Linux Kernel  3.7.1
 All Data Structures Namespaces Files Functions Variables Typedefs Enumerations Enumerator Macros Groups Pages
defBF542.h
Go to the documentation of this file.
1 /*
2  * Copyright 2007-2010 Analog Devices Inc.
3  *
4  * Licensed under the Clear BSD license or the GPL-2 (or later)
5  */
6 
7 #ifndef _DEF_BF542_H
8 #define _DEF_BF542_H
9 
10 /* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
11 #include "defBF54x_base.h"
12 
13 /* The following are the #defines needed by ADSP-BF542 that are not in the common header */
14 
15 /* ATAPI Registers */
16 
17 #define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */
18 #define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */
19 #define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */
20 #define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */
21 #define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */
22 #define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */
23 #define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */
24 #define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */
25 #define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */
26 #define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */
27 #define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */
28 #define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */
29 #define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */
30 #define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */
31 #define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */
32 #define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */
33 #define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */
34 #define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */
35 #define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */
36 #define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */
37 #define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */
38 #define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */
39 #define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */
40 #define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */
41 #define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */
42 
43 /* SDH Registers */
44 
45 #define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */
46 #define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */
47 #define SDH_ARGUMENT 0xffc03908 /* SDH Argument */
48 #define SDH_COMMAND 0xffc0390c /* SDH Command */
49 #define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */
50 #define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */
51 #define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */
52 #define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */
53 #define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */
54 #define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */
55 #define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */
56 #define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */
57 #define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */
58 #define SDH_STATUS 0xffc03934 /* SDH Status */
59 #define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */
60 #define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */
61 #define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */
62 #define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */
63 #define SDH_FIFO 0xffc03980 /* SDH Data FIFO */
64 #define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */
65 #define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */
66 #define SDH_CFG 0xffc039c8 /* SDH Configuration */
67 #define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */
68 #define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */
69 #define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */
70 #define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */
71 #define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */
72 #define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */
73 #define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */
74 #define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */
75 #define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */
76 
77 /* USB Control Registers */
78 
79 #define USB_FADDR 0xffc03c00 /* Function address register */
80 #define USB_POWER 0xffc03c04 /* Power management register */
81 #define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
82 #define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */
83 #define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */
84 #define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */
85 #define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */
86 #define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */
87 #define USB_FRAME 0xffc03c20 /* USB frame number */
88 #define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */
89 #define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */
90 #define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */
91 #define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */
92 
93 /* USB Packet Control Registers */
94 
95 #define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */
96 #define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
97 #define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
98 #define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */
99 #define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */
100 #define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
101 #define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
102 #define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
103 #define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
104 #define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
105 #define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
106 #define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
107 #define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */
108 
109 /* USB Endpoint FIFO Registers */
110 
111 #define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */
112 #define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */
113 #define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */
114 #define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */
115 #define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */
116 #define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */
117 #define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */
118 #define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */
119 
120 /* USB OTG Control Registers */
121 
122 #define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */
123 #define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */
124 #define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */
125 
126 /* USB Phy Control Registers */
127 
128 #define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */
129 #define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */
130 #define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */
131 #define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */
132 #define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */
133 
134 /* (APHY_CNTRL is for ADI usage only) */
135 
136 #define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */
137 
138 /* (APHY_CALIB is for ADI usage only) */
139 
140 #define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */
141 #define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
142 
143 /* (PHY_TEST is for ADI usage only) */
144 
145 #define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */
146 #define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */
147 #define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
148 
149 /* USB Endpoint 0 Control Registers */
150 
151 #define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */
152 #define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */
153 #define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */
154 #define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */
155 #define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */
156 #define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
157 #define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */
158 #define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
159 #define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
160 
161 /* USB Endpoint 1 Control Registers */
162 
163 #define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */
164 #define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */
165 #define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */
166 #define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */
167 #define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */
168 #define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */
169 #define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
170 #define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */
171 #define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
172 #define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
173 
174 /* USB Endpoint 2 Control Registers */
175 
176 #define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
177 #define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */
178 #define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */
179 #define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */
180 #define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */
181 #define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */
182 #define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
183 #define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */
184 #define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
185 #define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
186 
187 /* USB Endpoint 3 Control Registers */
188 
189 #define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */
190 #define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */
191 #define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */
192 #define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */
193 #define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */
194 #define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */
195 #define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
196 #define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */
197 #define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
198 #define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
199 
200 /* USB Endpoint 4 Control Registers */
201 
202 #define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
203 #define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */
204 #define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */
205 #define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */
206 #define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */
207 #define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */
208 #define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
209 #define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */
210 #define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
211 #define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
212 
213 /* USB Endpoint 5 Control Registers */
214 
215 #define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */
216 #define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */
217 #define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */
218 #define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */
219 #define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */
220 #define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */
221 #define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
222 #define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */
223 #define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
224 #define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
225 
226 /* USB Endpoint 6 Control Registers */
227 
228 #define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
229 #define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */
230 #define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */
231 #define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */
232 #define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */
233 #define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */
234 #define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
235 #define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */
236 #define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
237 #define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
238 
239 /* USB Endpoint 7 Control Registers */
240 
241 #define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */
242 #define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */
243 #define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */
244 #define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */
245 #define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */
246 #define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */
247 #define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
248 #define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */
249 #define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
250 #define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
251 #define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
252 #define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */
253 
254 /* USB Channel 0 Config Registers */
255 
256 #define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */
257 #define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
258 #define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
259 #define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
260 #define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
261 
262 /* USB Channel 1 Config Registers */
263 
264 #define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */
265 #define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
266 #define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
267 #define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
268 #define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
269 
270 /* USB Channel 2 Config Registers */
271 
272 #define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */
273 #define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
274 #define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
275 #define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
276 #define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
277 
278 /* USB Channel 3 Config Registers */
279 
280 #define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */
281 #define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
282 #define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
283 #define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
284 #define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
285 
286 /* USB Channel 4 Config Registers */
287 
288 #define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */
289 #define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
290 #define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
291 #define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
292 #define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
293 
294 /* USB Channel 5 Config Registers */
295 
296 #define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */
297 #define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
298 #define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
299 #define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
300 #define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
301 
302 /* USB Channel 6 Config Registers */
303 
304 #define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */
305 #define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
306 #define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
307 #define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
308 #define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
309 
310 /* USB Channel 7 Config Registers */
311 
312 #define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */
313 #define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
314 #define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
315 #define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
316 #define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
317 
318 /* Keypad Registers */
319 
320 #define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */
321 #define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */
322 #define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */
323 #define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */
324 #define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */
325 #define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */
326 
327 
328 /* ********************************************************** */
329 /* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
330 /* and MULTI BIT READ MACROS */
331 /* ********************************************************** */
332 
333 /* Bit masks for KPAD_CTL */
334 
335 #define KPAD_EN 0x1 /* Keypad Enable */
336 #define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */
337 #define KPAD_ROWEN 0x1c00 /* Row Enable Width */
338 #define KPAD_COLEN 0xe000 /* Column Enable Width */
339 
340 /* Bit masks for KPAD_PRESCALE */
341 
342 #define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */
343 
344 /* Bit masks for KPAD_MSEL */
345 
346 #define DBON_SCALE 0xff /* Debounce Scale Value */
347 #define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */
348 
349 /* Bit masks for KPAD_ROWCOL */
350 
351 #define KPAD_ROW 0xff /* Rows Pressed */
352 #define KPAD_COL 0xff00 /* Columns Pressed */
353 
354 /* Bit masks for KPAD_STAT */
355 
356 #define KPAD_IRQ 0x1 /* Keypad Interrupt Status */
357 #define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */
358 #define KPAD_PRESSED 0x8 /* Key press current status */
359 
360 /* Bit masks for KPAD_SOFTEVAL */
361 
362 #define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */
363 
364 /* Bit masks for ATAPI_CONTROL */
365 
366 #define PIO_START 0x1 /* Start PIO/Reg Op */
367 #define MULTI_START 0x2 /* Start Multi-DMA Op */
368 #define ULTRA_START 0x4 /* Start Ultra-DMA Op */
369 #define XFER_DIR 0x8 /* Transfer Direction */
370 #define IORDY_EN 0x10 /* IORDY Enable */
371 #define FIFO_FLUSH 0x20 /* Flush FIFOs */
372 #define SOFT_RST 0x40 /* Soft Reset */
373 #define DEV_RST 0x80 /* Device Reset */
374 #define TFRCNT_RST 0x100 /* Trans Count Reset */
375 #define END_ON_TERM 0x200 /* End/Terminate Select */
376 #define PIO_USE_DMA 0x400 /* PIO-DMA Enable */
377 #define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */
378 
379 /* Bit masks for ATAPI_STATUS */
380 
381 #define PIO_XFER_ON 0x1 /* PIO transfer in progress */
382 #define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */
383 #define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */
384 #define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */
385 
386 /* Bit masks for ATAPI_DEV_ADDR */
387 
388 #define DEV_ADDR 0x1f /* Device Address */
389 
390 /* Bit masks for ATAPI_INT_MASK */
391 
392 #define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */
393 #define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */
394 #define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */
395 #define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */
396 #define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */
397 #define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */
398 #define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */
399 #define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */
400 #define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */
401 
402 /* Bit masks for ATAPI_INT_STATUS */
403 
404 #define ATAPI_DEV_INT 0x1 /* Device interrupt status */
405 #define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */
406 #define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */
407 #define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */
408 #define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */
409 #define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */
410 #define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */
411 #define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */
412 #define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */
413 
414 /* Bit masks for ATAPI_LINE_STATUS */
415 
416 #define ATAPI_INTR 0x1 /* Device interrupt to host line status */
417 #define ATAPI_DASP 0x2 /* Device dasp to host line status */
418 #define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */
419 #define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */
420 #define ATAPI_ADDR 0x70 /* ATAPI address line status */
421 #define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */
422 #define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */
423 #define ATAPI_DIOWN 0x200 /* ATAPI write line status */
424 #define ATAPI_DIORN 0x400 /* ATAPI read line status */
425 #define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */
426 
427 /* Bit masks for ATAPI_SM_STATE */
428 
429 #define PIO_CSTATE 0xf /* PIO mode state machine current state */
430 #define DMA_CSTATE 0xf0 /* DMA mode state machine current state */
431 #define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */
432 #define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */
433 
434 /* Bit masks for ATAPI_TERMINATE */
435 
436 #define ATAPI_HOST_TERM 0x1 /* Host terminationation */
437 
438 /* Bit masks for ATAPI_REG_TIM_0 */
439 
440 #define T2_REG 0xff /* End of cycle time for register access transfers */
441 #define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */
442 
443 /* Bit masks for ATAPI_PIO_TIM_0 */
444 
445 #define T1_REG 0xf /* Time from address valid to DIOR/DIOW */
446 #define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */
447 #define T4_REG 0xf000 /* DIOW data hold */
448 
449 /* Bit masks for ATAPI_PIO_TIM_1 */
450 
451 #define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */
452 
453 /* Bit masks for ATAPI_MULTI_TIM_0 */
454 
455 #define TD 0xff /* DIOR/DIOW asserted pulsewidth */
456 #define TM 0xff00 /* Time from address valid to DIOR/DIOW */
457 
458 /* Bit masks for ATAPI_MULTI_TIM_1 */
459 
460 #define TKW 0xff /* Selects DIOW negated pulsewidth */
461 #define TKR 0xff00 /* Selects DIOR negated pulsewidth */
462 
463 /* Bit masks for ATAPI_MULTI_TIM_2 */
464 
465 #define TH 0xff /* Selects DIOW data hold */
466 #define TEOC 0xff00 /* Selects end of cycle for DMA */
467 
468 /* Bit masks for ATAPI_ULTRA_TIM_0 */
469 
470 #define TACK 0xff /* Selects setup and hold times for TACK */
471 #define TENV 0xff00 /* Selects envelope time */
472 
473 /* Bit masks for ATAPI_ULTRA_TIM_1 */
474 
475 #define TDVS 0xff /* Selects data valid setup time */
476 #define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */
477 
478 /* Bit masks for ATAPI_ULTRA_TIM_2 */
479 
480 #define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
481 #define TMLI 0xff00 /* Selects interlock time */
482 
483 /* Bit masks for ATAPI_ULTRA_TIM_3 */
484 
485 #define TZAH 0xff /* Selects minimum delay required for output */
486 #define READY_PAUSE 0xff00 /* Selects ready to pause */
487 
488 /* Bit masks for USB_FADDR */
489 
490 #define FUNCTION_ADDRESS 0x7f /* Function address */
491 
492 /* Bit masks for USB_POWER */
493 
494 #define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */
495 #define SUSPEND_MODE 0x2 /* Suspend Mode indicator */
496 #define RESUME_MODE 0x4 /* DMA Mode */
497 #define RESET 0x8 /* Reset indicator */
498 #define HS_MODE 0x10 /* High Speed mode indicator */
499 #define HS_ENABLE 0x20 /* high Speed Enable */
500 #define SOFT_CONN 0x40 /* Soft connect */
501 #define ISO_UPDATE 0x80 /* Isochronous update */
502 
503 /* Bit masks for USB_INTRTX */
504 
505 #define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */
506 #define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */
507 #define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */
508 #define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */
509 #define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */
510 #define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */
511 #define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */
512 #define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */
513 
514 /* Bit masks for USB_INTRRX */
515 
516 #define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */
517 #define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */
518 #define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */
519 #define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */
520 #define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */
521 #define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */
522 #define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */
523 
524 /* Bit masks for USB_INTRTXE */
525 
526 #define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */
527 #define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */
528 #define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */
529 #define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */
530 #define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */
531 #define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */
532 #define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */
533 #define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */
534 
535 /* Bit masks for USB_INTRRXE */
536 
537 #define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */
538 #define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */
539 #define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */
540 #define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */
541 #define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */
542 #define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */
543 #define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */
544 
545 /* Bit masks for USB_INTRUSB */
546 
547 #define SUSPEND_B 0x1 /* Suspend indicator */
548 #define RESUME_B 0x2 /* Resume indicator */
549 #define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */
550 #define SOF_B 0x8 /* Start of frame */
551 #define CONN_B 0x10 /* Connection indicator */
552 #define DISCON_B 0x20 /* Disconnect indicator */
553 #define SESSION_REQ_B 0x40 /* Session Request */
554 #define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */
555 
556 /* Bit masks for USB_INTRUSBE */
557 
558 #define SUSPEND_BE 0x1 /* Suspend indicator int enable */
559 #define RESUME_BE 0x2 /* Resume indicator int enable */
560 #define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */
561 #define SOF_BE 0x8 /* Start of frame int enable */
562 #define CONN_BE 0x10 /* Connection indicator int enable */
563 #define DISCON_BE 0x20 /* Disconnect indicator int enable */
564 #define SESSION_REQ_BE 0x40 /* Session Request int enable */
565 #define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */
566 
567 /* Bit masks for USB_FRAME */
568 
569 #define FRAME_NUMBER 0x7ff /* Frame number */
570 
571 /* Bit masks for USB_INDEX */
572 
573 #define SELECTED_ENDPOINT 0xf /* selected endpoint */
574 
575 /* Bit masks for USB_GLOBAL_CTL */
576 
577 #define GLOBAL_ENA 0x1 /* enables USB module */
578 #define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */
579 #define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */
580 #define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */
581 #define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */
582 #define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */
583 #define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */
584 #define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */
585 #define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */
586 #define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */
587 #define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */
588 #define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */
589 #define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */
590 #define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */
591 #define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */
592 
593 /* Bit masks for USB_OTG_DEV_CTL */
594 
595 #define SESSION 0x1 /* session indicator */
596 #define HOST_REQ 0x2 /* Host negotiation request */
597 #define HOST_MODE 0x4 /* indicates USBDRC is a host */
598 #define VBUS0 0x8 /* Vbus level indicator[0] */
599 #define VBUS1 0x10 /* Vbus level indicator[1] */
600 #define LSDEV 0x20 /* Low-speed indicator */
601 #define FSDEV 0x40 /* Full or High-speed indicator */
602 #define B_DEVICE 0x80 /* A' or 'B' device indicator */
603 
604 /* Bit masks for USB_OTG_VBUS_IRQ */
605 
606 #define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */
607 #define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */
608 #define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */
609 #define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */
610 #define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */
611 #define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */
612 
613 /* Bit masks for USB_OTG_VBUS_MASK */
614 
615 #define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */
616 #define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */
617 #define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */
618 #define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */
619 #define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */
620 #define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */
621 
622 /* Bit masks for USB_CSR0 */
623 
624 #define RXPKTRDY 0x1 /* data packet receive indicator */
625 #define TXPKTRDY 0x2 /* data packet in FIFO indicator */
626 #define STALL_SENT 0x4 /* STALL handshake sent */
627 #define DATAEND 0x8 /* Data end indicator */
628 #define SETUPEND 0x10 /* Setup end */
629 #define SENDSTALL 0x20 /* Send STALL handshake */
630 #define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */
631 #define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */
632 #define FLUSHFIFO 0x100 /* flush endpoint FIFO */
633 #define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */
634 #define SETUPPKT_H 0x8 /* send Setup token host mode */
635 #define ERROR_H 0x10 /* timeout error indicator host mode */
636 #define REQPKT_H 0x20 /* Request an IN transaction host mode */
637 #define STATUSPKT_H 0x40 /* Status stage transaction host mode */
638 #define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */
639 
640 /* Bit masks for USB_COUNT0 */
641 
642 #define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */
643 
644 /* Bit masks for USB_NAKLIMIT0 */
645 
646 #define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */
647 
648 /* Bit masks for USB_TX_MAX_PACKET */
649 
650 #define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */
651 
652 /* Bit masks for USB_RX_MAX_PACKET */
653 
654 #define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */
655 
656 /* Bit masks for USB_TXCSR */
657 
658 #define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */
659 #define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */
660 #define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */
661 #define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */
662 #define STALL_SEND_T 0x10 /* issue a Stall handshake */
663 #define STALL_SENT_T 0x20 /* Stall handshake transmitted */
664 #define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */
665 #define INCOMPTX_T 0x80 /* indicates that a large packet is split */
666 #define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */
667 #define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */
668 #define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */
669 #define ISO_T 0x4000 /* enable Isochronous transfers */
670 #define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */
671 #define ERROR_TH 0x4 /* error condition host mode */
672 #define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */
673 #define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */
674 
675 /* Bit masks for USB_TXCOUNT */
676 
677 #define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */
678 
679 /* Bit masks for USB_RXCSR */
680 
681 #define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */
682 #define FIFO_FULL_R 0x2 /* FIFO not empty */
683 #define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */
684 #define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */
685 #define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */
686 #define STALL_SEND_R 0x20 /* issue a Stall handshake */
687 #define STALL_SENT_R 0x40 /* Stall handshake transmitted */
688 #define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */
689 #define INCOMPRX_R 0x100 /* indicates that a large packet is split */
690 #define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */
691 #define DISNYET_R 0x1000 /* disable Nyet handshakes */
692 #define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */
693 #define ISO_R 0x4000 /* enable Isochronous transfers */
694 #define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */
695 #define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */
696 #define REQPKT_RH 0x20 /* request an IN transaction host mode */
697 #define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */
698 #define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */
699 #define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */
700 #define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */
701 
702 /* Bit masks for USB_RXCOUNT */
703 
704 #define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */
705 
706 /* Bit masks for USB_TXTYPE */
707 
708 #define TARGET_EP_NO_T 0xf /* EP number */
709 #define PROTOCOL_T 0xc /* transfer type */
710 
711 /* Bit masks for USB_TXINTERVAL */
712 
713 #define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */
714 
715 /* Bit masks for USB_RXTYPE */
716 
717 #define TARGET_EP_NO_R 0xf /* EP number */
718 #define PROTOCOL_R 0xc /* transfer type */
719 
720 /* Bit masks for USB_RXINTERVAL */
721 
722 #define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */
723 
724 /* Bit masks for USB_DMA_INTERRUPT */
725 
726 #define DMA0_INT 0x1 /* DMA0 pending interrupt */
727 #define DMA1_INT 0x2 /* DMA1 pending interrupt */
728 #define DMA2_INT 0x4 /* DMA2 pending interrupt */
729 #define DMA3_INT 0x8 /* DMA3 pending interrupt */
730 #define DMA4_INT 0x10 /* DMA4 pending interrupt */
731 #define DMA5_INT 0x20 /* DMA5 pending interrupt */
732 #define DMA6_INT 0x40 /* DMA6 pending interrupt */
733 #define DMA7_INT 0x80 /* DMA7 pending interrupt */
734 
735 /* Bit masks for USB_DMAxCONTROL */
736 
737 #define DMA_ENA 0x1 /* DMA enable */
738 #define DIRECTION 0x2 /* direction of DMA transfer */
739 #define MODE 0x4 /* DMA Bus error */
740 #define INT_ENA 0x8 /* Interrupt enable */
741 #define EPNUM 0xf0 /* EP number */
742 #define BUSERROR 0x100 /* DMA Bus error */
743 
744 /* Bit masks for USB_DMAxADDRHIGH */
745 
746 #define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */
747 
748 /* Bit masks for USB_DMAxADDRLOW */
749 
750 #define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */
751 
752 /* Bit masks for USB_DMAxCOUNTHIGH */
753 
754 #define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
755 
756 /* Bit masks for USB_DMAxCOUNTLOW */
757 
758 #define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
759 
760 
761 /* ******************************************* */
762 /* MULTI BIT MACRO ENUMERATIONS */
763 /* ******************************************* */
764 
765 
766 #endif /* _DEF_BF542_H */
Generated on Thu Jan 10 2013 13:04:42 for Linux Kernel by   doxygen 1.8.2