Notepad Exercise 3

In this exercise, you will use life-cycle event callbacks to store and retrieve application state data. This exercise demonstrates:

• Life-cycle events and how your application can use them
• Techniques for maintaining application state

Step 1

Import Notepadv3 into Eclipse. If you see an error about AndroidManifest.xml, or some problems related to an Android zip file, right click on the project and select Android Tools > Fix Project Properties from the popup menu. The starting point for this exercise is exactly where we left off at the end of the Notepadv2.

The current application has some problems — hitting the back button when editing causes a crash, and anything else that happens during editing will cause the edits to be lost.

To fix this, we will move most of the functionality for creating and editing the note into the NoteEdit class, and introduce a full life cycle for editing notes.

1. Remove the code in NoteEdit that parses the title and body from the extras Bundle.

   Instead, we are going to use the DBHelper class to access the notes from the database directly. All we need passed into the NoteEdit Activity is a mRowId (but only if we are editing, if creating we pass nothing). Remove these lines:

   String title = extras.getString(NotesDbAdapter.KEY_TITLE);
   String body = extras.getString(NotesDbAdapter.KEY_BODY);

2. We will also get rid of the properties that were being passed in the extras Bundle, which we were using to set the title and body text edit values in the UI. So delete:

   if (title != null) {
       mTitleText.setText(title);
   }
   if (body != null) {
       mBodyText.setText(body);
   }

Step 2

Create a class field for a NotesDbAdapter at the top of the NoteEdit class:

    private NotesDbAdapter mDbHelper;

Also add an instance of NotesDbAdapter in the onCreate() method (right below the super.onCreate() call):

    mDbHelper = new NotesDbAdapter(this);

    mDbHelper.open();

Step 3

In NoteEdit, we need to check the savedInstanceState for the mRowId, in case the note editing contains a saved state in the Bundle, which we should recover (this would happen if our Activity lost focus and then restarted).

1. Replace the code that currently initializes the mRowId:
   

           mRowId = null;
   
           Bundle extras = getIntent().getExtras();
           if (extras != null) {
               mRowId = extras.getLong(NotesDbAdapter.KEY_ROWID);
           }
           

   with this:

           mRowId = savedInstanceState != null ? savedInstanceState.getLong(NotesDbAdapter.KEY_ROWID) 
                                               : null;
           if (mRowId == null) {
               Bundle extras = getIntent().getExtras();            
               mRowId = extras != null ? extras.getLong(NotesDbAdapter.KEY_ROWID) 
                                       : null;
           }
           

2. Note the null check for savedInstanceState, and we still need to load up mRowId from the extras Bundle if it is not provided by the savedInstanceState. This is a ternary operator shorthand to safely either use the value or null if it is not present.

Step 4

Next, we need to populate the fields based on the mRowId if we have it:

populateFields();

This goes before the confirmButton.setOnClickListener() line. We'll define this method in a moment.

Step 5

Get rid of the Bundle creation and Bundle value settings from the onClick() handler method. The Activity no longer needs to return any extra information to the caller. And because we no longer have an Intent to return, we'll use the shorter version of setResult():

public void onClick(View view) {
    setResult(RESULT_OK);
    finish();
}

We will take care of storing the updates or new notes in the database ourselves, using the life-cycle methods.

The whole onCreate() method should now look like this:

super.onCreate(savedInstanceState);
 
mDbHelper = new NotesDbAdapter(this);
mDbHelper.open();
 
setContentView(R.layout.note_edit);
 
mTitleText = (EditText) findViewById(R.id.title);
mBodyText = (EditText) findViewById(R.id.body);
 
Button confirmButton = (Button) findViewById(R.id.confirm);
 
mRowId = savedInstanceState != null ? savedInstanceState.getLong(NotesDbAdapter.KEY_ROWID) 
                                    : null;
if (mRowId == null) {
    Bundle extras = getIntent().getExtras();
    mRowId = extras != null ? extras.getLong(NotesDbAdapter.KEY_ROWID) 
                            : null;
}
 
populateFields();
 
confirmButton.setOnClickListener(new View.OnClickListener() {

    public void onClick(View view) {
        setResult(RESULT_OK);
        finish();
    }
     
});

Step 6

Define the populateFields() method.

private void populateFields() {
    if (mRowId != null) {
        Cursor note = mDbHelper.fetchNote(mRowId);
        startManagingCursor(note);
        mTitleText.setText(note.getString(
	            note.getColumnIndexOrThrow(NotesDbAdapter.KEY_TITLE)));
        mBodyText.setText(note.getString(
                note.getColumnIndexOrThrow(NotesDbAdapter.KEY_BODY)));
    }
}

This method uses the NotesDbAdapter.fetchNote() method to find the right note to edit, then it calls startManagingCursor() from the Activity class, which is an Android convenience method provided to take care of the Cursor life-cycle. This will release and re-create resources as dictated by the Activity life-cycle, so we don't need to worry about doing that ourselves. After that, we just look up the title and body values from the Cursor and populate the View elements with them.

Step 7

Still in the NoteEdit class, we now override the methods onSaveInstanceState(), onPause() and onResume(). These are our life-cycle methods (along with onCreate() which we already have).

onSaveInstanceState() is called by Android if the Activity is being stopped and may be killed before it is resumed! This means it should store any state necessary to re-initialize to the same condition when the Activity is restarted. It is the counterpart to the onCreate() method, and in fact the savedInstanceState Bundle passed in to onCreate() is the same Bundle that you construct as outState in the onSaveInstanceState() method.

onPause() and onResume() are also complimentary methods. onPause() is always called when the Activity ends, even if we instigated that (with a finish() call for example). We will use this to save the current note back to the database. Good practice is to release any resources that can be released during an onPause() as well, to take up less resources when in the passive state. onResume() will call our populateFields() method to read the note out of the database again and populate the fields.

So, add some space after the populateFields() method and add the following life-cycle methods:

1. onSaveInstanceState():

       @Override
       protected void onSaveInstanceState(Bundle outState) {
           super.onSaveInstanceState(outState);
           outState.putLong(NotesDbAdapter.KEY_ROWID, mRowId);
       }

2. onPause():

       @Override
       protected void onPause() {
           super.onPause();
           saveState();
       }

   We'll define saveState() next.

3. onResume():

       @Override
       protected void onResume() {
           super.onResume();
           populateFields();
       }

Step 8

Define the saveState() method to put the data out to the database.

     private void saveState() {
        String title = mTitleText.getText().toString();
        String body = mBodyText.getText().toString();

        if (mRowId == null) {
            long id = mDbHelper.createNote(title, body);
            if (id > 0) {
                mRowId = id;
            }
        } else {
            mDbHelper.updateNote(mRowId, title, body);
        }
    }

Note that we capture the return value from createNote() and if a valid row ID is returned, we store it in the mRowId field so that we can update the note in future rather than create a new one (which otherwise might happen if the life-cycle events are triggered).

Step 9

Now pull out the previous handling code from the onActivityResult() method in the Notepadv3 class.

All of the note retrieval and updating now happens within the NoteEdit life cycle, so all the onActivityResult() method needs to do is update its view of the data, no other work is necessary. The resulting method should look like this:

@Override
protected void onActivityResult(int requestCode, int resultCode, 
                                Intent intent) {
    super.onActivityResult(requestCode, resultCode, intent);
    fillData();
}

Because the other class now does the work, all this has to do is refresh the data.

Step 10

Also remove the lines which set the title and body from the onListItemClick() method (again they are no longer needed, only the mRowId is):

    Cursor c = mNotesCursor;
    c.moveToPosition(position);

and also remove:

    i.putExtra(NotesDbAdapter.KEY_TITLE, c.getString(
                    c.getColumnIndex(NotesDbAdapter.KEY_TITLE)));
    i.putExtra(NotesDbAdapter.KEY_BODY, c.getString(
                    c.getColumnIndex(NotesDbAdapter.KEY_BODY)));

so that all that should be left in that method is:

    super.onListItemClick(l, v, position, id);
    Intent i = new Intent(this, NoteEdit.class);
    i.putExtra(NotesDbAdapter.KEY_ROWID, id);
    startActivityForResult(i, ACTIVITY_EDIT);

You can also now remove the mNotesCursor field from the class, and set it back to using a local variable in the fillData() method:

    Cursor notesCursor = mDbHelper.fetchAllNotes();

Note that the m in mNotesCursor denotes a member field, so when we make notesCursor a local variable, we drop the m. Remember to rename the other occurrences of mNotesCursor in your fillData() method.

Run it! (use Run As -> Android Application on the project right click menu again)

Solution and Next Steps

You can see the solution to this exercise in Notepadv3Solution from the zip file to compare with your own.

When you are ready, move on to the Tutorial Extra Credit exercise, where you can use the Eclipse debugger to examine the life-cycle events as they happen.