| java.lang.Object | |
| ↳ | java.lang.Character |
The wrapper for the primitive type char. This class also provides a
number of utility methods for working with characters.
Character data is based upon the Unicode Standard, 4.0. The Unicode specification, character tables and other information are available at http://www.unicode.org/.
Unicode characters are referred to as code points. The range of valid
code points is U+0000 to U+10FFFF. The Basic Multilingual Plane (BMP)
is the code point range U+0000 to U+FFFF. Characters above the BMP are
referred to as Supplementary Characters. On the Java platform, UTF-16
encoding and char pairs are used to represent code points in the
supplementary range. A pair of char values that represent a
supplementary character are made up of a high surrogate with a value
range of 0xD800 to 0xDBFF and a low surrogate with a value range of
0xDC00 to 0xDFFF.
On the Java platform a char value represents either a single BMP code
point or a UTF-16 unit that's part of a surrogate pair. The int type
is used to represent all Unicode code points.
| Nested Classes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Character.Subset | |||||||||||
| Character.UnicodeBlock | Represents a block of Unicode characters, as defined by the Unicode 4.0.1 specification. | ||||||||||
| Constants | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| byte | COMBINING_SPACING_MARK | Unicode category constant Mc. | |||||||||
| byte | CONNECTOR_PUNCTUATION | Unicode category constant Pc. | |||||||||
| byte | CONTROL | Unicode category constant Cc. | |||||||||
| byte | CURRENCY_SYMBOL | Unicode category constant Sc. | |||||||||
| byte | DASH_PUNCTUATION | Unicode category constant Pd. | |||||||||
| byte | DECIMAL_DIGIT_NUMBER | Unicode category constant Nd. | |||||||||
| byte | DIRECTIONALITY_ARABIC_NUMBER | Unicode bidirectional constant AN. | |||||||||
| byte | DIRECTIONALITY_BOUNDARY_NEUTRAL | Unicode bidirectional constant BN. | |||||||||
| byte | DIRECTIONALITY_COMMON_NUMBER_SEPARATOR | Unicode bidirectional constant CS. | |||||||||
| byte | DIRECTIONALITY_EUROPEAN_NUMBER | Unicode bidirectional constant EN. | |||||||||
| byte | DIRECTIONALITY_EUROPEAN_NUMBER_SEPARATOR | Unicode bidirectional constant ES. | |||||||||
| byte | DIRECTIONALITY_EUROPEAN_NUMBER_TERMINATOR | Unicode bidirectional constant ET. | |||||||||
| byte | DIRECTIONALITY_LEFT_TO_RIGHT | Unicode bidirectional constant L. | |||||||||
| byte | DIRECTIONALITY_LEFT_TO_RIGHT_EMBEDDING | Unicode bidirectional constant LRE. | |||||||||
| byte | DIRECTIONALITY_LEFT_TO_RIGHT_OVERRIDE | Unicode bidirectional constant LRO. | |||||||||
| byte | DIRECTIONALITY_NONSPACING_MARK | Unicode bidirectional constant NSM. | |||||||||
| byte | DIRECTIONALITY_OTHER_NEUTRALS | Unicode bidirectional constant ON. | |||||||||
| byte | DIRECTIONALITY_PARAGRAPH_SEPARATOR | Unicode bidirectional constant B. | |||||||||
| byte | DIRECTIONALITY_POP_DIRECTIONAL_FORMAT | Unicode bidirectional constant PDF. | |||||||||
| byte | DIRECTIONALITY_RIGHT_TO_LEFT | Unicode bidirectional constant R. | |||||||||
| byte | DIRECTIONALITY_RIGHT_TO_LEFT_ARABIC | Unicode bidirectional constant AL. | |||||||||
| byte | DIRECTIONALITY_RIGHT_TO_LEFT_EMBEDDING | Unicode bidirectional constant RLE. | |||||||||
| byte | DIRECTIONALITY_RIGHT_TO_LEFT_OVERRIDE | Unicode bidirectional constant RLO. | |||||||||
| byte | DIRECTIONALITY_SEGMENT_SEPARATOR | Unicode bidirectional constant S. | |||||||||
| byte | DIRECTIONALITY_UNDEFINED | Unicode bidirectional constant. | |||||||||
| byte | DIRECTIONALITY_WHITESPACE | Unicode bidirectional constant WS. | |||||||||
| byte | ENCLOSING_MARK | Unicode category constant Me. | |||||||||
| byte | END_PUNCTUATION | Unicode category constant Pe. | |||||||||
| byte | FINAL_QUOTE_PUNCTUATION | Unicode category constant Pf. | |||||||||
| byte | FORMAT | Unicode category constant Cf. | |||||||||
| byte | INITIAL_QUOTE_PUNCTUATION | Unicode category constant Pi. | |||||||||
| byte | LETTER_NUMBER | Unicode category constant Nl. | |||||||||
| byte | LINE_SEPARATOR | Unicode category constant Zl. | |||||||||
| byte | LOWERCASE_LETTER | Unicode category constant Ll. | |||||||||
| byte | MATH_SYMBOL | Unicode category constant Sm. | |||||||||
| int | MAX_CODE_POINT | The maximum code point value, U+10FFFF. |
|||||||||
| char | MAX_HIGH_SURROGATE | The maximum value of a high surrogate or leading surrogate unit in UTF-16
encoding, '?'. |
|||||||||
| char | MAX_LOW_SURROGATE | The maximum value of a low surrogate or trailing surrogate unit in UTF-16
encoding, '?'. |
|||||||||
| int | MAX_RADIX | The maximum radix used for conversions between characters and integers. | |||||||||
| char | MAX_SURROGATE | The maximum value of a surrogate unit in UTF-16 encoding, '?'. |
|||||||||
| char | MAX_VALUE | The maximum Character value. |
|||||||||
| int | MIN_CODE_POINT | The minimum code point value, U+0000. |
|||||||||
| char | MIN_HIGH_SURROGATE | The minimum value of a high surrogate or leading surrogate unit in UTF-16
encoding, '?'. |
|||||||||
| char | MIN_LOW_SURROGATE | The minimum value of a low surrogate or trailing surrogate unit in UTF-16
encoding, '?'. |
|||||||||
| int | MIN_RADIX | The minimum radix used for conversions between characters and integers. | |||||||||
| int | MIN_SUPPLEMENTARY_CODE_POINT | The minimum value of a supplementary code point, U+010000. |
|||||||||
| char | MIN_SURROGATE | The minimum value of a surrogate unit in UTF-16 encoding, '?'. |
|||||||||
| char | MIN_VALUE | The minimum Character value. |
|||||||||
| byte | MODIFIER_LETTER | Unicode category constant Lm. | |||||||||
| byte | MODIFIER_SYMBOL | Unicode category constant Sk. | |||||||||
| byte | NON_SPACING_MARK | Unicode category constant Mn. | |||||||||
| byte | OTHER_LETTER | Unicode category constant Lo. | |||||||||
| byte | OTHER_NUMBER | Unicode category constant No. | |||||||||
| byte | OTHER_PUNCTUATION | Unicode category constant Po. | |||||||||
| byte | OTHER_SYMBOL | Unicode category constant So. | |||||||||
| byte | PARAGRAPH_SEPARATOR | Unicode category constant Zp. | |||||||||
| byte | PRIVATE_USE | Unicode category constant Co. | |||||||||
| int | SIZE | The number of bits required to represent a Character value
unsigned form. |
|||||||||
| byte | SPACE_SEPARATOR | Unicode category constant Zs. | |||||||||
| byte | START_PUNCTUATION | Unicode category constant Ps. | |||||||||
| byte | SURROGATE | Unicode category constant Cs. | |||||||||
| byte | TITLECASE_LETTER | Unicode category constant Lt. | |||||||||
| Class<Character> | TYPE | The Class object that represents the primitive type char. |
|||||||||
| byte | UNASSIGNED | Unicode category constant Cn. | |||||||||
| byte | UPPERCASE_LETTER | Unicode category constant Lu. | |||||||||
| Public Constructors | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Constructs a new
Character with the specified primitive char
value. | |||||||||||
| Public Methods | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Calculates the number of
char values required to represent the
specified Unicode code point. | |||||||||||
Gets the primitive value of this character.
| |||||||||||
Returns the code point at
index in the specified array of
character units. | |||||||||||
Returns the code point at
index in the specified sequence of
character units. | |||||||||||
Returns the code point at
index in the specified array of
character units, where index has to be less than limit. | |||||||||||
Returns the code point that precedes
index in the specified
sequence of character units. | |||||||||||
Returns the code point that precedes
index in the specified
array of character units. | |||||||||||
Returns the code point that precedes the
index in the specified
array of character units and is not less than start. | |||||||||||
Counts the number of Unicode code points in the subsequence of the
specified character sequence, as delineated by
beginIndex and
endIndex. | |||||||||||
Counts the number of Unicode code points in the subsequence of the
specified char array, as delineated by
offset and count. | |||||||||||
Compares this object to the specified character object to determine their
relative order.
| |||||||||||
Convenience method to determine the value of the character
codePoint in the supplied radix. | |||||||||||
Convenience method to determine the value of the specified character
c in the supplied radix. | |||||||||||
Compares this object with the specified object and indicates if they are
equal.
| |||||||||||
Returns the character which represents the specified digit in the
specified radix.
| |||||||||||
Gets the Unicode directionality of the specified character.
| |||||||||||
Gets the Unicode directionality of the specified character.
| |||||||||||
Gets the numeric value of the specified Unicode code point.
| |||||||||||
Gets the numeric value of the specified Unicode character.
| |||||||||||
Gets the general Unicode category of the specified code point.
| |||||||||||
Gets the general Unicode category of the specified character.
| |||||||||||
Returns an integer hash code for this object.
| |||||||||||
Indicates whether the specified character is defined in the Unicode
specification.
| |||||||||||
Indicates whether the specified code point is defined in the Unicode
specification.
| |||||||||||
Indicates whether the specified code point is a digit.
| |||||||||||
Indicates whether the specified character is a digit.
| |||||||||||
Indicates whether
ch is a high- (or leading-) surrogate code unit
that is used for representing supplementary characters in UTF-16
encoding. | |||||||||||
Indicates whether the specified character is an ISO control character.
| |||||||||||
Indicates whether the specified code point is an ISO control character.
| |||||||||||
Indicates whether the specified code point is ignorable in a Java or
Unicode identifier.
| |||||||||||
Indicates whether the specified character is ignorable in a Java or
Unicode identifier.
| |||||||||||
Indicates whether the specified code point is a valid part of a Java
identifier other than the first character.
| |||||||||||
Indicates whether the specified character is a valid part of a Java
identifier other than the first character.
| |||||||||||
Indicates whether the specified character is a valid first character for
a Java identifier.
| |||||||||||
Indicates whether the specified code point is a valid first character for
a Java identifier.
| |||||||||||
This method is deprecated.
Use
isJavaIdentifierStart(char)
| |||||||||||
This method is deprecated.
Use
isJavaIdentifierPart(char)
| |||||||||||
Indicates whether the specified code point is a letter.
| |||||||||||
Indicates whether the specified character is a letter.
| |||||||||||
Indicates whether the specified code point is a letter or a digit.
| |||||||||||
Indicates whether the specified character is a letter or a digit.
| |||||||||||
Indicates whether
ch is a low- (or trailing-) surrogate code unit
that is used for representing supplementary characters in UTF-16
encoding. | |||||||||||
Indicates whether the specified character is a lower case letter.
| |||||||||||
Indicates whether the specified code point is a lower case letter.
| |||||||||||
Indicates whether the specified character is mirrored.
| |||||||||||
Indicates whether the specified code point is mirrored.
| |||||||||||
This method is deprecated.
Use
isWhitespace(char)
| |||||||||||
Indicates whether the specified character is a Unicode space character.
| |||||||||||
Indicates whether the specified code point is a Unicode space character.
| |||||||||||
Indicates whether
codePoint is within the supplementary code
point range. | |||||||||||
Indicates whether the specified character pair is a valid surrogate pair.
| |||||||||||
Indicates whether the specified code point is a titlecase character.
| |||||||||||
Indicates whether the specified character is a titlecase character.
| |||||||||||
Indicates whether the specified character is valid as part of a Unicode
identifier other than the first character.
| |||||||||||
Indicates whether the specified code point is valid as part of a Unicode
identifier other than the first character.
| |||||||||||
Indicates whether the specified code point is a valid initial character
for a Unicode identifier.
| |||||||||||
Indicates whether the specified character is a valid initial character
for a Unicode identifier.
| |||||||||||
Indicates whether the specified character is an upper case letter.
| |||||||||||
Indicates whether the specified code point is an upper case letter.
| |||||||||||
Indicates whether
codePoint is a valid Unicode code point. | |||||||||||
Indicates whether the specified code point is a whitespace character in
Java.
| |||||||||||
Indicates whether the specified character is a whitespace character in
Java.
| |||||||||||
Determines the index in a subsequence of the specified character array
that is offset
codePointOffset code points from index. | |||||||||||
Determines the index in the specified character sequence that is offset
codePointOffset code points from index. | |||||||||||
Reverses the order of the first and second byte in the specified
character.
| |||||||||||
Converts the specified Unicode code point into a UTF-16 encoded sequence
and returns it as a char array.
| |||||||||||
Converts the specified Unicode code point into a UTF-16 encoded sequence
and copies the value(s) into the char array
dst, starting at
index dstIndex. | |||||||||||
Converts a surrogate pair into a Unicode code point.
| |||||||||||
Returns the lower case equivalent for the specified code point if it is
an upper case letter.
| |||||||||||
Returns the lower case equivalent for the specified character if the
character is an upper case letter.
| |||||||||||
Converts the specified character to its string representation.
| |||||||||||
Returns a string containing a concise, human-readable description of this
object.
| |||||||||||
Returns the title case equivalent for the specified code point if it
exists.
| |||||||||||
Returns the title case equivalent for the specified character if it
exists.
| |||||||||||
Returns the upper case equivalent for the specified character if the
character is a lower case letter.
| |||||||||||
Returns the upper case equivalent for the specified code point if the
code point is a lower case letter.
| |||||||||||
Returns a
Character instance for the char value passed. | |||||||||||
|
[Expand]
Inherited Methods | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
From class java.lang.Object
| |||||||||||
|
From interface java.lang.Comparable
| |||||||||||
Unicode category constant Mc.
Unicode category constant Pc.
Unicode category constant Cc.
Unicode category constant Sc.
Unicode category constant Pd.
Unicode category constant Nd.
Unicode bidirectional constant AN.
Unicode bidirectional constant BN.
Unicode bidirectional constant CS.
Unicode bidirectional constant EN.
Unicode bidirectional constant ES.
Unicode bidirectional constant ET.
Unicode bidirectional constant L.
Unicode bidirectional constant LRE.
Unicode bidirectional constant LRO.
Unicode bidirectional constant NSM.
Unicode bidirectional constant ON.
Unicode bidirectional constant B.
Unicode bidirectional constant PDF.
Unicode bidirectional constant R.
Unicode bidirectional constant AL.
Unicode bidirectional constant RLE.
Unicode bidirectional constant RLO.
Unicode bidirectional constant S.
Unicode bidirectional constant.
Unicode bidirectional constant WS.
Unicode category constant Me.
Unicode category constant Pe.
Unicode category constant Pf.
Unicode category constant Cf.
Unicode category constant Pi.
Unicode category constant Nl.
Unicode category constant Zl.
Unicode category constant Ll.
Unicode category constant Sm.
The maximum code point value, U+10FFFF.
The maximum value of a high surrogate or leading surrogate unit in UTF-16
encoding, '?'.
The maximum value of a low surrogate or trailing surrogate unit in UTF-16
encoding, '?'.
The maximum radix used for conversions between characters and integers.
The maximum value of a surrogate unit in UTF-16 encoding, '?'.
The maximum Character value.
The minimum code point value, U+0000.
The minimum value of a high surrogate or leading surrogate unit in UTF-16
encoding, '?'.
The minimum value of a low surrogate or trailing surrogate unit in UTF-16
encoding, '?'.
The minimum radix used for conversions between characters and integers.
The minimum value of a supplementary code point, U+010000.
The minimum value of a surrogate unit in UTF-16 encoding, '?'.
The minimum Character value.
Unicode category constant Lm.
Unicode category constant Sk.
Unicode category constant Mn.
Unicode category constant Lo.
Unicode category constant No.
Unicode category constant Po.
Unicode category constant So.
Unicode category constant Zp.
Unicode category constant Co.
The number of bits required to represent a Character value
unsigned form.
Unicode category constant Zs.
Unicode category constant Ps.
Unicode category constant Cs.
Unicode category constant Lt.
The Class object that represents the primitive type char.
Unicode category constant Cn.
Unicode category constant Lu.
Constructs a new Character with the specified primitive char
value.
| value | the primitive char value to store in the new instance. |
|---|
Calculates the number of char values required to represent the
specified Unicode code point. This method checks if the codePoint
is greater than or equal to 0x10000, in which case 2 is
returned, otherwise 1. To test if the code point is valid, use
the isValidCodePoint(int) method.
| codePoint | the code point for which to calculate the number of required chars. |
|---|
2 if codePoint >= 0x10000; 1 otherwise.Gets the primitive value of this character.
Returns the code point at index in the specified array of
character units. If the unit at index is a high-surrogate unit,
index + 1 is less than the length of the array and the unit at
index + 1 is a low-surrogate unit, then the supplementary code
point represented by the pair is returned; otherwise the char
value at index is returned.
| seq | the source array of char units. |
|---|---|
| index | the position in seq from which to retrieve the code
point. |
char value at index in
seq.| NullPointerException | if seq is null. |
|---|---|
| IndexOutOfBoundsException | if the index is negative or greater than or equal to
the length of seq. |
Returns the code point at index in the specified sequence of
character units. If the unit at index is a high-surrogate unit,
index + 1 is less than the length of the sequence and the unit at
index + 1 is a low-surrogate unit, then the supplementary code
point represented by the pair is returned; otherwise the char
value at index is returned.
| seq | the source sequence of char units. |
|---|---|
| index | the position in seq from which to retrieve the code
point. |
char value at index in
seq.| NullPointerException | if seq is null. |
|---|---|
| IndexOutOfBoundsException | if the index is negative or greater than or equal to
the length of seq. |
Returns the code point at index in the specified array of
character units, where index has to be less than limit.
If the unit at index is a high-surrogate unit, index + 1
is less than limit and the unit at index + 1 is a
low-surrogate unit, then the supplementary code point represented by the
pair is returned; otherwise the char value at index is
returned.
| seq | the source array of char units. |
|---|---|
| index | the position in seq from which to get the code point. |
| limit | the index after the last unit in seq that can be used. |
char value at index in
seq.| NullPointerException | if seq is null. |
|---|---|
| IndexOutOfBoundsException | if index < 0, index >= limit,
limit < 0 or if limit is greater than the
length of seq. |
Returns the code point that precedes index in the specified
sequence of character units. If the unit at index - 1 is a
low-surrogate unit, index - 2 is not negative and the unit at
index - 2 is a high-surrogate unit, then the supplementary code
point represented by the pair is returned; otherwise the char
value at index - 1 is returned.
| seq | the source sequence of char units. |
|---|---|
| index | the position in seq following the code
point that should be returned. |
char value before index
in seq.| NullPointerException | if seq is null. |
|---|---|
| IndexOutOfBoundsException | if the index is less than 1 or greater than the
length of seq. |
Returns the code point that precedes index in the specified
array of character units. If the unit at index - 1 is a
low-surrogate unit, index - 2 is not negative and the unit at
index - 2 is a high-surrogate unit, then the supplementary code
point represented by the pair is returned; otherwise the char
value at index - 1 is returned.
| seq | the source array of char units. |
|---|---|
| index | the position in seq following the code
point that should be returned. |
char value before index
in seq.| NullPointerException | if seq is null. |
|---|---|
| IndexOutOfBoundsException | if the index is less than 1 or greater than the
length of seq. |
Returns the code point that precedes the index in the specified
array of character units and is not less than start. If the unit
at index - 1 is a low-surrogate unit, index - 2 is not
less than start and the unit at index - 2 is a
high-surrogate unit, then the supplementary code point represented by the
pair is returned; otherwise the char value at index - 1
is returned.
| seq | the source array of char units. |
|---|---|
| index | the position in seq following the code point that
should be returned. |
| start | the index of the first element in seq. |
char value before index
in seq.| NullPointerException | if seq is null. |
|---|---|
| IndexOutOfBoundsException | if the index <= start, start < 0,
index is greater than the length of seq, or
if start is equal or greater than the length of
seq. |
Counts the number of Unicode code points in the subsequence of the
specified character sequence, as delineated by beginIndex and
endIndex. Any surrogate values with missing pair values will be
counted as one code point.
| seq | the CharSequence to look through. |
|---|---|
| beginIndex | the inclusive index to begin counting at. |
| endIndex | the exclusive index to stop counting at. |
| NullPointerException | if seq is null. |
|---|---|
| IndexOutOfBoundsException | if beginIndex < 0, beginIndex > endIndex or
if endIndex is greater than the length of seq. |
Counts the number of Unicode code points in the subsequence of the
specified char array, as delineated by offset and count.
Any surrogate values with missing pair values will be counted as one code
point.
| seq | the char array to look through |
|---|---|
| offset | the inclusive index to begin counting at. |
| count | the number of char values to look through in
seq. |
| NullPointerException | if seq is null. |
|---|---|
| IndexOutOfBoundsException | if offset < 0, count < 0 or if
offset + count is greater than the length of
seq. |
Compares this object to the specified character object to determine their relative order.
| c | the character object to compare this object to. |
|---|
0 if the value of this character and the value of
c are equal; a positive value if the value of this
character is greater than the value of c; a negative
value if the value of this character is less than the value of
c.Convenience method to determine the value of the character
codePoint in the supplied radix. The value of radix must
be between MIN_RADIX and MAX_RADIX.
| codePoint | the character, including supplementary characters. |
|---|---|
| radix | the radix. |
Convenience method to determine the value of the specified character
c in the supplied radix. The value of radix must be
between MIN_RADIX and MAX_RADIX.
| c | the character to determine the value of. |
|---|---|
| radix | the radix. |
Compares this object with the specified object and indicates if they are
equal. In order to be equal, object must be an instance of
Character and have the same char value as this object.
| object | the object to compare this double with. |
|---|
true if the specified object is equal to this
Character; false otherwise.
Returns the character which represents the specified digit in the
specified radix. The radix must be between MIN_RADIX and
MAX_RADIX inclusive; digit must not be negative and
smaller than radix. If any of these conditions does not hold, 0
is returned.
| digit | the integer value. |
|---|---|
| radix | the radix. |
digit in the
radix.
Gets the Unicode directionality of the specified character.
| codePoint | the Unicode code point to get the directionality of. |
|---|
codePoint.
Gets the Unicode directionality of the specified character.
| c | the character to get the directionality of. |
|---|
c.
Gets the numeric value of the specified Unicode code point. For example, the code point 'Ⅻ' stands for the Roman number XII, which has the numeric value 12.
| codePoint | the Unicode code point to get the numeric value of. |
|---|
codePoint exists, -1 if there is no numeric value for
codePoint, -2 if the numeric value can not be
represented with an integer.
Gets the numeric value of the specified Unicode character.
| c | the Unicode character to get the numeric value of. |
|---|
c exists, -1 if there is no numeric value for c,
-2 if the numeric value can not be represented with an integer.
Gets the general Unicode category of the specified code point.
| codePoint | the Unicode code point to get the category of. |
|---|
codePoint.
Gets the general Unicode category of the specified character.
| c | the character to get the category of. |
|---|
c.
Returns an integer hash code for this object. By contract, any two
objects for which equals(Object) returns true must return
the same hash code value. This means that subclasses of Object
usually override both methods or neither method.
Indicates whether the specified character is defined in the Unicode specification.
| c | the character to check. |
|---|
true if the general Unicode category of the character is
not UNASSIGNED; false otherwise.
Indicates whether the specified code point is defined in the Unicode specification.
| codePoint | the code point to check. |
|---|
true if the general Unicode category of the code point is
not UNASSIGNED; false otherwise.
Indicates whether the specified code point is a digit.
| codePoint | the code point to check. |
|---|
true if codePoint is a digit; false
otherwise.
Indicates whether the specified character is a digit.
| c | the character to check. |
|---|
true if c is a digit; false
otherwise.
Indicates whether ch is a high- (or leading-) surrogate code unit
that is used for representing supplementary characters in UTF-16
encoding.
| ch | the character to test. |
|---|
true if ch is a high-surrogate code unit;
false otherwise.Indicates whether the specified character is an ISO control character.
| c | the character to check. |
|---|
true if c is an ISO control character;
false otherwise.
Indicates whether the specified code point is an ISO control character.
| c | the code point to check. |
|---|
true if c is an ISO control character;
false otherwise.
Indicates whether the specified code point is ignorable in a Java or Unicode identifier.
| codePoint | the code point to check. |
|---|
true if codePoint is ignorable; false
otherwise.
Indicates whether the specified character is ignorable in a Java or Unicode identifier.
| c | the character to check. |
|---|
true if c is ignorable; false otherwise.
Indicates whether the specified code point is a valid part of a Java identifier other than the first character.
| codePoint | the code point to check. |
|---|
true if c is valid as part of a Java identifier;
false otherwise.
Indicates whether the specified character is a valid part of a Java identifier other than the first character.
| c | the character to check. |
|---|
true if c is valid as part of a Java identifier;
false otherwise.
Indicates whether the specified character is a valid first character for a Java identifier.
| c | the character to check. |
|---|
true if c is a valid first character of a Java
identifier; false otherwise.
Indicates whether the specified code point is a valid first character for a Java identifier.
| codePoint | the code point to check. |
|---|
true if codePoint is a valid start of a Java
identifier; false otherwise.
This method is deprecated.
Use isJavaIdentifierStart(char)
Indicates whether the specified character is a Java letter.
| c | the character to check. |
|---|
true if c is a Java letter; false
otherwise.
This method is deprecated.
Use isJavaIdentifierPart(char)
Indicates whether the specified character is a Java letter or digit character.
| c | the character to check. |
|---|
true if c is a Java letter or digit;
false otherwise.Indicates whether the specified code point is a letter.
| codePoint | the code point to check. |
|---|
true if codePoint is a letter; false
otherwise.
Indicates whether the specified character is a letter.
| c | the character to check. |
|---|
true if c is a letter; false otherwise.
Indicates whether the specified code point is a letter or a digit.
| codePoint | the code point to check. |
|---|
true if codePoint is a letter or a digit;
false otherwise.
Indicates whether the specified character is a letter or a digit.
| c | the character to check. |
|---|
true if c is a letter or a digit; false
otherwise.
Indicates whether ch is a low- (or trailing-) surrogate code unit
that is used for representing supplementary characters in UTF-16
encoding.
| ch | the character to test. |
|---|
true if ch is a low-surrogate code unit;
false otherwise.Indicates whether the specified character is a lower case letter.
| c | the character to check. |
|---|
true if c is a lower case letter; false
otherwise.
Indicates whether the specified code point is a lower case letter.
| codePoint | the code point to check. |
|---|
true if codePoint is a lower case letter;
false otherwise.
Indicates whether the specified character is mirrored.
| c | the character to check. |
|---|
true if c is mirrored; false
otherwise.
Indicates whether the specified code point is mirrored.
| codePoint | the code point to check. |
|---|
true if codePoint is mirrored, false
otherwise.
This method is deprecated.
Use isWhitespace(char)
Indicates whether the specified character is a Java space.
| c | the character to check. |
|---|
true if c is a Java space; false
otherwise.Indicates whether the specified character is a Unicode space character. That is, if it is a member of one of the Unicode categories Space Separator, Line Separator, or Paragraph Separator.
| c | the character to check. |
|---|
true if c is a Unicode space character,
false otherwise.
Indicates whether the specified code point is a Unicode space character. That is, if it is a member of one of the Unicode categories Space Separator, Line Separator, or Paragraph Separator.
| codePoint | the code point to check. |
|---|
true if codePoint is a Unicode space character,
false otherwise.
Indicates whether codePoint is within the supplementary code
point range.
| codePoint | the code point to test. |
|---|
true if codePoint is within the supplementary
code point range; false otherwise.Indicates whether the specified character pair is a valid surrogate pair.
| high | the high surrogate unit to test. |
|---|---|
| low | the low surrogate unit to test. |
true if high is a high-surrogate code unit and
low is a low-surrogate code unit; false
otherwise.Indicates whether the specified code point is a titlecase character.
| codePoint | the code point to check. |
|---|
true if codePoint is a titlecase character,
false otherwise.
Indicates whether the specified character is a titlecase character.
| c | the character to check. |
|---|
true if c is a titlecase character, false
otherwise.
Indicates whether the specified character is valid as part of a Unicode identifier other than the first character.
| c | the character to check. |
|---|
true if c is valid as part of a Unicode
identifier; false otherwise.
Indicates whether the specified code point is valid as part of a Unicode identifier other than the first character.
| codePoint | the code point to check. |
|---|
true if codePoint is valid as part of a Unicode
identifier; false otherwise.
Indicates whether the specified code point is a valid initial character for a Unicode identifier.
| codePoint | the code point to check. |
|---|
true if codePoint is a valid first character for
a Unicode identifier; false otherwise.
Indicates whether the specified character is a valid initial character for a Unicode identifier.
| c | the character to check. |
|---|
true if c is a valid first character for a
Unicode identifier; false otherwise.
Indicates whether the specified character is an upper case letter.
| c | the character to check. |
|---|
true if c is a upper case letter; false
otherwise.
Indicates whether the specified code point is an upper case letter.
| codePoint | the code point to check. |
|---|
true if codePoint is a upper case letter;
false otherwise.
Indicates whether codePoint is a valid Unicode code point.
| codePoint | the code point to test. |
|---|
true if codePoint is a valid Unicode code point;
false otherwise.Indicates whether the specified code point is a whitespace character in Java.
| codePoint | the code point to check. |
|---|
true if the supplied c is a whitespace character
in Java; false otherwise.
Indicates whether the specified character is a whitespace character in Java.
| c | the character to check. |
|---|
true if the supplied c is a whitespace character
in Java; false otherwise.
Determines the index in a subsequence of the specified character array
that is offset codePointOffset code points from index.
The subsequence is delineated by start and count.
| seq | the character array to find the index in. |
|---|---|
| start | the inclusive index that marks the beginning of the subsequence. |
| count | the number of char values to include within the
subsequence. |
| index | the start index in the subsequence of the char array. |
| codePointOffset | the number of code points to look backwards or forwards; may be a negative or positive value. |
seq that is codePointOffset code
points away from index.| NullPointerException | if seq is null. |
|---|---|
| IndexOutOfBoundsException | if start < 0, count < 0,
index < start, index > start + count,
start + count is greater than the length of
seq, or if there are not enough values in
seq to skip codePointOffset code points
forward or backward (if codePointOffset is
negative) from index. |
Determines the index in the specified character sequence that is offset
codePointOffset code points from index.
| seq | the character sequence to find the index in. |
|---|---|
| index | the start index in seq. |
| codePointOffset | the number of code points to look backwards or forwards; may be a negative or positive value. |
seq that is codePointOffset code
points away from index.| NullPointerException | if seq is null. |
|---|---|
| IndexOutOfBoundsException | if index < 0, index is greater than the
length of seq, or if there are not enough values in
seq to skip codePointOffset code points
forwards or backwards (if codePointOffset is
negative) from index. |
Reverses the order of the first and second byte in the specified character.
| c | the character to reverse. |
|---|
Converts the specified Unicode code point into a UTF-16 encoded sequence and returns it as a char array.
| codePoint | the Unicode code point to encode. |
|---|
codePoint is a
supplementary code point,
then the returned array contains two characters, otherwise it
contains just one character.| IllegalArgumentException | if codePoint is not a valid Unicode code point. |
|---|
Converts the specified Unicode code point into a UTF-16 encoded sequence
and copies the value(s) into the char array dst, starting at
index dstIndex.
| codePoint | the Unicode code point to encode. |
|---|---|
| dst | the destination array to copy the encoded value into. |
| dstIndex | the index in dst from where to start copying. |
char value units copied into dst.| IllegalArgumentException | if codePoint is not a valid Unicode code point. |
|---|---|
| NullPointerException | if dst is null. |
| IndexOutOfBoundsException | if dstIndex is negative, greater than or equal to
dst.length or equals dst.length - 1 when
codePoint is a
supplementary code point. |
Converts a surrogate pair into a Unicode code point. This method assumes
that the pair are valid surrogates. If the pair are not valid
surrogates, then the result is indeterminate. The
isSurrogatePair(char, char) method should be used prior to this
method to validate the pair.
| high | the high surrogate unit. |
|---|---|
| low | the low surrogate unit. |
Returns the lower case equivalent for the specified code point if it is an upper case letter. Otherwise, the specified code point is returned unchanged.
| codePoint | the code point to check. |
|---|
codePoint is an upper case character then its lower
case counterpart, otherwise just codePoint.
Returns the lower case equivalent for the specified character if the character is an upper case letter. Otherwise, the specified character is returned unchanged.
| c | the character |
|---|
c is an upper case character then its lower case
counterpart, otherwise just c.
Converts the specified character to its string representation.
| value | the character to convert. |
|---|
Returns a string containing a concise, human-readable description of this
object. Subclasses are encouraged to override this method and provide an
implementation that takes into account the object's type and data. The
default implementation simply concatenates the class name, the '@' sign
and a hexadecimal representation of the object's hashCode(),
that is, it is equivalent to the following expression:
getClass().getName() + '@' + Integer.toHexString(hashCode())
Returns the title case equivalent for the specified code point if it exists. Otherwise, the specified code point is returned unchanged.
| codePoint | the code point to convert. |
|---|
codePoint if it exists,
otherwise codePoint.
Returns the title case equivalent for the specified character if it exists. Otherwise, the specified character is returned unchanged.
| c | the character to convert. |
|---|
c if it exists, otherwise
c.
Returns the upper case equivalent for the specified character if the character is a lower case letter. Otherwise, the specified character is returned unchanged.
| c | the character to convert. |
|---|
c is a lower case character then its upper case
counterpart, otherwise just c.
Returns the upper case equivalent for the specified code point if the code point is a lower case letter. Otherwise, the specified code point is returned unchanged.
| codePoint | the code point to convert. |
|---|
codePoint is a lower case character then its upper
case counterpart, otherwise just codePoint.
Returns a Character instance for the char value passed.
If it is not necessary to get a new Character instance, it is
recommended to use this method instead of the constructor, since it
maintains a cache of instances which may result in better performance.
| c | the char value for which to get a Character instance. |
|---|
Character instance for c.