pq2.c

Go to the documentation of this file.

/*
 * Common PowerQUICC II code.
 *
 * Author: Scott Wood <[email protected]>
 * Copyright (c) 2007 Freescale Semiconductor
 *
 * Based on code by Vitaly Bordug <[email protected]>
 * pq2_restart fix by Wade Farnsworth <[email protected]>
 * Copyright (c) 2006 MontaVista Software, Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

#include <asm/cpm2.h>
#include <asm/io.h>
#include <asm/pci-bridge.h>

#include <platforms/82xx/pq2.h>

#define RMR_CSRE 0x00000001

void pq2_restart(char *cmd)
{
    local_irq_disable();
    setbits32(&cpm2_immr->im_clkrst.car_rmr, RMR_CSRE);

    /* Clear the ME,EE,IR & DR bits in MSR to cause checkstop */
    mtmsr(mfmsr() & ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR));
    in_8(&cpm2_immr->im_clkrst.res[0]);

    panic("Restart failed\n");
}

#ifdef CONFIG_PCI
static int pq2_pci_exclude_device(struct pci_controller *hose,
                                  u_char bus, u8 devfn)
{
    if (bus == 0 && PCI_SLOT(devfn) == 0)
        return PCIBIOS_DEVICE_NOT_FOUND;
    else
        return PCIBIOS_SUCCESSFUL;
}

static void __init pq2_pci_add_bridge(struct device_node *np)
{
    struct pci_controller *hose;
    struct resource r;

    if (of_address_to_resource(np, 0, &r) || r.end - r.start < 0x10b)
        goto err;

    pci_add_flags(PCI_REASSIGN_ALL_BUS);

    hose = pcibios_alloc_controller(np);
    if (!hose)
        return;

    hose->dn = np;

    setup_indirect_pci(hose, r.start + 0x100, r.start + 0x104, 0);
    pci_process_bridge_OF_ranges(hose, np, 1);

    return;

err:
    printk(KERN_ERR "No valid PCI reg property in device tree\n");
}

void __init pq2_init_pci(void)
{
    struct device_node *np = NULL;

    ppc_md.pci_exclude_device = pq2_pci_exclude_device;

    while ((np = of_find_compatible_node(np, NULL, "fsl,pq2-pci")))
        pq2_pci_add_bridge(np);
}
#endif