rd88f6192-nas-setup.c

Go to the documentation of this file.

/*
 * arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
 *
 * Marvell RD-88F6192-NAS Reference Board Setup
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include <plat/orion-gpio.h>
#include "common.h"

#define RD88F6192_GPIO_USB_VBUS     10

static struct mv643xx_eth_platform_data rd88f6192_ge00_data = {
    .phy_addr   = MV643XX_ETH_PHY_ADDR(8),
};

static struct mv_sata_platform_data rd88f6192_sata_data = {
    .n_ports    = 2,
};

static const struct flash_platform_data rd88F6192_spi_slave_data = {
    .type       = "m25p128",
};

static struct spi_board_info __initdata rd88F6192_spi_slave_info[] = {
    {
        .modalias   = "m25p80",
        .platform_data  = &rd88F6192_spi_slave_data,
        .irq        = -1,
        .max_speed_hz   = 20000000,
        .bus_num    = 0,
        .chip_select    = 0,
    },
};

static void __init rd88f6192_init(void)
{
    /*
     * Basic setup. Needs to be called early.
     */
    kirkwood_init();

    orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1);
    if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 ||
        gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0)
        pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n");

    kirkwood_ehci_init();
    kirkwood_ge00_init(&rd88f6192_ge00_data);
    kirkwood_sata_init(&rd88f6192_sata_data);
    spi_register_board_info(rd88F6192_spi_slave_info,
                ARRAY_SIZE(rd88F6192_spi_slave_info));
    kirkwood_spi_init();
    kirkwood_uart0_init();
}

static int __init rd88f6192_pci_init(void)
{
    if (machine_is_rd88f6192_nas())
        kirkwood_pcie_init(KW_PCIE0);

    return 0;
}
subsys_initcall(rd88f6192_pci_init);

MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
    /* Maintainer: Saeed Bishara <[email protected]> */
    .atag_offset    = 0x100,
    .init_machine   = rd88f6192_init,
    .map_io     = kirkwood_map_io,
    .init_early = kirkwood_init_early,
    .init_irq   = kirkwood_init_irq,
    .timer      = &kirkwood_timer,
    .restart    = kirkwood_restart,
MACHINE_END