Table of Contents Previous Next
Logo
Client-Side Slice-to-C# Mapping : 14.10 Mapping for Interfaces
Copyright © 2003-2008 ZeroC, Inc.

14.10 Mapping for Interfaces

On the client side, Slice interfaces map to C# interfaces with member functions that correspond to the operations on those interfaces. Consider the following simple interface:
interface Simple {
    void op();
};
The Slice compiler generates the following definition for use by the client:
public interface SimplePrx : Ice.ObjectPrx
{
    void op();
    void op(System.Collections.Generic.Dictionary<string, string>
                __context);
}
As you can see, the compiler generates a proxy interface SimplePrx. In general, the generated name is <interfacename>Prx. If an interface is nested in a module M, the generated interface is part of namespace M, so the fully-qualified name is M.<interfacename>Prx.
In the client’s address space, an instance of SimplePrx is the local ambassador for a remote instance of the Simple interface in a server and is known as a proxy instance. All the details about the server-side object, such as its address, what protocol to use, and its object identity are encapsulated in that instance.
Note that SimplePrx inherits from Ice.ObjectPrx. This reflects the fact that all Ice interfaces implicitly inherit from Ice::Object.
For each operation in the interface, the proxy class has a member function of the same name. For the preceding example, we find that the operation op has been mapped to the method op. Also note that op is overloaded: the second version of op has a parameter __context, which is a dictionary of string pairs. This parameter is for use by the Ice run time to store information about how to deliver a request. You normally do not need to use it. (We examine the __context parameter in detail in Chapter 28. The parameter is also used by IceStorm—see Chapter 41.)
Because all the <interfacename>Prx types are interfaces, you cannot instantiate an object of such a type. Instead, proxy instances are always instantiated on behalf of the client by the Ice run time, so client code never has any need to instantiate a proxy directly.The proxy references handed out by the Ice run time are always of type <interfacename>Prx; the concrete implementation of the interface is part of the Ice run time and does not concern application code.
A value of null denotes the null proxy. The null proxy is a dedicated value that indicates that a proxy points "nowhere" (denotes no object).

14.10.1 The Ice.ObjectPrx Interface

All Ice objects have Object as the ultimate ancestor type, so all proxies inherit from Ice.ObjectPrx. ObjectPrx provides a number of methods:
namespace Ice
{
    public interface ObjectPrx
    {
        Identity ice_getIdentity();
        int ice_hash();
        bool ice_isA(string id);
        string ice_id();
        void ice_ping();

        int GetHashCode();
        bool Equals(object r);

        // Defined in a helper class:
        //
        public static bool Equals(Ice.ObjectPrx lhs,
                                  Ice.ObjectPrx rhs);
        public static bool operator==(ObjectPrx lhs,
                                      ObjectPrx rhs);
        public static bool operator!=(ObjectPrx lhs,
                                      ObjectPrx rhs);

        // ...
    }
}
Note that the static methods are not actually defined Ice.ObjectPrx, but in a helper class that becomes a base class of an instantiated proxy. However, this is simply an internal detail of the C# mapping—conceptually, these methods belong with Ice.ObjectPrx, so we discuss them here.
The methods behave as follows:
• ice_getIdentity
This method returns the identity of the object denoted by the proxy. The identity of an Ice object has the following Slice type:
module Ice {
    struct Identity {
        string name;
        string category;
    };
};
To see whether two proxies denote the same object, first obtain the identity for each object and then compare the identities:
Ice.ObjectPrx o1 = ...;
Ice.ObjectPrx o2 = ...;
Ice.Identity i1 = o1.ice_getIdentity();
Ice.Identity i2 = o2.ice_getIdentity();

if (i1.Equals(i2))
    // o1 and o2 denote the same object
else
    // o1 and o2 denote different objects
• ice_hash
This method returns a hash key for the proxy. (It is a synonym for GetHashCode.)
• ice_isA
This method determines whether the object denoted by the proxy supports a specific interface. The argument to ice_isA is a type ID (see Section 4.13). For example, to see whether a proxy of type ObjectPrx denotes a Printer object, we can write:
Ice.ObjectPrx o = ...;
if (o != null && o.ice_isA("::Printer"))
    // o denotes a Printer object
else
    // o denotes some other type of object
Note that we are testing whether the proxy is null before attempting to invoke the ice_isA method. This avoids getting a NullReferenceException if the proxy is null.
• ice_id
This method returns the type ID of the object denoted by the proxy. Note that the type returned is the type of the actual object, which may be more derived than the static type of the proxy. For example, if we have a proxy of type BasePrx, with a static type ID of ::Base, the return value of ice_id might be ::Base, or it might something more derived, such as ::Derived.
• ice_ping
This method provides a basic reachability test for the object. If the object can physically be contacted (that is, the object exists and its server is running and reachable), the call completes normally; otherwise, it throws an exception that indicates why the object could not be reached, such as ObjectNotExistException or ConnectTimeoutException.
• Equals
This operation compares two proxies for equality. Note that all aspects of proxies are compared by this operation, such as the communication endpoints for the proxy. This means that, in general, if two proxies compare unequal, that does not imply that they denote different objects. For example, if two proxies denote the same Ice object via different transport endpoints, equals returns false even though the proxies denote the same object.
Note that there are other methods in ObjectPrx, not shown here. These methods provide different ways to dispatch a call and also provide access to an object’s facets; we discuss these methods in Chapter 28 and Chapter 30.

14.10.2 Proxy Helpers

For each Slice interface, apart from the proxy interface, the Slice-to-C# compiler creates a helper class: for an interface Simple, the name of the generated helper class is SimplePrxHelper.1 The helper class contains two methods of interest:
public class SimplePrxHelper : Ice.ObjectPrxHelperBase, SimplePrx
{
    public static SimplePrx checkedCast(Ice.ObjectPrx b);
    public static SimplePrx checkedCast(Ice.ObjectPrx b,
                        System.Collections.Generic.Dictionary
                            <string, string> ctx);
    public static SimplePrx uncheckedCast(Ice.ObjectPrx b)

    // ...
}
Both the checkedCast and uncheckedCast methods implement a down-cast: if the passed proxy is a proxy for an object of type Simple, or a proxy for an object with a type derived from Simple, the cast returns a non-null reference to a proxy of type SimplePrx; otherwise, if the passed proxy denotes an object of a different type (or if the passed proxy is null), the cast returns a null reference.
Given a proxy of any type, you can use a checkedCast to determine whether the corresponding object supports a given type, for example:
Ice.ObjectPrx obj = ...;        // Get a proxy from somewhere...

SimplePrx simple = SimplePrxHelper.checkedCast(obj);
if (simple != null)
    // Object supports the Simple interface...
else
    // Object is not of type Simple...
Note that a checkedCast contacts the server. This is necessary because only the implementation of an object in the server has definite knowledge of the type of an object. As a result, a checkedCast may throw a ConnectTimeoutException or an ObjectNotExistException. (This also explains the need for the helper class: the Ice run time must contact the server, so we cannot use a C# down-cast.)
In contrast, an uncheckedCast does not contact the server and unconditionally returns a proxy of the requested type. However, if you do use an uncheckedCast, you must be certain that the proxy really does support the type you are casting to; otherwise, if you get it wrong, you will most likely get a run-time exception when you invoke an operation on the proxy. The most likely error for such a type mismatch is OperationNotExistException. However, other exceptions, such as a marshaling exception are possible as well. And, if the object happens to have an operation with the correct name, but different parameter types, no exception may be reported at all and you simply end up sending the invocation to an object of the wrong type; that object may do rather non-sensical things. To illustrate this, consider the following two interfaces:
interface Process {
    void launch(int stackSize, int dataSize);
};

// ...

interface Rocket {
    void launch(float xCoord, float yCoord);
};
Suppose you expect to receive a proxy for a Process object and use an uncheckedCast to down-cast the proxy:
Ice.ObjectPrx obj = ...;                   // Get proxy...
ProcessPrx process
    = ProcessPrxHelper.uncheckedCast(obj); // No worries...
process.launch(40, 60);                    // Oops...
If the proxy you received actually denotes a Rocket object, the error will go undetected by the Ice run time: because int and float have the same size and because the Ice protocol does not tag data with its type on the wire, the implementation of Rocket::launch will simply misinterpret the passed integers as floating-point numbers.
In fairness, this example is somewhat contrived. For such a mistake to go unnoticed at run time, both objects must have an operation with the same name and, in addition, the run-time arguments passed to the operation must have a total marshaled size that matches the number of bytes that are expected by the unmarshaling code on the server side. In practice, this is extremely rare and an incorrect uncheckedCast typically results in a run-time exception.
A final warning about down-casts: you must use either a checkedCast or an uncheckedCast to down-cast a proxy. If you use a C# cast, the behavior is undefined.

14.10.3 Using Proxy Methods

The base proxy class ObjectPrx supports a variety of methods for customizing a proxy (see Section 28.10). Since proxies are immutable, each of these "factory methods" returns a copy of the original proxy that contains the desired modification. For example, you can obtain a proxy configured with a ten second timeout as shown below:
Ice.ObjectPrx proxy = communicator.stringToProxy(...);
proxy = proxy.ice_timeout(10000);
A factory method returns a new proxy object if the requested modification differs from the current proxy, otherwise it returns the current proxy. With few exceptions, factory methods return a proxy of the same type as the current proxy, therefore it is generally not necessary to repeat a checkedCast or uncheckedCast after using a factory method. However, a regular cast is still required, as shown in the example below:
Ice.ObjectPrx base = communicator.stringToProxy(...);
HelloPrx hello = HelloPrxHelper.checkedCast(base);
hello = (HelloPrx)hello.ice_timeout(10000); # Type is preserved
hello.sayHello();
The only exceptions are the factory methods ice_facet and ice_identity. Calls to either of these methods may produce a proxy for an object of an unrelated type, therefore they return a base proxy that you must subsequently down-cast to an appropriate type.

14.10.4 Object Identity and Proxy Comparison

As mentioned on page 433, proxies provide an Equals operation. Proxy comparison with Equals uses all of the information in a proxy for the comparison. This means that not only the object identity must match for a comparison to succeed, but other details inside the proxy, such as the protocol and endpoint information, must be the same. In other words, comparison with Equals (or == and !=) tests for proxy identity, not object identity. A common mistake is to write code along the following lines:
Ice.ObjectPrx p1 = ...;        // Get a proxy...
Ice.ObjectPrx p2 = ...;        // Get another proxy...

if (p1.Equals(p2)) {
    // p1 and p2 denote different objects       // WRONG!
} else {
    // p1 and p2 denote the same object         // Correct
}
Even though p1 and p2 differ, they may denote the same Ice object. This can happen because, for example, both p1 and p2 embed the same object identity, but each use a different protocol to contact the target object. Similarly, the protocols may be the same, but denote different endpoints (because a single Ice object can be contacted via several different transport endpoints). In other words, if two proxies compare equal with Equals, we know that the two proxies denote the same object (because they are identical in all respects); however, if two proxies compare unequal with Equals, we know absolutely nothing: the proxies may or may not denote the same object.
To compare the object identities of two proxies, you must use a helper function in the Ice.Util class:
public sealed class Util {
    public static int proxyIdentityCompare(ObjectPrx lhs,
                                           ObjectPrx rhs);
    public static int proxyIdentityAndFacetCompare(ObjectPrx lhs,
                                                   ObjectPrx rhs);
// ...
proxyIdentityCompare allows you to correctly compare proxies for identity:
Ice.ObjectPrx p1 = ...;        // Get a proxy...
Ice.ObjectPrx p2 = ...;        // Get another proxy...

if (Ice.Util.proxyIdentityCompare(p1, p2) != 0) {
    // p1 and p2 denote different objects       // Correct
} else {
    // p1 and p2 denote the same object         // Correct
}
The function returns 0 if the identities are equal, 1 if p1 is less than p2, and 1 if p1 is greater than p2. (The comparison uses name as the major and category as the minor sort key.)
The proxyIdentityAndFacetCompare function behaves similarly, but compares both the identity and the facet name (see Chapter 30).
The C# mapping also provides two helper classes in the Ice namespace that allow you to insert proxies into hashtables or ordered collections, based on the identity, or the identity plus the facet name:
public class ProxyIdentityKey
    : System.Collections.IHashCodeProvider,
      System.Collections.IComparer {

    public int GetHashCode(object obj);
    public int Compare(object obj1, object obj2);
}

public class ProxyIdentityFacetKey
    : System.Collections.IHashCodeProvider,
      System.Collections.IComparer {

    public int GetHashCode(object obj);
    public int Compare(object obj1, object obj2);
}
Note these classes derive from IHashCodeProvider and IComparer, so they can be used for both hash tables and ordered collections.

1
You can ignore the ObjectPrxHelperBase base class—it exists for mapping-internal purposes.

Table of Contents Previous Next
Logo