Qt Reference Documentation
Search index:

stickman.cpp Example File

animation/stickman/stickman.cpp 
 /****************************************************************************
 **
 ** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
 ** All rights reserved.
 ** Contact: Nokia Corporation ([email protected])
 **
 ** This file is part of the QtCore module of the Qt Toolkit.
 **
 ** $QT_BEGIN_LICENSE:BSD$
 ** You may use this file under the terms of the BSD license as follows:
 **
 ** "Redistribution and use in source and binary forms, with or without
 ** modification, are permitted provided that the following conditions are
 ** met:
 **   * Redistributions of source code must retain the above copyright
 **     notice, this list of conditions and the following disclaimer.
 **   * Redistributions in binary form must reproduce the above copyright
 **     notice, this list of conditions and the following disclaimer in
 **     the documentation and/or other materials provided with the
 **     distribution.
 **   * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor
 **     the names of its contributors may be used to endorse or promote
 **     products derived from this software without specific prior written
 **     permission.
 **
 ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/

 #include "stickman.h"
 #include "node.h"

 #include <QPainter>
 #include <QTimer>

 #define _USE_MATH_DEFINES
 #include <math.h>

 #ifndef M_PI
 #define M_PI 3.14159265358979323846
 #endif

 static const qreal Coords[NodeCount * 2] = {
     0.0, -150.0, // head, #0

     0.0, -100.0, // body pentagon, top->bottom, left->right, #1 - 5
     -50.0, -50.0,
     50.0, -50.0,
     -25.0, 50.0,
     25.0, 50.0,

     -100.0, 0.0, // right arm, #6 - 7
     -125.0, 50.0,

     100.0, 0.0, // left arm, #8 - 9
     125.0, 50.0,

     -35.0, 75.0, // lower body, #10 - 11
     35.0, 75.0,

     -25.0, 200.0, // right leg, #12 - 13
     -30.0, 300.0,

     25.0, 200.0, // left leg, #14 - 15
     30.0, 300.0

 };

 static const int Bones[BoneCount * 2] = {
     0, 1, // neck

     1, 2, // body
     1, 3,
     1, 4,
     1, 5,
     2, 3,
     2, 4,
     2, 5,
     3, 4,
     3, 5,
     4, 5,

     2, 6, // right arm
     6, 7,

     3, 8, // left arm
     8, 9,

     4, 10, // lower body
     4, 11,
     5, 10,
     5, 11,
     10, 11,

     10, 12, // right leg
     12, 13,

     11, 14, // left leg
     14, 15

 };

 StickMan::StickMan()
 {
     m_sticks = true;
     m_isDead = false;
     m_pixmap = QPixmap("images/head.png");
     m_penColor = Qt::white;
     m_fillColor = Qt::black;

     // Set up start position of limbs
     for (int i=0; i<NodeCount; ++i) {
         m_nodes[i] = new Node(QPointF(Coords[i * 2], Coords[i * 2 + 1]), this);
         connect(m_nodes[i], SIGNAL(positionChanged()), this, SLOT(childPositionChanged()));
     }

     for (int i=0; i<BoneCount; ++i) {
         int n1 = Bones[i * 2];
         int n2 = Bones[i * 2 + 1];

         Node *node1 = m_nodes[n1];
         Node *node2 = m_nodes[n2];

         QPointF dist = node1->pos() - node2->pos();
         m_perfectBoneLengths[i] = sqrt(pow(dist.x(),2) + pow(dist.y(),2));
     }

     startTimer(10);
 }

 StickMan::~StickMan()
 {
 }

 void StickMan::childPositionChanged()
 {
     prepareGeometryChange();
 }

 void StickMan::setDrawSticks(bool on)
 {
     m_sticks = on;
     for (int i=0;i<nodeCount();++i) {
         Node *node = m_nodes[i];
         node->setVisible(on);
     }
 }

 QRectF StickMan::boundingRect() const
 {
     // account for head radius=50.0 plus pen which is 5.0
     return childrenBoundingRect().adjusted(-55.0, -55.0, 55.0, 55.0);
 }

 int StickMan::nodeCount() const
 {
     return NodeCount;
 }

 Node *StickMan::node(int idx) const
 {
     if (idx >= 0 && idx < NodeCount)
         return m_nodes[idx];
     else
         return 0;
 }

 void StickMan::timerEvent(QTimerEvent *)
 {
     update();
 }

 void StickMan::stabilize()
 {
     static const qreal threshold = 0.001;

     for (int i=0; i<BoneCount; ++i) {
         int n1 = Bones[i * 2];
         int n2 = Bones[i * 2 + 1];

         Node *node1 = m_nodes[n1];
         Node *node2 = m_nodes[n2];

         QPointF pos1 = node1->pos();
         QPointF pos2 = node2->pos();

         QPointF dist = pos1 - pos2;
         qreal length = sqrt(pow(dist.x(),2) + pow(dist.y(),2));
         qreal diff = (length - m_perfectBoneLengths[i]) / length;

         QPointF p = dist * (0.5 * diff);
         if (p.x() > threshold && p.y() > threshold) {
             pos1 -= p;
             pos2 += p;

             node1->setPos(pos1);
             node2->setPos(pos2);
         }
     }
 }

 QPointF StickMan::posFor(int idx) const
 {
     return m_nodes[idx]->pos();
 }

 //#include <QTime>
 void StickMan::paint(QPainter *painter, const QStyleOptionGraphicsItem *, QWidget *)
 {
   /*  static int frames = 0;
     static QTime time;
     if (frames++ % 100 == 0) {
         frames = 1;
         time.restart();
     }

     if (time.elapsed() > 0) {
         painter->setPen(Qt::white);
         painter->drawText(0, 0, QString::number(frames / (time.elapsed() / 1000.0)));
     }*/

     stabilize();
     if (m_sticks) {
         painter->setPen(Qt::white);
         for (int i=0; i<BoneCount; ++i) {
             int n1 = Bones[i * 2];
             int n2 = Bones[i * 2 + 1];

             Node *node1 = m_nodes[n1];
             Node *node2 = m_nodes[n2];

             painter->drawLine(node1->pos(), node2->pos());
         }
     } else {
         // first bone is neck and will be used for head

         QPainterPath path;
         path.moveTo(posFor(0));
         path.lineTo(posFor(1));

         // right arm
         path.lineTo(posFor(2));
         path.lineTo(posFor(6));
         path.lineTo(posFor(7));

         // left arm
         path.moveTo(posFor(3));
         path.lineTo(posFor(8));
         path.lineTo(posFor(9));

         // body
         path.moveTo(posFor(2));
         path.lineTo(posFor(4));
         path.lineTo(posFor(10));
         path.lineTo(posFor(11));
         path.lineTo(posFor(5));
         path.lineTo(posFor(3));
         path.lineTo(posFor(1));

         // right leg
         path.moveTo(posFor(10));
         path.lineTo(posFor(12));
         path.lineTo(posFor(13));

         // left leg
         path.moveTo(posFor(11));
         path.lineTo(posFor(14));
         path.lineTo(posFor(15));

         painter->setPen(QPen(m_penColor, 5.0, Qt::SolidLine, Qt::RoundCap));
         painter->drawPath(path);

         {
             int n1 = Bones[0];
             int n2 = Bones[1];
             Node *node1 = m_nodes[n1];
             Node *node2 = m_nodes[n2];

             QPointF dist = node2->pos() - node1->pos();

             qreal sinAngle = dist.x() / sqrt(pow(dist.x(), 2) + pow(dist.y(), 2));
             qreal angle = asin(sinAngle) * 180.0 / M_PI;

             QPointF headPos = node1->pos();
             painter->translate(headPos);
             painter->rotate(-angle);

             painter->setBrush(m_fillColor);
             painter->drawEllipse(QPointF(0,0), 50.0, 50.0);

             painter->setBrush(m_penColor);
             painter->setPen(QPen(m_penColor, 2.5, Qt::SolidLine, Qt::RoundCap));

             // eyes
             if (m_isDead) {
                 painter->drawLine(-30.0, -30.0, -20.0, -20.0);
                 painter->drawLine(-20.0, -30.0, -30.0, -20.0);

                 painter->drawLine(20.0, -30.0, 30.0, -20.0);
                 painter->drawLine(30.0, -30.0, 20.0, -20.0);
             } else {
                 painter->drawChord(QRectF(-30.0, -30.0, 25.0, 70.0), 30.0*16, 120.0*16);
                 painter->drawChord(QRectF(5.0, -30.0, 25.0, 70.0), 30.0*16, 120.0*16);
             }

             // mouth
             if (m_isDead) {
                 painter->drawLine(-28.0, 2.0, 29.0, 2.0);
             } else {
                 painter->setBrush(QColor(128, 0, 64 ));
                 painter->drawChord(QRectF(-28.0, 2.0-55.0/2.0, 57.0, 55.0), 0.0, -180.0*16);
             }

             // pupils
             if (!m_isDead) {
                 painter->setPen(QPen(m_fillColor, 1.0, Qt::SolidLine, Qt::RoundCap));
                 painter->setBrush(m_fillColor);
                 painter->drawEllipse(QPointF(-12.0, -25.0), 5.0, 5.0);
                 painter->drawEllipse(QPointF(22.0, -25.0), 5.0, 5.0);
             }
         }
     }
 }

© 2008-2010 Nokia Corporation and/or its subsidiaries. Nokia, Qt and their respective logos are trademarks of Nokia Corporation in Finland and/or other countries worldwide.

All other trademarks are property of their respective owners. Privacy Policy


Licensees holding valid Qt Commercial licenses may use this document in accordance with the Qt Commercial License Agreement provided with the Software or, alternatively, in accordance with the terms contained in a written agreement between you and Nokia.

Alternatively, this document may be used under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation.

X

Thank you for giving your feedback.

Make sure it is related to this specific page. For more general bugs and requests, please use the Qt Bug Tracker.