Developper documentation for Scan¶
Context¶
This document is meant to act as reference material for developers working on Theano’s loop mechanism. This mechanism is called Scan and its internals are highly complex, hence the need for a centralized repository of knowledge regarding its inner workings.
The theano.scan()
function is the public-facing interface for looping in
Theano. Under the hood, this function will perform some processing on its
inputs and instantiate the Scan
op class which implements the looping
mechanism. It achieves this by compiling its own Theano function representing
the computation to be done at every iteration of the loop and calling it as
many times as necessary.
The correspondence between the parameters and behaviors of the function and the
op is not always simple since the former is meant for usability and the second
for performance. Since this document is intended to be used by developers
working inside Scan itself, it will mostly discuss things from the point of view
of the Scan
op class. Nonetheless, it will attempt to link those elements to
their corresponding concepts in the scan function as often as is reasonably
practical.
Pre-requisites¶
The following sections assumes the reader is familiar with the following :
- Theano’s graph structure (Apply nodes, Variable nodes and Ops)
- The interface and usage of Theano’s scan() function
Additionally, the Optimizations section below assumes knowledge of:
- Theano’s graph optimizations
Relevant code files¶
The implementation of Scan is spread over several files in
theano/scan_module
. The different files, and sections of the code they
deal with, are :
scan.py
implements thescan
function. Thescan
function arranges the arguments of scan correctly, constructs the scan op and afterwards calls the constructed scan op on the arguments. This function takes care of figuring out missing inputs and shared variables.scan_op.py
implements theScan
op class. TheScan
respects theOp
interface, and contains most of the logic of the scan operator.scan_utils.py
contains several helpful functions used throughout out the other files that are specific of the scan operator.scan_views.py
contains different views of the scan op that have simpler and easier signatures to be used in specific cases.scan_opt.py
contains the list of all Theano graph optimizations for the scan operator.
Notation¶
Scan being a sizeable and complex module, it has its own naming convention for functions and variables which this section will attempt to introduce.
A scan op contains a Theano function representing the computation
that is done in a single iteration of the loop represented by the scan op (in
other words, the computation given by the function provided as value to
theano.scan
‘s fn
argument ). Whenever we discuss a scan op, the outer
function refers to the Theano function that contains the scan op whereas the
inner function refers to the Theano function that is contained inside the
scan op.
In the same spirit, the inputs and outputs of the Apply node wrapping the scan op (or scan node for short) are referred to as outer inputs and outer outputs, respectively, because these inputs and outputs are variables in the outer function graph. The inputs and outputs of scan’s inner function are designated inner inputs and inner outputs, respectively.
Scan variables¶
The following are the different types of variables that Scan has the capacity to handle, along with their various caracteristics.
Sequence : A sequence is a Theano variable which Scan will iterate over and
give sub-elements to its inner function as input. A sequence has no associated
output. For a sequence variable X
, at timestep t
, the inner function will
receive as input the sequence element X[t]
. These variables are used through
the argument sequences
of the theano.scan()
function.
Non-sequences : A non-sequence is a Theano variable which Scan will provide
as-is to its inner function. Like a sequence, a non-sequence has no
associated output. For a non-sequence variable X
, at timestep t
, the inner
function will receive as input the variable X
. These variables are used through
the argument non_sequences
of the theano.scan()
function.
Nitsot (no input tap, single output tap) : A nitsot is an output variable of the inner function that is not fed back as an input to the next iteration of the inner function. Nitsots are typically encountered in situations where Scan is used to perform a ‘map’ operation (every element in a tensor is independently altered using a given operation to produce a new tensor) such as squaring every number in a vector.
Sitsot (single input tap, single output tap) : A sitsot is an output variable of the inner function that is fed back as an input to the next iteration of the inner function. A typical setting where a sitsot might be encountered is the case where Scan is used to compute the cumulative sum over the elements of a vector and a sitsot output is employed to act as an accumulator.
Mitsot (multiple input taps, single output tap) : A mitsot is an output variable of the inner function that is fed back as an input to future iterations of the inner function (either multiple future iterations or a single one that isn’t the immediate next one). For example, a mitsot might be used in the case where Scan is used to compute the Fibonacci sequence, one term of the sequence at every timestep, since every computed term needs to be reused to compute the two next terms of the sequence.
Mitmot (multiple input taps, multiple output taps) : These outputs exist but they cannot be directly created by the user. They can appear in a theano graph as a result of taking the gradient of the output of a Scan with respect to its inputs: This will result in the creation of a new scan node used to compute the gradients of the first scan node. If the original Scan had sitsots or mitsots variables, the new Scan will use mitmots to compute the gradients through time for these variables.
To synthesize :
Type of scan variables | Corresponding outer input | Corresponding inner input at timestep t (indexed from 0) | Corresponding inner output at timestep t (indexed from 0) | Corresponding outer output t | Corresponding argument of the theano.scan() function |
---|---|---|---|---|---|
Sequence | Sequence of elements X | Individual sequence element X[t] | No corresponding inner output | No corresponding outer output | sequences |
Non-Sequence | Any variable X | Variable identical to X | No corresponding inner output | No corresponding outer output | non_sequences |
Non-recurring output (nitsot) | No corresponding outer input | No corresponding inner input | Output value at timestep t | Concatenation of the values of the output at all timestep | outputs_info |
Singly-recurrent output (sitsot) | Initial value (value at timestep -1) | Output value at previous timestep (t-1) | Output value at timestep t | Concatenation of the values of the output at all timestep | outputs_info |
Multiply-recurrent output (mitsot) | Initial values for the required timesteps where t<0 | Output value at previous required timesteps | Output value at timestep t | Concatenation of the values of the output at all timestep | outputs_info |
Multiply-recurrent multiple outputs (mitmot) | Initial values for the required timesteps where t<0 | Output value at previous required timesteps | Output values for current and multiple future timesteps | Concatenation of the values of the output at all timestep | No corresponding argument |
Optimizations¶
remove_constants_and_unused_inputs_scan¶
This optimization serves two purposes, The first is to remove a scan op’s unused inputs. The second is to take a scan op’s constant inputs and remove them, instead injecting the constants directly into the graph or the scan op’s inner function. This will allow constant folding to happen inside the inner function.
PushOutNonSeqScan¶
This optimizations pushes, out of Scan’s inner function and into the outer function, computation that depends only on non-sequence inputs. Such computation ends up being done every iteration on the same values so moving it to the outer function to be executed only once, before the scan op, reduces the amount of computation that needs to be performed.
PushOutSeqScan¶
This optimization resembles PushOutNonSeqScan but it tries to push, out of the inner function, the computation that only relies on sequence and non-sequence inputs. The idea behing this optimization is that, when it is possible to do so, it is generally more computationally efficient to perform a single operation on a large tensor rather then perform that same operation many times on many smaller tensors. In many cases, this optimization can increase memory usage but, in some specific cases, it can also decrease it.
PushOutScanOutput¶
This optimizations attempts to push out some of the computation at the end of the inner function to the outer function, to be executed after the scan node. Like PushOutSeqScan, this optimization aims to replace many operations on small tensors by few operations on large tensors. It can also lead to increased memory usage.
PushOutDot1¶
This is another optimization that attempts to detect certain patterns of computation in a scan op’s inner function and move this computation to the outer graph.
ScanInplaceOptimizer¶
This optimization attempts to make Scan compute its recurrent outputs inplace on the input tensors that contain their initial states. This optimization can improve runtime performance as well as reduce memory usage.
ScanSaveMem¶
This optimizations attempts to determine if a scan node, during its execution, for any of its outputs, can get away with allocating a memory buffer that is large enough to contain some of the computed timesteps of that output but not all of them.
By default, during the execution of a scan node, memory buffers will be allocated to store the values computed for every output at every iteration. However, in some cases, there are outputs for which there is only really a need to store the most recent N values, not all of them.
For instance, if a scan node has a sitsot output (last computed value is fed back as an input at the next iteration) and only the last timestep of that output is ever used in the outer function, the ScanSaveMem optimization could determine that there is no need to store all computed timesteps for that sitsot output. Only the most recently computed timestep ever needs to be kept in memory.
ScanMerge¶
This optimization attempts to fuse distinct scan ops into a single scan op that performs all the computation. The main advantage of merging scan ops together comes from the possibility of both original ops having some computation in common. In such a setting, this computation ends up being done twice. The fused scan op, however, would only need to do it once and could therefore be more computationally efficient. Also, since every scan node involves a certain overhead, at runtime, reducing the number of scan nodes in the graph can improve performance.
scan_merge_inouts¶
This optimization attempts to merge a scan op’s identical outer inputs as well as merge its identical outer outputs (outputs that perform the same computation on the same inputs). This can reduce the amount of computation as well as result in a simpler graph for both the inner function and the outer function.
Helper classes and functions¶
Because of the complexity involved in dealing with Scan, a large number of
helper classes and functions have been developped over time to implement
operations commonly needed when dealing with the scan op. The scan op
itself defines a large number of them and others can be found in the file
scan_utils.py
. This sections aims to point out the most useful ones sorted
by usage.
Accessing/manipulating Scan’s inputs and outputs by type¶
Declared in scan_utils.py
, the class scan_args
handles the parsing
of the inputs and outputs (both inner and outer) to a format that is easier to
analyse and manipulate. Without this class, analysing Scan’s inputs and
outputs often required convoluted logic which make for code that is hard to
read and to maintain. Because of this, you should favor using scan_args
when
it is practical and appropriate to do so.
The scan op also defines a few helper functions for this purpose, such as
inner_nitsot_outs()
or mitmot_out_taps()
, but they are often poorly
documented and easy to misuse. These should be used with great care.