Macros
#define	VCR_INTCTRL 0x300 /* Capture interrupt control */

#define	VCR_IC_EAV 0x0001 /* End of active video status */

#define	VCR_IC_EVBI 0x0002 /* End of VBI status */

#define	VCR_IC_FBOTFLD 0x0004 /* "flipping" Bottom field is active */

#define	VCR_IC_ACTBUF 0x0018 /* Active video buffer */

#define	VCR_IC_VSYNC 0x0020 /* 0 = VB, 1 = active video */

#define	VCR_IC_BOTFLD 0x0040 /* Bottom field is active */

#define	VCR_IC_FFULL 0x0080 /* FIFO full */

#define	VCR_IC_INTEN 0x0100 /* End of active video int. enable */

#define	VCR_IC_VBIINT 0x0200 /* End of VBI int enable */

#define	VCR_IC_VBIBUF 0x0400 /* Current VBI buffer */

#define	VCR_TSC 0x308 /* Transport stream control */

#define	VCR_TSC_ENABLE 0x000001 /* Transport stream input enable */

#define	VCR_TSC_DROPERR 0x000002 /* Drop error packets */

#define	VCR_TSC_METHOD 0x00000c /* DMA method (non-functional) */

#define	VCR_TSC_COUNT 0x07fff0 /* KByte or packet count */

#define	VCR_TSC_CBMODE 0x080000 /* Change buffer by byte count */

#define	VCR_TSC_PSSIG 0x100000 /* Packet starting signal disable */

#define	VCR_TSC_BE 0x200000 /* MSB first (serial mode) */

#define	VCR_TSC_SERIAL 0x400000 /* Serial input (0 = parallel) */

#define	VCR_CAPINTC 0x310 /* Capture interface control */

#define	VCR_CI_ENABLE 0x00000001 /* Capture enable */

#define	VCR_CI_BSS 0x00000002 /* WTF "bit stream selection" */

#define	VCR_CI_3BUFS 0x00000004 /* 1 = 3 buffers, 0 = 2 buffers */

#define	VCR_CI_VIPEN 0x00000008 /* VIP enable */

#define	VCR_CI_CCIR601_8 0 /* CCIR601 input stream, 8 bit */

#define	VCR_CI_CCIR656_8 0x00000010 /* ... CCIR656, 8 bit */

#define	VCR_CI_CCIR601_16 0x00000020 /* ... CCIR601, 16 bit */

#define	VCR_CI_CCIR656_16 0x00000030 /* ... CCIR656, 16 bit */

#define	VCR_CI_HDMODE 0x00000040 /* CCIR656-16 hdr decode mode; 1=16b */

#define	VCR_CI_BSWAP 0x00000080 /* Swap bytes (16-bit) */

#define	VCR_CI_YUYV 0 /* Byte order 0123 */

#define	VCR_CI_UYVY 0x00000100 /* Byte order 1032 */

#define	VCR_CI_YVYU 0x00000200 /* Byte order 0321 */

#define	VCR_CI_VYUY 0x00000300 /* Byte order 3012 */

#define	VCR_CI_VIPTYPE 0x00000400 /* VIP type */

#define	VCR_CI_IFSEN 0x00000800 /* Input field signal enable */

#define	VCR_CI_DIODD 0 /* De-interlace odd, 30fps */

#define	VCR_CI_DIEVEN 0x00001000 /* ...even field, 30fps */

#define	VCR_CI_DIBOTH 0x00002000 /* ...both fields, 60fps */

#define	VCR_CI_DIBOTH30 0x00003000 /* ...both fields, 30fps interlace */

#define	VCR_CI_CONVTYPE 0x00004000 /* 4:2:2 to 4:4:4; 1 = interpolate */

#define	VCR_CI_CFC 0x00008000 /* Capture flipping control */

#define	VCR_CI_FILTER

#define	VCR_CI_CLKINV 0x00080000 /* Input CLK inverted */

#define	VCR_CI_VREFINV 0x00100000 /* VREF inverted */

#define	VCR_CI_HREFINV 0x00200000 /* HREF inverted */

#define	VCR_CI_FLDINV 0x00400000 /* Field inverted */

#define	VCR_CI_CLKPIN 0x00800000 /* Capture clock pin */

#define	VCR_CI_THRESH 0x0f000000 /* Capture fifo threshold */

#define	VCR_CI_HRLE 0x10000000 /* Positive edge of HREF */

#define	VCR_CI_VRLE 0x20000000 /* Positive edge of VREF */

#define	VCR_CI_OFLDINV 0x40000000 /* Field output inverted */

#define	VCR_CI_CLKEN 0x80000000 /* Capture clock enable */

#define	VCR_HORRANGE 0x314 /* Active video horizontal range */

#define	VCR_VERTRANGE 0x318 /* Active video vertical range */

#define	VCR_AVSCALE 0x31c /* Active video scaling control */

#define	VCR_AVS_HEN 0x00000800 /* Horizontal scale enable */

#define	VCR_AVS_VEN 0x04000000 /* Vertical enable */

#define	VCR_VBIHOR 0x320 /* VBI Data horizontal range */

#define	VCR_VBIVERT 0x324 /* VBI data vertical range */

#define	VCR_VBIBUF1 0x328 /* First VBI buffer */

#define	VCR_VBISTRIDE 0x32c /* VBI stride */

#define	VCR_ANCDATACNT 0x330 /* Ancillary data count setting */

#define	VCR_MAXDATA 0x334 /* Active data count of active video */

#define	VCR_MAXVBI 0x338 /* Maximum data count of VBI */

#define	VCR_CAPDATA 0x33c /* Capture data count */

#define	VCR_VBUF1 0x340 /* First video buffer */

#define	VCR_VBUF2 0x344 /* Second video buffer */

#define	VCR_VBUF3 0x348 /* Third video buffer */

#define	VCR_VBUF_MASK 0x1ffffff0 /* Bits 28:4 */

#define	VCR_VBIBUF2 0x34c /* Second VBI buffer */

#define	VCR_VSTRIDE 0x350 /* Stride of video + coring control */

#define	VCR_VS_STRIDE_SHIFT 4

#define	VCR_VS_STRIDE 0x00001ff0 /* Stride (8-byte units) */

#define	VCR_VS_CCD 0x007f0000 /* Coring compare data */

#define	VCR_VS_COREEN 0x00800000 /* Coring enable */

#define	VCR_TS0ERR 0x354 /* TS buffer 0 error indicator */

#define	VCR_TS1ERR 0x358 /* TS buffer 0 error indicator */

#define	VCR_TS2ERR 0x35c /* TS buffer 0 error indicator */

Macro Definition Documentation

#define VCR_ANCDATACNT 0x330 /* Ancillary data count setting */

Definition at line 70 of file via-camera.h.

#define VCR_AVS_HEN 0x00000800 /* Horizontal scale enable */

Definition at line 64 of file via-camera.h.

#define VCR_AVS_VEN 0x04000000 /* Vertical enable */

Definition at line 65 of file via-camera.h.

#define VCR_AVSCALE 0x31c /* Active video scaling control */

Definition at line 63 of file via-camera.h.

#define VCR_CAPDATA 0x33c /* Capture data count */

Definition at line 73 of file via-camera.h.

#define VCR_CAPINTC 0x310 /* Capture interface control */

Definition at line 26 of file via-camera.h.

#define VCR_CI_3BUFS 0x00000004 /* 1 = 3 buffers, 0 = 2 buffers */

Definition at line 29 of file via-camera.h.

#define VCR_CI_BSS 0x00000002 /* WTF "bit stream selection" */

Definition at line 28 of file via-camera.h.

#define VCR_CI_BSWAP 0x00000080 /* Swap bytes (16-bit) */

Definition at line 36 of file via-camera.h.

#define VCR_CI_CCIR601_16 0x00000020 /* ... CCIR601, 16 bit */

Definition at line 33 of file via-camera.h.

#define VCR_CI_CCIR601_8 0 /* CCIR601 input stream, 8 bit */

Definition at line 31 of file via-camera.h.

#define VCR_CI_CCIR656_16 0x00000030 /* ... CCIR656, 16 bit */

Definition at line 34 of file via-camera.h.

#define VCR_CI_CCIR656_8 0x00000010 /* ... CCIR656, 8 bit */

Definition at line 32 of file via-camera.h.

#define VCR_CI_CFC 0x00008000 /* Capture flipping control */

Definition at line 48 of file via-camera.h.

#define VCR_CI_CLKEN 0x80000000 /* Capture clock enable */

Definition at line 59 of file via-camera.h.

#define VCR_CI_CLKINV 0x00080000 /* Input CLK inverted */

Definition at line 50 of file via-camera.h.

#define VCR_CI_CLKPIN 0x00800000 /* Capture clock pin */

Definition at line 54 of file via-camera.h.

#define VCR_CI_CONVTYPE 0x00004000 /* 4:2:2 to 4:4:4; 1 = interpolate */

Definition at line 47 of file via-camera.h.

#define VCR_CI_DIBOTH 0x00002000 /* ...both fields, 60fps */

Definition at line 45 of file via-camera.h.

#define VCR_CI_DIBOTH30 0x00003000 /* ...both fields, 30fps interlace */

Definition at line 46 of file via-camera.h.

#define VCR_CI_DIEVEN 0x00001000 /* ...even field, 30fps */

Definition at line 44 of file via-camera.h.

#define VCR_CI_DIODD 0 /* De-interlace odd, 30fps */

Definition at line 43 of file via-camera.h.

#define VCR_CI_ENABLE 0x00000001 /* Capture enable */

Definition at line 27 of file via-camera.h.

#define VCR_CI_FILTER

Value:

0x00070000  /* Horiz filter mode select
                     000 = none
                     001 = 2 tap
                     010 = 3 tap
                     011 = 4 tap
                     100 = 5 tap */

Definition at line 49 of file via-camera.h.

#define VCR_CI_FLDINV 0x00400000 /* Field inverted */

Definition at line 53 of file via-camera.h.

#define VCR_CI_HDMODE 0x00000040 /* CCIR656-16 hdr decode mode; 1=16b */

Definition at line 35 of file via-camera.h.

#define VCR_CI_HREFINV 0x00200000 /* HREF inverted */

Definition at line 52 of file via-camera.h.

#define VCR_CI_HRLE 0x10000000 /* Positive edge of HREF */

Definition at line 56 of file via-camera.h.

#define VCR_CI_IFSEN 0x00000800 /* Input field signal enable */

Definition at line 42 of file via-camera.h.

#define VCR_CI_OFLDINV 0x40000000 /* Field output inverted */

Definition at line 58 of file via-camera.h.

#define VCR_CI_THRESH 0x0f000000 /* Capture fifo threshold */

Definition at line 55 of file via-camera.h.

#define VCR_CI_UYVY 0x00000100 /* Byte order 1032 */

Definition at line 38 of file via-camera.h.

#define VCR_CI_VIPEN 0x00000008 /* VIP enable */

Definition at line 30 of file via-camera.h.

#define VCR_CI_VIPTYPE 0x00000400 /* VIP type */

Definition at line 41 of file via-camera.h.

#define VCR_CI_VREFINV 0x00100000 /* VREF inverted */

Definition at line 51 of file via-camera.h.

#define VCR_CI_VRLE 0x20000000 /* Positive edge of VREF */

Definition at line 57 of file via-camera.h.

#define VCR_CI_VYUY 0x00000300 /* Byte order 3012 */

Definition at line 40 of file via-camera.h.

#define VCR_CI_YUYV 0 /* Byte order 0123 */

Definition at line 37 of file via-camera.h.

#define VCR_CI_YVYU 0x00000200 /* Byte order 0321 */

Definition at line 39 of file via-camera.h.

#define VCR_HORRANGE 0x314 /* Active video horizontal range */

Definition at line 61 of file via-camera.h.

#define VCR_IC_ACTBUF 0x0018 /* Active video buffer */

Definition at line 8 of file via-camera.h.

#define VCR_IC_BOTFLD 0x0040 /* Bottom field is active */

Definition at line 10 of file via-camera.h.

#define VCR_IC_EAV 0x0001 /* End of active video status */

Definition at line 5 of file via-camera.h.

#define VCR_IC_EVBI 0x0002 /* End of VBI status */

Definition at line 6 of file via-camera.h.

#define VCR_IC_FBOTFLD 0x0004 /* "flipping" Bottom field is active */

Definition at line 7 of file via-camera.h.

#define VCR_IC_FFULL 0x0080 /* FIFO full */

Definition at line 11 of file via-camera.h.

#define VCR_IC_INTEN 0x0100 /* End of active video int. enable */

Definition at line 12 of file via-camera.h.

#define VCR_IC_VBIBUF 0x0400 /* Current VBI buffer */

Definition at line 14 of file via-camera.h.

#define VCR_IC_VBIINT 0x0200 /* End of VBI int enable */

Definition at line 13 of file via-camera.h.

#define VCR_IC_VSYNC 0x0020 /* 0 = VB, 1 = active video */

Definition at line 9 of file via-camera.h.

#define VCR_INTCTRL 0x300 /* Capture interrupt control */

Definition at line 4 of file via-camera.h.

#define VCR_MAXDATA 0x334 /* Active data count of active video */

Definition at line 71 of file via-camera.h.

#define VCR_MAXVBI 0x338 /* Maximum data count of VBI */

Definition at line 72 of file via-camera.h.

#define VCR_TS0ERR 0x354 /* TS buffer 0 error indicator */

Definition at line 84 of file via-camera.h.

#define VCR_TS1ERR 0x358 /* TS buffer 0 error indicator */

Definition at line 85 of file via-camera.h.

#define VCR_TS2ERR 0x35c /* TS buffer 0 error indicator */

Definition at line 86 of file via-camera.h.

#define VCR_TSC 0x308 /* Transport stream control */

Definition at line 16 of file via-camera.h.

#define VCR_TSC_BE 0x200000 /* MSB first (serial mode) */

Definition at line 23 of file via-camera.h.

#define VCR_TSC_CBMODE 0x080000 /* Change buffer by byte count */

Definition at line 21 of file via-camera.h.

#define VCR_TSC_COUNT 0x07fff0 /* KByte or packet count */

Definition at line 20 of file via-camera.h.

#define VCR_TSC_DROPERR 0x000002 /* Drop error packets */

Definition at line 18 of file via-camera.h.

#define VCR_TSC_ENABLE 0x000001 /* Transport stream input enable */

Definition at line 17 of file via-camera.h.

#define VCR_TSC_METHOD 0x00000c /* DMA method (non-functional) */

Definition at line 19 of file via-camera.h.

#define VCR_TSC_PSSIG 0x100000 /* Packet starting signal disable */

Definition at line 22 of file via-camera.h.

#define VCR_TSC_SERIAL 0x400000 /* Serial input (0 = parallel) */

Definition at line 24 of file via-camera.h.

#define VCR_VBIBUF1 0x328 /* First VBI buffer */

Definition at line 68 of file via-camera.h.

#define VCR_VBIBUF2 0x34c /* Second VBI buffer */

Definition at line 78 of file via-camera.h.

#define VCR_VBIHOR 0x320 /* VBI Data horizontal range */

Definition at line 66 of file via-camera.h.

#define VCR_VBISTRIDE 0x32c /* VBI stride */

Definition at line 69 of file via-camera.h.

#define VCR_VBIVERT 0x324 /* VBI data vertical range */

Definition at line 67 of file via-camera.h.

#define VCR_VBUF1 0x340 /* First video buffer */

Definition at line 74 of file via-camera.h.

#define VCR_VBUF2 0x344 /* Second video buffer */

Definition at line 75 of file via-camera.h.

#define VCR_VBUF3 0x348 /* Third video buffer */

Definition at line 76 of file via-camera.h.

#define VCR_VBUF_MASK 0x1ffffff0 /* Bits 28:4 */

Definition at line 77 of file via-camera.h.

#define VCR_VERTRANGE 0x318 /* Active video vertical range */

Definition at line 62 of file via-camera.h.

#define VCR_VS_CCD 0x007f0000 /* Coring compare data */

Definition at line 82 of file via-camera.h.

#define VCR_VS_COREEN 0x00800000 /* Coring enable */

Definition at line 83 of file via-camera.h.

#define VCR_VS_STRIDE 0x00001ff0 /* Stride (8-byte units) */

Definition at line 81 of file via-camera.h.

#define VCR_VS_STRIDE_SHIFT 4

Definition at line 80 of file via-camera.h.

#define VCR_VSTRIDE 0x350 /* Stride of video + coring control */

Definition at line 79 of file via-camera.h.

Macros

Macro Definition Documentation