14.5 Localizing DragonFly to Specific Languages

14.5.1.1 Locale Setup

Put the following lines into your ~/.login_conf file:

me:My Account:\
	:charset=KOI8-R:\
	:lang=ru_RU.KOI8-R:

See earlier in this chapter for examples of setting up the locale.

14.5.1.2 Console Setup

• Add the following line to your kernel configuration file:

  options		SC_MOUSE_CHAR=0x03

  Insert the following line into /etc/rc.conf:

  mousechar_start=3

• Use following settings in /etc/rc.conf:

  keymap="ru.koi8-r"
  scrnmap="koi8-r2cp866"
  font8x16="cp866b-8x16"
  font8x14="cp866-8x14"
  font8x8="cp866-8x8"

• For each ttyv* entry in /etc/ttys, use cons25r as the terminal type.

See earlier in this chapter for examples of setting up the console.

14.5.1.3 Printer Setup

Since most printers with Russian characters come with hardware code page CP866, a special output filter is needed to convert from KOI8-R to CP866. Such a filter is installed by default as /usr/libexec/lpr/ru/koi2alt. A Russian printer /etc/printcap entry should look like:

lp|Russian local line printer:\
	:sh:of=/usr/libexec/lpr/ru/koi2alt:\
	:lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs:

See printcap(5) for a detailed description.

14.5.1.4 MS-DOS® FS and Russian Filenames

The following example fstab(5) entry enables support for Russian filenames in mounted MS-DOS® filesystems:

/dev/ad0s2      /dos/c  msdos   rw,-Wkoi2dos,-Lru_RU.KOI8-R 0 0

The option -L selects the locale name used, and -W sets the character conversion table. To use the -W option, be sure to mount /usr before the MS-DOS partition because the conversion tables are located in /usr/libdata/msdosfs. For more informations, see the mount_msdos(8) manual page.

14.5.1.5 X11 Setup

1. Do non-X locale setup first as described.

   Note: The Russian KOI8-R locale may not work with old XFree86™ releases (lower than 3.3). XFree86 4.X is now the default version of the X Window System on DragonFly. This should not be an issue unless you explicitly install an older version of XFree86.

2. Go to the russian/X.language directory and issue the following command:

   # make install

   The above port installs the latest version of the KOI8-R fonts. XFree86 3.3 already has some KOI8-R fonts, but these are scaled better.

   Check the "Files" section in your /etc/XF86Config file. The following lines must be added before any other FontPath entries:

   FontPath   "/usr/X11R6/lib/X11/fonts/cyrillic/misc"
   FontPath   "/usr/X11R6/lib/X11/fonts/cyrillic/75dpi"
   FontPath   "/usr/X11R6/lib/X11/fonts/cyrillic/100dpi"

   If you use a high resolution video mode, swap the 75 dpi and 100 dpi lines.

3. To activate a Russian keyboard, add the following to the "Keyboard" section of your XF86Config file.

   For XFree86 3.X:

   XkbLayout  "ru"
   XkbOptions "grp:caps_toggle"

   For XFree86 4.X:

   Option "XkbLayout"   "ru"
   Option "XkbOptions"  "grp:caps_toggle"

   Also make sure that XkbDisable is turned off (commented out) there.

   The RUS/LAT switch will be CapsLock. The old CapsLock function is still available via Shift+CapsLock (in LAT mode only).

   If you have ``Windows®'' keys on your keyboard, and notice that some non-alphabetical keys are mapped incorrectly in RUS mode, add the following line in your XF86Config file.

   For XFree86 3.X:

   XkbVariant "winkeys"

   For XFree86 4.X:

   Option "XkbVariant" "winkeys"

   Note: The Russian XKB keyboard may not work with old XFree86 versions, see the above note for more information. The Russian XKB keyboard may also not work with non-localized applications as well. Minimally localized applications should call a XtSetLanguageProc (NULL, NULL, NULL); function early in the program. See KOI8-R for X Window for more instructions on localizing X11 applications.