The default behaviour of ClamAV will fit our needs. For more ClamAV configuration options, check the configuration files in /etc/clamav.

Add the clamav user to the amavis group in order for Amavisd-new to have the appropriate access to scan files:

sudo adduser clamav amavis
sudo adduser amavis clamav

Spamassassin automatically detects optional components and will use them if they are present. This means that there is no need to configure pyzor and razor.

Edit /etc/default/spamassassin to activate the Spamassassin daemon. Change ENABLED=0 to:

ENABLED=1

Now start the daemon:

sudo /etc/init.d/spamassassin start

First activate spam and antivirus detection in Amavisd-new by editing /etc/amavis/conf.d/15-content_filter_mode:

use strict;

# You can modify this file to re-enable SPAM checking through spamassassin
# and to re-enable antivirus checking.

#
# Default antivirus checking mode
# Uncomment the two lines below to enable it
#

@bypass_virus_checks_maps = (
   \%bypass_virus_checks, \@bypass_virus_checks_acl, \$bypass_virus_checks_re);


#
# Default SPAM checking mode
# Uncomment the two lines below to enable it
#

@bypass_spam_checks_maps = (
   \%bypass_spam_checks, \@bypass_spam_checks_acl, \$bypass_spam_checks_re);

1;  # insure a defined return

Bouncing spam can be a bad idea as the return address is often faked. Consider editing /etc/amavis/conf.d/20-debian_defaults to set $final_spam_destiny to D_DISCARD rather than D_BOUNCE, as follows:

$final_spam_destiny       = D_DISCARD;

Additionally, you may want to adjust the following options to flag more messages as spam:

$sa_tag_level_deflt = -999; # add spam info headers if at, or above that level
$sa_tag2_level_deflt = 6.0; # add 'spam detected' headers at that level
$sa_kill_level_deflt = 21.0; # triggers spam evasive actions
$sa_dsn_cutoff_level = 4; # spam level beyond which a DSN is not sent

If the server's hostname is different from the domain's MX record you may need to manually set the $myhostname option. Also, if the server receives mail for multiple domains the @local_domains_acl option will need to be customized. Edit the /etc/amavis/conf.d/50-user file:

$myhostname = 'mail.example.com';
@local_domains_acl = ( "example.com", "example.org" );

If you want to cover multiple domains you can use the following in the/etc/amavis/conf.d/50-user

@local_domains_acl = qw(.);

After configuration Amavisd-new needs to be restarted:

sudo /etc/init.d/amavis restart

For Postfix integration, enter the following from a terminal prompt:

sudo postconf -e 'content_filter = smtp-amavis:[127.0.0.1]:10024'

Next edit /etc/postfix/master.cf and add the following to the end of the file:

smtp-amavis     unix    -       -       -       -       2       smtp
        -o smtp_data_done_timeout=1200
        -o smtp_send_xforward_command=yes
        -o disable_dns_lookups=yes
        -o max_use=20

127.0.0.1:10025 inet    n       -       -       -       -       smtpd
        -o content_filter=
        -o local_recipient_maps=
        -o relay_recipient_maps=
        -o smtpd_restriction_classes=
        -o smtpd_delay_reject=no
        -o smtpd_client_restrictions=permit_mynetworks,reject
        -o smtpd_helo_restrictions=
        -o smtpd_sender_restrictions=
        -o smtpd_recipient_restrictions=permit_mynetworks,reject
        -o smtpd_data_restrictions=reject_unauth_pipelining
        -o smtpd_end_of_data_restrictions=
        -o mynetworks=127.0.0.0/8
        -o smtpd_error_sleep_time=0
        -o smtpd_soft_error_limit=1001
        -o smtpd_hard_error_limit=1000
        -o smtpd_client_connection_count_limit=0
        -o smtpd_client_connection_rate_limit=0
        -o receive_override_options=no_header_body_checks,no_unknown_recipient_checks

Also add the following two lines immediately below the "pickup" transport service:

         -o content_filter=
         -o receive_override_options=no_header_body_checks

This will prevent messages that are generated to report on spam from being classified as spam.

Now restart Postfix:

sudo /etc/init.d/postfix restart

Content filtering with spam and virus detection is now enabled.

When integrating Amavisd-new with Spamassassin, if you choose to disable the bayes filtering by editing /etc/spamassassin/local.cf and use cron to update the nightly rules, the result can cause a situation where a large amount of error messages are sent to the amavis user via the amavisd-new cron job.

There are several ways to handle this situation: