l3.c

Go to the documentation of this file.

/*
 * L3 code
 *
 *  Copyright (C) 2008, Christian Pellegrin <[email protected]>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 *
 * based on:
 *
 * L3 bus algorithm module.
 *
 *  Copyright (C) 2001 Russell King, All Rights Reserved.
 *
 *
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>

#include <sound/l3.h>

/*
 * Send one byte of data to the chip.  Data is latched into the chip on
 * the rising edge of the clock.
 */
static void sendbyte(struct l3_pins *adap, unsigned int byte)
{
    int i;

    for (i = 0; i < 8; i++) {
        adap->setclk(0);
        udelay(adap->data_hold);
        adap->setdat(byte & 1);
        udelay(adap->data_setup);
        adap->setclk(1);
        udelay(adap->clock_high);
        byte >>= 1;
    }
}

/*
 * Send a set of bytes to the chip.  We need to pulse the MODE line
 * between each byte, but never at the start nor at the end of the
 * transfer.
 */
static void sendbytes(struct l3_pins *adap, const u8 *buf,
              int len)
{
    int i;

    for (i = 0; i < len; i++) {
        if (i) {
            udelay(adap->mode_hold);
            adap->setmode(0);
            udelay(adap->mode);
        }
        adap->setmode(1);
        udelay(adap->mode_setup);
        sendbyte(adap, buf[i]);
    }
}

int l3_write(struct l3_pins *adap, u8 addr, u8 *data, int len)
{
    adap->setclk(1);
    adap->setdat(1);
    adap->setmode(1);
    udelay(adap->mode);

    adap->setmode(0);
    udelay(adap->mode_setup);
    sendbyte(adap, addr);
    udelay(adap->mode_hold);

    sendbytes(adap, data, len);

    adap->setclk(1);
    adap->setdat(1);
    adap->setmode(0);

    return len;
}
EXPORT_SYMBOL_GPL(l3_write);

MODULE_DESCRIPTION("L3 bit-banging driver");
MODULE_AUTHOR("Christian Pellegrin <[email protected]>");
MODULE_LICENSE("GPL");