ns87303.h

Go to the documentation of this file.

/* ns87303.h: Configuration Register Description for the
 *            National Semiconductor PC87303 (SuperIO).
 *
 * Copyright (C) 1997  Eddie C. Dost  ([email protected])
 */

#ifndef _SPARC_NS87303_H
#define _SPARC_NS87303_H 1

/*
 * Control Register Index Values
 */
#define FER 0x00
#define FAR 0x01
#define PTR 0x02
#define FCR 0x03
#define PCR 0x04
#define KRR 0x05
#define PMC 0x06
#define TUP 0x07
#define SID 0x08
#define ASC 0x09
#define CS0CF0  0x0a
#define CS0CF1  0x0b
#define CS1CF0  0x0c
#define CS1CF1  0x0d

/* Function Enable Register (FER) bits */
#define FER_EDM     0x10    /* Encoded Drive and Motor pin information   */

/* Function Address Register (FAR) bits */
#define FAR_LPT_MASK    0x03
#define FAR_LPTB    0x00
#define FAR_LPTA    0x01
#define FAR_LPTC    0x02

/* Power and Test Register (PTR) bits */
#define PTR_LPTB_IRQ7   0x08
#define PTR_LEVEL_IRQ   0x80    /* When not ECP/EPP: Use level IRQ           */
#define PTR_LPT_REG_DIR 0x80    /* When ECP/EPP: LPT CTR controls direction */
                /*               of the parallel port        */

/* Function Control Register (FCR) bits */
#define FCR_LDE     0x10    /* Logical Drive Exchange                    */
#define FCR_ZWS_ENA 0x20    /* Enable short host read/write in ECP/EPP   */

/* Printer Control Register (PCR) bits */
#define PCR_EPP_ENABLE  0x01
#define PCR_EPP_IEEE    0x02    /* Enable EPP Version 1.9 (IEEE 1284)        */
#define PCR_ECP_ENABLE  0x04
#define PCR_ECP_CLK_ENA 0x08    /* If 0 ECP Clock is stopped on Power down   */
#define PCR_IRQ_POLAR   0x20    /* If 0 IRQ is level high or negative pulse, */
                /* if 1 polarity is inverted                 */
#define PCR_IRQ_ODRAIN  0x40    /* If 1, IRQ is open drain                   */

/* Tape UARTs and Parallel Port Config Register (TUP) bits */
#define TUP_EPP_TIMO    0x02    /* Enable EPP timeout IRQ                    */

/* Advanced SuperIO Config Register (ASC) bits */
#define ASC_LPT_IRQ7    0x01    /* Always use IRQ7 for LPT                  */
#define ASC_DRV2_SEL    0x02    /* Logical Drive Exchange controlled by TDR  */

#define FER_RESERVED    0x00
#define FAR_RESERVED    0x00
#define PTR_RESERVED    0x73
#define FCR_RESERVED    0xc4
#define PCR_RESERVED    0x10
#define KRR_RESERVED    0x00
#define PMC_RESERVED    0x98
#define TUP_RESERVED    0xfb
#define SIP_RESERVED    0x00
#define ASC_RESERVED    0x18
#define CS0CF0_RESERVED 0x00
#define CS0CF1_RESERVED 0x08
#define CS1CF0_RESERVED 0x00
#define CS1CF1_RESERVED 0x08

#ifdef __KERNEL__

#include <linux/spinlock.h>

#include <asm/io.h>

extern spinlock_t ns87303_lock;

static inline int ns87303_modify(unsigned long port, unsigned int index,
                     unsigned char clr, unsigned char set)
{
    static unsigned char reserved[] = {
        FER_RESERVED, FAR_RESERVED, PTR_RESERVED, FCR_RESERVED,
        PCR_RESERVED, KRR_RESERVED, PMC_RESERVED, TUP_RESERVED,
        SIP_RESERVED, ASC_RESERVED, CS0CF0_RESERVED, CS0CF1_RESERVED,
        CS1CF0_RESERVED, CS1CF1_RESERVED
    };
    unsigned long flags;
    unsigned char value;

    if (index > 0x0d)
        return -EINVAL;

    spin_lock_irqsave(&ns87303_lock, flags);

    outb(index, port);
    value = inb(port + 1);
    value &= ~(reserved[index] | clr);
    value |= set;
    outb(value, port + 1);
    outb(value, port + 1);

    spin_unlock_irqrestore(&ns87303_lock, flags);

    return 0;
}

#endif /* __KERNEL__ */

#endif /* !(_SPARC_NS87303_H) */