atafdreg.h

Go to the documentation of this file.

#ifndef _LINUX_FDREG_H
#define _LINUX_FDREG_H

/*
** WD1772 stuff
 */

/* register codes */

#define FDCSELREG_STP   (0x80)   /* command/status register */
#define FDCSELREG_TRA   (0x82)   /* track register */
#define FDCSELREG_SEC   (0x84)   /* sector register */
#define FDCSELREG_DTA   (0x86)   /* data register */

/* register names for FDC_READ/WRITE macros */

#define FDCREG_CMD      0
#define FDCREG_STATUS   0
#define FDCREG_TRACK    2
#define FDCREG_SECTOR   4
#define FDCREG_DATA     6

/* command opcodes */

#define FDCCMD_RESTORE  (0x00)   /*  -                   */
#define FDCCMD_SEEK     (0x10)   /*   |                  */
#define FDCCMD_STEP     (0x20)   /*   |  TYP 1 Commands  */
#define FDCCMD_STIN     (0x40)   /*   |                  */
#define FDCCMD_STOT     (0x60)   /*  -                   */
#define FDCCMD_RDSEC    (0x80)   /*  -   TYP 2 Commands  */
#define FDCCMD_WRSEC    (0xa0)   /*  -          "        */
#define FDCCMD_RDADR    (0xc0)   /*  -                   */
#define FDCCMD_RDTRA    (0xe0)   /*   |  TYP 3 Commands  */
#define FDCCMD_WRTRA    (0xf0)   /*  -                   */
#define FDCCMD_FORCI    (0xd0)   /*  -   TYP 4 Command   */

/* command modifier bits */

#define FDCCMDADD_SR6   (0x00)   /* step rate settings */
#define FDCCMDADD_SR12  (0x01)
#define FDCCMDADD_SR2   (0x02)
#define FDCCMDADD_SR3   (0x03)
#define FDCCMDADD_V     (0x04)   /* verify */
#define FDCCMDADD_H     (0x08)   /* wait for spin-up */
#define FDCCMDADD_U     (0x10)   /* update track register */
#define FDCCMDADD_M     (0x10)   /* multiple sector access */
#define FDCCMDADD_E     (0x04)   /* head settling flag */
#define FDCCMDADD_P     (0x02)   /* precompensation off */
#define FDCCMDADD_A0    (0x01)   /* DAM flag */

/* status register bits */

#define FDCSTAT_MOTORON (0x80)   /* motor on */
#define FDCSTAT_WPROT   (0x40)   /* write protected (FDCCMD_WR*) */
#define FDCSTAT_SPINUP  (0x20)   /* motor speed stable (Type I) */
#define FDCSTAT_DELDAM  (0x20)   /* sector has deleted DAM (Type II+III) */
#define FDCSTAT_RECNF   (0x10)   /* record not found */
#define FDCSTAT_CRC     (0x08)   /* CRC error */
#define FDCSTAT_TR00    (0x04)   /* Track 00 flag (Type I) */
#define FDCSTAT_LOST    (0x04)   /* Lost Data (Type II+III) */
#define FDCSTAT_IDX     (0x02)   /* Index status (Type I) */
#define FDCSTAT_DRQ     (0x02)   /* DRQ status (Type II+III) */
#define FDCSTAT_BUSY    (0x01)   /* FDC is busy */


/* PSG Port A Bit Nr 0 .. Side Sel .. 0 -> Side 1  1 -> Side 2 */
#define DSKSIDE     (0x01)

#define DSKDRVNONE  (0x06)
#define DSKDRV0     (0x02)
#define DSKDRV1     (0x04)

/* step rates */
#define FDCSTEP_6   0x00
#define FDCSTEP_12  0x01
#define FDCSTEP_2   0x02
#define FDCSTEP_3   0x03

#endif