Atom feed of this document
  
 

 Compute node

 

To configure networking:

  1. Configure the first interface as the management interface:

    IP address: 10.0.0.31

    Network mask: 255.255.255.0 (or /24)

    Default gateway: 10.0.0.1

    [Note]Note

    Additional compute nodes should use 10.0.0.32, 10.0.0.33, and so on.

  2. The external interface uses a special configuration without an IP address assigned to it. Configure the second interface as the external interface:

    Replace INTERFACE_NAME with the actual interface name. For example, eth1 or ens224.

    1. Edit the /etc/sysconfig/network-scripts/ifcfg-INTERFACE_NAME file to contain the following:

      Do not change the HWADDR and UUID keys.

      DEVICE=INTERFACE_NAME
      TYPE=Ethernet
      ONBOOT="yes"
      BOOTPROTO="none"
  3. Restart networking:

    # service network restart
 

To configure name resolution:

  • Edit the /etc/hosts file to contain the following:

    # compute1
    10.0.0.31       compute1
    
    # controller
    10.0.0.11       controller
Questions? Discuss on ask.openstack.org
Found an error? Report a bug against this page

loading table of contents...