
Description
Returns a pointer to the array of contact items which have been sorted by either SortByTypeL()
or SortL()
. This pointer is valid until a change is made to the database or until the database's active object is allowed to run. If
the array is required after one of the above two events has occurred, a copy of the array must first be made.
Return value
const CContactIdArray * |
A pointer to the array of sorted items. The caller does not take ownership of this object.
|
|
IMPORT_C TContactItemId TemplateId() const;
Description
Gets the ID of the system template. This can then be read, opened and committed like any other contact item.
Return value
Capability: |
WriteUserData |
|
IMPORT_C CContactItem *CreateOwnCardLC();
Description
Creates a default own card based on the system template and adds it to the database. This is set as the database's current
own card, replacing any existing current own card. The caller takes ownership of the returned object.
Return value
CContactItem *
|
Pointer to the new default own card. The pointer is left on the cleanup stack.
|
|
Capability: |
WriteUserData |
|
IMPORT_C CContactItem *CreateOwnCardL();
Description
Creates a default own card based on the system template and adds it to the database. This is set as the database's current
own card, replacing any existing current own card. The caller takes ownership of the returned object.
Return value
IMPORT_C TContactItemId OwnCardId() const;
Description
Returns the ID of the database's current own card.
Having obtained this ID, the client may then open the own card in the same way as an ordinary contact card (using ReadContactL()
or OpenContactL()
).
Return value
TContactItemId
|
The ID of the database's current own card. KNullContactId if the own card has been deleted or has not yet been set.
|
|
Capability: |
WriteUserData |
|
IMPORT_C void SetOwnCardL(const CContactItem &aContact);
Description
Sets an existing contact item to be the database's current own card.
Parameters
const CContactItem &aContact |
The contact item to set as the database's current own card. It must already exist in the database. It cannot be a group or
a template.
|
|
Leave codes
KErrNotFound |
aContact does not exist in the database.
|
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
|
IMPORT_C TContactItemId PrefTemplateId() const;
Description
Returns the ID of the database's preferred template, as set by SetPrefTemplateL()
. KNullContactId if not set. The preferred template is for clients who may have multiple templates but want to identify one
as preferred.
Return value
Capability: |
WriteUserData |
|
IMPORT_C void SetPrefTemplateL(const CContactItem &aContact);
Description
Sets the database's preferred template.
The preferred template's ID persists when the database is opened and closed. If the preferred template is subsequently deleted,
the preferred template ID is set to KNullContactId.
Parameters
const CContactItem &aContact |
The contact card template to set as the database's preferred template.
|
|
Leave codes
KErrNotSupported |
The item is not a template (of type KUidContactCardTemplate).
|
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
|
Capability: |
WriteUserData |
|
IMPORT_C void SetCurrentItem(const TContactItemId aContactId);
Description
Sets the ID of the current item and persists it in the database. The current item is provided for use by clients who want
to identify one contact item in the database as the currently selected item.
Parameters
IMPORT_C TContactItemId GetCurrentItem() const;
Description
Gets the ID of the current item, as set by SetCurrentItem()
. The current item ID is initialised to KNullContactId when the database is opened.
Return value
Interface status: |
deprecated |
|
IMPORT_C void SetDateFormatTextL(const TDesC &aFormat);
Description
This function is not currently supported.
Parameters
const TDesC &aFormat |
This parameter should be ignored.
|
|
IMPORT_C void FilterDatabaseL(CCntFilter &aFilter);
Description
Filters the database. On return, aFilter contains an array of filtered contact item IDs.
Parameters
CCntFilter &aFilter |
The filter to use. On return, contains a filtered array of contact item IDs.
|
|
IMPORT_C CContactIdArray *ContactsChangedSinceL(const TTime &aTime);
Description
Gets an array of contacts modified since the specified date/time. The array includes those contacts that have changed since
the beginning of the specified micro-second. The caller takes ownership of the returned object.
Parameters
const TTime &aTime |
The date/time of interest.
|
|
Return value
CContactIdArray *
|
Pointer to the array of contacts modified since the specified time.
|
|
Interface status: |
deprecated |
|
IMPORT_C TContactSyncId SetLastSyncDateL(const TTime &aSyncDate);
Description
Sets the date/time the database was last synchronised.
This overload sets the last synchronised date/time where the sync ID is not known, and returns the sync ID that was created
(a sync ID identifies a machine with which the database has been synchronised).
Parameters
const TTime &aSyncDate |
The database's new last synchronised date/time.
|
|
Return value
Interface status: |
deprecated |
|
IMPORT_C void SetLastSyncDateL(TContactSyncId aSyncId, const TTime &aSyncDate);
Description
Sets the date/time the database was last synchronised.
This overload is for a known sync ID and updates the database's last synchronised date/time for that ID.
Parameters
TContactSyncId aSyncId |
This argument should be ignored by developers.
|
const TTime &aSyncDate |
The database's new last synchronised date/time.
|
|
Leave codes
KErrNotFound |
The specified sync ID is not found.
|
|
Interface status: |
deprecated |
|
IMPORT_C void GetLastSyncDateL(TContactSyncId aSyncId, TTime &aSyncDate);
Description
Gets the date/time the database was last synchronised with a particular sync ID, as set by SetLastSyncDateL()
.
Parameters
TContactSyncId aSyncId |
This argument should be ignored by developers.
|
TTime &aSyncDate |
On return contains the date/time the database was last synchronised with the sync ID specified.
|
|
Leave codes
KErrNotFound |
The ID cannot be found in the database.
|
|
IMPORT_C TInt FileSize() const;
Description
Gets the size of the database file in bytes.
Return value
TInt
|
The size of the contact database.
|
|
IMPORT_C TInt WastedSpaceInBytes() const;
Description
Gets the amount of wasted space in the database in bytes. This is the database's size minus the amount of data in it.
Return value
TInt
|
The wasted space in the contacts database.
|
|
IMPORT_C TUint ConnectionId() const;
Description
Gets the ID of the connection to the Contacts server.
This can be compared with the connection IDs of incoming messages to identify which connection generated the message.
Return value
TUint
|
The ID of the connection to the Contacts server.
|
|
IMPORT_C const CContentType &TemplateContentType(const CContactItemField &aField) const;
Description
Gets the content type of the template field which a specified field maps onto. If the field does not map onto a field in a
template, then its own content type is returned.
Note: this function can leave.
Parameters
Return value
IMPORT_C TVersion Version() const;
Description
Gets the contact model's version number.
Return value
TVersion
|
The version number of the contacts model.
|
|
IMPORT_C TInt64 MachineId() const;
Description
Returns a number unique to the contacts database. This value may be passed to CContactItem::UidStringL()
.
Return value
TInt64
|
The database's unique ID.
|
|
IMPORT_C TContactItemId ICCTemplateIdL();
Description
Returns the ID of the template that should be used with CContactICCEntry
items.
Return value
IMPORT_C TContactItemId ICCTemplateIdL(TUid aPhonebookUid);
Description
Returns the ID of the template that should be used with CContactICCEntry
items belonging to the phonebook with TUid
aPhonebookUid.
Parameters
TUid aPhonebookUid |
The phonebook ID.
|
|
Return value
IMPORT_C TContactItemId PhonebookGroupIdL();
Description
Returns the ID of the contacts model group which represents the ADN phonebook.
Return value
virtual inline void HandleDatabaseEventL(RDbNotifier::TEvent);
Description
Parameters
Interface status: |
deprecated |
|
Capability: |
Illegal |
|
IMPORT_C TInt GetCurrentDatabase(TDes &aDatabase) const;
Description
Where there are multiple contact databases on a device, this function can be used to enquire which database is the current
one. The current database functions are provided as part of current item functionality. In order to pass a current item from
one contacts model client to another, the receiving client needs to be using the same database.
The current database is a path and filename, set using SetCurrentDatabase()
which is persisted by the contacts server.
Parameters
TDes &aDatabase |
The path and filename of the current database. KNullDesC if no current database has been set.
|
|
Return value
TInt
|
KErrNone if the function completed successfully, otherwise one of the standard error codes.
|
|
Interface status: |
deprecated |
|
Capability: |
WriteUserData |
|
IMPORT_C TInt SetCurrentDatabase(const TDesC &aDatabase) const;
Description
Where there are multiple contact databases on a device, this function can be used to set a database as the current one.
Note: this function simply updates a file name which is stored by the contacts server and its use is optional. It is provided
as part of current item functionality. In order to pass a current item from one contacts model client to another, the receiving
client needs to be using the same database.
Parameters
const TDesC &aDatabase |
The path and filename of the current database.
|
|
Return value
TInt
|
KErrNone if the function completed successfully, otherwise one of the standard error codes.
|
|
Interface status: |
deprecated |
|
IMPORT_C void StoreSortOrderL();
Description
This function is not currently supported.
Interface status: |
deprecated |
|
IMPORT_C void RestoreSortOrderL();
Description
This function is not currently supported.
Interface status: |
deprecated |
|
Capability: |
Illegal |
|
IMPORT_C const CArrayFix< TSortPref > *SortOrder() const;
Description
Gets the array of sort preferences.
Return value
const CArrayFix < TSortPref > * |
A pointer to an array of sort preferences of the contact database.
|
|
Capability: |
WriteUserData |
|
IMPORT_C TContactItemId doAddNewContactL(CContactItem &aContact, TBool aIsTemplate, TBool aIsInTransaction);
Description
Adds a new contact item to the database and returns its ID.
Parameters
CContactItem &aContact |
The contact item to add to the database.
|
TBool aIsTemplate |
This argument should be ignored by developers.
|
TBool aIsInTransaction |
This argument should be ignored by developers.
|
|
Return value
Leave codes
KErrDiskFull |
The disk does not have enough free space to perform the operation.
|
|
Interface status: |
deprecated |
|
Capability: |
Illegal |
|
IMPORT_C void SetSortedItemsList(CContactIdArray *aSortedItems, CArrayFix< TSortPref > *aSortOrder);
Description
This method allows clients of contacts model to set the sorted item list and sort order from a default sort order server as
proposed for Crystal 6.0
Parameters
virtual void HandleDiskSpaceEvent(TInt aDrive);
Description
Default behaviour for handling a low disk event - This function is unimplemented.
Parameters
Interface status: |
deprecated |
|
class TSortPref;
Description
Specifies the field type and order preferences used for sorting items in the contacts database.
The contents of the first field in a contact item matching the field type is used as the data to sort on. The order can either
be ascending or descending.
Members
Defined in CContactDatabase::TSortPref
:
EAsc
Ascending sort order
EDesc
Descending sort order
ExternalizeL()
Store this TSortPref object in the given stream
InternalizeL()
Initialise this TSortPref object from the given stream
TOrder
The sort order
TSortPref()
Constructs a TSortPref object
TSortPref()
Constructs the TSortPref object with a field type and an order
iFieldType
The first field matching this field type is used for the text to sort on
iOrder
Specifies whether the sort should be ascending or descending
See also:
Construction and destruction
TSortPref()
Interface status: |
deprecated |
|
inline TSortPref();
Description
Constructs a TSortPref
object. The order is initialised to EAsc and the field type to KNullUid.
TSortPref()
Interface status: |
deprecated |
|
inline TSortPref(TFieldType aFieldType, TOrder aOrder=EAsc);
Description
Constructs the TSortPref
object with a field type and an order.
Parameters
TFieldType aFieldType |
Specifies the field type to sort on.
|
TOrder aOrder |
Specifies the sort order.
|
|
Member functions
ExternalizeL()
Interface status: |
deprecated |
Inherited from: CContactDatabase::TSortPref |
IMPORT_C void ExternalizeL(RWriteStream &aStream) const;
Description
Store this TSortPref
object in the given stream.
Parameters
InternalizeL()
Interface status: |
deprecated |
Inherited from: CContactDatabase::TSortPref |
IMPORT_C void InternalizeL(RReadStream &aStream);
Description
Initialise this TSortPref
object from the given stream.
Parameters
Member enumerations
Enum TOrder
Interface status: |
deprecated |
Inherited from: CContactDatabase::TSortPref |
TOrder
Description
The sort order.
EAsc |
Ascending sort order.
|
EDesc |
Descending sort order.
|
|
Member data
iOrder
Interface status: |
deprecated |
Inherited from: CContactDatabase::TSortPref |
TOrder iOrder;
Description
Specifies whether the sort should be ascending or descending.
iFieldType
Interface status: |
deprecated |
Inherited from: CContactDatabase::TSortPref |
TFieldType iFieldType;
Description
The first field matching this field type is used for the text to sort on.
Interface status: |
deprecated |
This enum is deprecated. It has been replaced by the TOptions enum in the plugin convertor class CContactVCardConverter, so
that each plugin converter can define its own options.
|
TOptions
Description
Import and export format flags. Contacts can be imported into or exported from the contact database as vCards.
The following options are available during import and export.
TThreadAccess
Description
Specifies whether the database can be accessed from single or multiple threads.
ESingleThread |
Allows access to the contacts database from a single thread only.
|
EMultiThread |
Allows for a multi-threaded program to access the contact database from multiple threads but note that the contacts model
provides no synchronisation support for such use.
|
|
TContactViewFilter
Description
Contact view filter flags.
These flags define the bits that can be set in filtered views (CContactFilteredView
) and in the filter passed to CContactDatabase::ContactMatchesHintFieldL()
for comparing against contact view items (CViewContact
).
If the item's bit field and the view's filter have the same settings for the CContactDatabase::EHome
and CContactDatabase::EWork
flags and any of the other flags are set in both, a match occurs and the item is included in the view.
Filters only apply to non-hidden contact fields with content.
EUnfiltered |
The view is unfiltered; it includes all contact items.
|
EMailable |
The filter includes items that have an email address.
|
ESmsable |
The filter includes items that have a mobile telephone number.
|
ELandLine |
The filter includes items that have a landline telephone number.
|
EFaxable |
The filter includes items that have a fax number.
|
EPhonable |
The filter includes items that are phonable. (All items with any of the above three flags set also have this flag set).
|
EWork |
The filter excludes items without a work telephone number or email address.
|
EHome |
The filter excludes items without a home telephone number or email address.
|
ERingTone |
The filter includes items that have a non-empty ring tone field (a ring tone that is associated with the item).
|
EVoiceDial |
The filter includes items that have a non-empty voice dial field (a voice recording associated with a telephone number field
in the item).
|
EIMAddress |
The filter includes items that have any non empty instant messaging address field.
|
EWirelessVillage |
The filter includes items that have a non empty Wireless Village ID field. An item with this flag set will also have the EIMAddress
flag set.
|
ECustomFilter1 |
Reserved filters for future use.
|
ECustomFilter2 |
Reserved filters for future use.
|
ECustomFilter3 |
Reserved filters for future use.
|
ECustomFilter4 |
Reserved filters for future use.
|
|
TDbConnState
Description
State of database connection
TDirection
Description
Currently unused
Typedef TTextFieldMinimal
typedef TBuf<KTextFieldMinimalLength> CContactDatabase::TTextFieldMinimal;
Description
A text buffer of KTextFieldMinimalLength used during sorting and searching of contacts