Linux Kernel  3.7.1
 All Data Structures Namespaces Files Functions Variables Typedefs Enumerations Enumerator Macros Groups Pages
iwl-config.h
Go to the documentation of this file.
1 /******************************************************************************
2  *
3  * This file is provided under a dual BSD/GPLv2 license. When using or
4  * redistributing this file, you may do so under either license.
5  *
6  * GPL LICENSE SUMMARY
7  *
8  * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved.
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of version 2 of the GNU General Public License as
12  * published by the Free Software Foundation.
13  *
14  * This program is distributed in the hope that it will be useful, but
15  * WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17  * General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
22  * USA
23  *
24  * The full GNU General Public License is included in this distribution
25  * in the file called LICENSE.GPL.
26  *
27  * Contact Information:
28  * Intel Linux Wireless <[email protected]>
29  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
30  *
31  * BSD LICENSE
32  *
33  * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
34  * All rights reserved.
35  *
36  * Redistribution and use in source and binary forms, with or without
37  * modification, are permitted provided that the following conditions
38  * are met:
39  *
40  * * Redistributions of source code must retain the above copyright
41  * notice, this list of conditions and the following disclaimer.
42  * * Redistributions in binary form must reproduce the above copyright
43  * notice, this list of conditions and the following disclaimer in
44  * the documentation and/or other materials provided with the
45  * distribution.
46  * * Neither the name Intel Corporation nor the names of its
47  * contributors may be used to endorse or promote products derived
48  * from this software without specific prior written permission.
49  *
50  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
51  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
52  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
53  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
54  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
55  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
56  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
57  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
58  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
59  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
60  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
61  *
62  *****************************************************************************/
63 #ifndef __IWL_CONFIG_H__
64 #define __IWL_CONFIG_H__
65 
66 #include <linux/types.h>
67 #include <net/mac80211.h>
68 
69 
86 };
87 
88 /*
89  * LED mode
90  * IWL_LED_DEFAULT: use device default
91  * IWL_LED_RF_STATE: turn LED on/off based on RF state
92  * LED ON = RF ON
93  * LED OFF = RF OFF
94  * IWL_LED_BLINK: adjust led blink rate based on blink table
95  * IWL_LED_DISABLE: led disabled
96  */
102 };
103 
104 /*
105  * This is the threshold value of plcp error rate per 100mSecs. It is
106  * used to set and check for the validity of plcp_delta.
107  */
108 #define IWL_MAX_PLCP_ERR_THRESHOLD_MIN 1
109 #define IWL_MAX_PLCP_ERR_THRESHOLD_DEF 50
110 #define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF 100
111 #define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF 200
112 #define IWL_MAX_PLCP_ERR_THRESHOLD_MAX 255
113 #define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE 0
114 
115 /* TX queue watchdog timeouts in mSecs */
116 #define IWL_WATCHDOG_DISABLED 0
117 #define IWL_DEF_WD_TIMEOUT 2000
118 #define IWL_LONG_WD_TIMEOUT 10000
119 #define IWL_MAX_WD_TIMEOUT 120000
120 
121 /* Antenna presence definitions */
122 #define ANT_NONE 0x0
123 #define ANT_A BIT(0)
124 #define ANT_B BIT(1)
125 #define ANT_C BIT(2)
126 #define ANT_AB (ANT_A | ANT_B)
127 #define ANT_AC (ANT_A | ANT_C)
128 #define ANT_BC (ANT_B | ANT_C)
129 #define ANT_ABC (ANT_A | ANT_B | ANT_C)
130 
131 
132 /*
133  * @max_ll_items: max number of OTP blocks
134  * @shadow_ram_support: shadow support for OTP memory
135  * @led_compensation: compensate on the led on/off time per HW according
136  * to the deviation to achieve the desired led frequency.
137  * The detail algorithm is described in iwl-led.c
138  * @chain_noise_num_beacons: number of beacons used to compute chain noise
139  * @adv_thermal_throttle: support advance thermal throttle
140  * @support_ct_kill_exit: support ct kill exit condition
141  * @plcp_delta_threshold: plcp error rate threshold used to trigger
142  * radio tuning when there is a high receiving plcp error rate
143  * @chain_noise_scale: default chain noise scale used for gain computation
144  * @wd_timeout: TX queues watchdog timeout
145  * @max_event_log_size: size of event log buffer size for ucode event logging
146  * @shadow_reg_enable: HW shadow register support
147  * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up
148  * @no_idle_support: do not support idle mode
149  */
152  int num_of_queues; /* def: HW dependent */
153  /* for iwl_apm_init() */
155 
157  const bool shadow_ram_support;
163  unsigned int wd_timeout;
165  const bool shadow_reg_enable;
166  const bool hd_v2;
167  const bool no_idle_support;
168 };
169 
170 /*
171  * @advanced_bt_coexist: support advanced bt coexist
172  * @bt_init_traffic_load: specify initial bt traffic load
173  * @bt_prio_boost: default bt priority boost value
174  * @agg_time_limit: maximum number of uSec in aggregation
175  * @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode
176  */
184 };
185 
186 /*
187  * @use_rts_for_aggregation: use rts/cts protection for HT traffic
188  * @ht40_bands: bitmap of bands (using %IEEE80211_BAND_*) that support HT40
189  */
192  const bool ht_greenfield_support; /* if used set to true */
195 };
196 
197 /*
198  * information on how to parse the EEPROM
199  */
200 #define EEPROM_REG_BAND_1_CHANNELS 0x08
201 #define EEPROM_REG_BAND_2_CHANNELS 0x26
202 #define EEPROM_REG_BAND_3_CHANNELS 0x42
203 #define EEPROM_REG_BAND_4_CHANNELS 0x5C
204 #define EEPROM_REG_BAND_5_CHANNELS 0x74
205 #define EEPROM_REG_BAND_24_HT40_CHANNELS 0x82
206 #define EEPROM_REG_BAND_52_HT40_CHANNELS 0x92
207 #define EEPROM_6000_REG_BAND_24_HT40_CHANNELS 0x80
208 #define EEPROM_REGULATORY_BAND_NO_HT40 0
209 
213 };
214 
248 struct iwl_cfg {
249  /* params specific to an individual device within a device family */
250  const char *name;
251  const char *fw_name_pre;
252  const unsigned int ucode_api_max;
253  const unsigned int ucode_api_ok;
254  const unsigned int ucode_api_min;
262  /* params not likely to change within a device family */
264  /* params likely to change within a device family */
265  const struct iwl_ht_params *ht_params;
266  const struct iwl_bt_params *bt_params;
268  const bool need_temp_offset_calib; /* if used set to true */
269  const bool no_xtal_calib;
271  const bool adv_pm;
274  const bool temp_offset_v2;
275 };
276 
277 #endif /* __IWL_CONFIG_H__ */