bcma_regs.h

Go to the documentation of this file.

#ifndef LINUX_BCMA_REGS_H_
#define LINUX_BCMA_REGS_H_

/* Some single registers are shared between many cores */
/* BCMA_CLKCTLST: ChipCommon (rev >= 20), PCIe, 80211 */
#define BCMA_CLKCTLST           0x01E0 /* Clock control and status */
#define  BCMA_CLKCTLST_FORCEALP     0x00000001 /* Force ALP request */
#define  BCMA_CLKCTLST_FORCEHT      0x00000002 /* Force HT request */
#define  BCMA_CLKCTLST_FORCEILP     0x00000004 /* Force ILP request */
#define  BCMA_CLKCTLST_HAVEALPREQ   0x00000008 /* ALP available request */
#define  BCMA_CLKCTLST_HAVEHTREQ    0x00000010 /* HT available request */
#define  BCMA_CLKCTLST_HWCROFF      0x00000020 /* Force HW clock request off */
#define  BCMA_CLKCTLST_EXTRESREQ    0x00000700 /* Mask of external resource requests */
#define  BCMA_CLKCTLST_EXTRESREQ_SHIFT  8
#define  BCMA_CLKCTLST_HAVEALP      0x00010000 /* ALP available */
#define  BCMA_CLKCTLST_HAVEHT       0x00020000 /* HT available */
#define  BCMA_CLKCTLST_BP_ON_ALP    0x00040000 /* RO: running on ALP clock */
#define  BCMA_CLKCTLST_BP_ON_HT     0x00080000 /* RO: running on HT clock */
#define  BCMA_CLKCTLST_EXTRESST     0x07000000 /* Mask of external resource status */
#define  BCMA_CLKCTLST_EXTRESST_SHIFT   24
/* Is there any BCM4328 on BCMA bus? */
#define  BCMA_CLKCTLST_4328A0_HAVEHT    0x00010000 /* 4328a0 has reversed bits */
#define  BCMA_CLKCTLST_4328A0_HAVEALP   0x00020000 /* 4328a0 has reversed bits */

/* Agent registers (common for every core) */
#define BCMA_IOCTL          0x0408 /* IO control */
#define  BCMA_IOCTL_CLK         0x0001
#define  BCMA_IOCTL_FGC         0x0002
#define  BCMA_IOCTL_CORE_BITS       0x3FFC
#define  BCMA_IOCTL_PME_EN      0x4000
#define  BCMA_IOCTL_BIST_EN     0x8000
#define BCMA_IOST           0x0500 /* IO status */
#define  BCMA_IOST_CORE_BITS        0x0FFF
#define  BCMA_IOST_DMA64        0x1000
#define  BCMA_IOST_GATED_CLK        0x2000
#define  BCMA_IOST_BIST_ERROR       0x4000
#define  BCMA_IOST_BIST_DONE        0x8000
#define BCMA_RESET_CTL          0x0800
#define  BCMA_RESET_CTL_RESET       0x0001

/* BCMA PCI config space registers. */
#define BCMA_PCI_PMCSR          0x44
#define  BCMA_PCI_PE            0x100
#define BCMA_PCI_BAR0_WIN       0x80    /* Backplane address space 0 */
#define BCMA_PCI_BAR1_WIN       0x84    /* Backplane address space 1 */
#define BCMA_PCI_SPROMCTL       0x88    /* SPROM control */
#define  BCMA_PCI_SPROMCTL_WE       0x10    /* SPROM write enable */
#define BCMA_PCI_BAR1_CONTROL       0x8c    /* Address space 1 burst control */
#define BCMA_PCI_IRQS           0x90    /* PCI interrupts */
#define BCMA_PCI_IRQMASK        0x94    /* PCI IRQ control and mask (pcirev >= 6 only) */
#define BCMA_PCI_BACKPLANE_IRQS     0x98    /* Backplane Interrupts */
#define BCMA_PCI_BAR0_WIN2      0xAC
#define BCMA_PCI_GPIO_IN        0xB0    /* GPIO Input (pcirev >= 3 only) */
#define BCMA_PCI_GPIO_OUT       0xB4    /* GPIO Output (pcirev >= 3 only) */
#define BCMA_PCI_GPIO_OUT_ENABLE    0xB8    /* GPIO Output Enable/Disable (pcirev >= 3 only) */
#define  BCMA_PCI_GPIO_SCS      0x10    /* PCI config space bit 4 for 4306c0 slow clock source */
#define  BCMA_PCI_GPIO_HWRAD        0x20    /* PCI config space GPIO 13 for hw radio disable */
#define  BCMA_PCI_GPIO_XTAL     0x40    /* PCI config space GPIO 14 for Xtal powerup */
#define  BCMA_PCI_GPIO_PLL      0x80    /* PCI config space GPIO 15 for PLL powerdown */

/* SiliconBackplane Address Map.
 * All regions may not exist on all chips.
 */
#define BCMA_SOC_SDRAM_BASE     0x00000000U /* Physical SDRAM */
#define BCMA_SOC_PCI_MEM        0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */
#define BCMA_SOC_PCI_MEM_SZ     (64 * 1024 * 1024)
#define BCMA_SOC_PCI_CFG        0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */
#define BCMA_SOC_SDRAM_SWAPPED      0x10000000U /* Byteswapped Physical SDRAM */
#define BCMA_SOC_SDRAM_R2       0x80000000U /* Region 2 for sdram (512 MB) */


#define BCMA_SOC_PCI_DMA        0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */
#define BCMA_SOC_PCI_DMA2       0x80000000U /* Client Mode sb2pcitranslation2 (1 GB) */
#define BCMA_SOC_PCI_DMA_SZ     0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */
#define BCMA_SOC_PCIE_DMA_L32       0x00000000U /* PCIE Client Mode sb2pcitranslation2
                             * (2 ZettaBytes), low 32 bits
                             */
#define BCMA_SOC_PCIE_DMA_H32       0x80000000U /* PCIE Client Mode sb2pcitranslation2
                             * (2 ZettaBytes), high 32 bits
                             */

#define BCMA_SOC_PCI1_MEM       0x40000000U /* Host Mode sb2pcitranslation0 (64 MB) */
#define BCMA_SOC_PCI1_CFG       0x44000000U /* Host Mode sb2pcitranslation1 (64 MB) */
#define BCMA_SOC_PCIE1_DMA_H32      0xc0000000U /* PCIE Client Mode sb2pcitranslation2
                             * (2 ZettaBytes), high 32 bits
                             */

#define BCMA_SFLASH         0x1c000000

#endif /* LINUX_BCMA_REGS_H_ */