Qt Reference Documentation

QSize Class Reference

The QSize class defines the size of a two-dimensional object using integer point precision. More...

 #include <QSize>

Public Functions

QSize ()
QSize ( int width, int height )
QSize boundedTo ( const QSize & otherSize ) const
QSize expandedTo ( const QSize & otherSize ) const
int height () const
bool isEmpty () const
bool isNull () const
bool isValid () const
int & rheight ()
int & rwidth ()
void scale ( int width, int height, Qt::AspectRatioMode mode )
void scale ( const QSize & size, Qt::AspectRatioMode mode )
void setHeight ( int height )
void setWidth ( int width )
void transpose ()
int width () const
QSize & operator*= ( qreal factor )
QSize & operator+= ( const QSize & size )
QSize & operator-= ( const QSize & size )
QSize & operator/= ( qreal divisor )

Related Non-Members

bool operator!= ( const QSize & s1, const QSize & s2 )
const QSize operator* ( qreal factor, const QSize & size )
const QSize operator* ( const QSize & size, qreal factor )
const QSize operator+ ( const QSize & s1, const QSize & s2 )
const QSize operator- ( const QSize & s1, const QSize & s2 )
const QSize operator/ ( const QSize & size, qreal divisor )
QDataStream & operator<< ( QDataStream & stream, const QSize & size )
bool operator== ( const QSize & s1, const QSize & s2 )
QDataStream & operator>> ( QDataStream & stream, QSize & size )

Detailed Description

The QSize class defines the size of a two-dimensional object using integer point precision.

A size is specified by a width() and a height(). It can be set in the constructor and changed using the setWidth(), setHeight(), or scale() functions, or using arithmetic operators. A size can also be manipulated directly by retrieving references to the width and height using the rwidth() and rheight() functions. Finally, the width and height can be swapped using the transpose() function.

The isValid() function determines if a size is valid (a valid size has both width and height greater than zero). The isEmpty() function returns true if either of the width and height is less than, or equal to, zero, while the isNull() function returns true only if both the width and the height is zero.

Use the expandedTo() function to retrieve a size which holds the maximum height and width of this size and a given size. Similarly, the boundedTo() function returns a size which holds the minimum height and width of this size and a given size.

QSize objects can be streamed as well as compared.

See also QSizeF, QPoint, and QRect.

Member Function Documentation

QSize::QSize ()

Constructs a size with an invalid width and height (i.e., isValid() returns false).

See also isValid().

QSize::QSize ( int width, int height )

Constructs a size with the given width and height.

See also setWidth() and setHeight().

QSize QSize::boundedTo ( const QSize & otherSize ) const

Returns a size holding the minimum width and height of this size and the given otherSize.

See also expandedTo() and scale().

QSize QSize::expandedTo ( const QSize & otherSize ) const

Returns a size holding the maximum width and height of this size and the given otherSize.

See also boundedTo() and scale().

int QSize::height () const

Returns the height.

See also width() and setHeight().

bool QSize::isEmpty () const

Returns true if either of the width and height is less than or equal to 0; otherwise returns false.

See also isNull() and isValid().

bool QSize::isNull () const

Returns true if both the width and height is 0; otherwise returns false.

See also isValid() and isEmpty().

bool QSize::isValid () const

Returns true if both the width and height is equal to or greater than 0; otherwise returns false.

See also isNull() and isEmpty().

int & QSize::rheight ()

Returns a reference to the height.

Using a reference makes it possible to manipulate the height directly. For example:

 QSize size(100, 10);
 size.rheight() += 5;

 // size becomes (100,15)

See also rwidth() and setHeight().

int & QSize::rwidth ()

Returns a reference to the width.

Using a reference makes it possible to manipulate the width directly. For example:

 QSize size(100, 10);
 size.rwidth() += 20;

 // size becomes (120,10)

See also rheight() and setWidth().

void QSize::scale ( int width, int height, Qt::AspectRatioMode mode )

Scales the size to a rectangle with the given width and height, according to the specified mode:

  • If mode is Qt::IgnoreAspectRatio, the size is set to (width, height).
  • If mode is Qt::KeepAspectRatio, the current size is scaled to a rectangle as large as possible inside (width, height), preserving the aspect ratio.
  • If mode is Qt::KeepAspectRatioByExpanding, the current size is scaled to a rectangle as small as possible outside (width, height), preserving the aspect ratio.

Example:

 QSize t1(10, 12);
 t1.scale(60, 60, Qt::IgnoreAspectRatio);
 // t1 is (60, 60)

 QSize t2(10, 12);
 t2.scale(60, 60, Qt::KeepAspectRatio);
 // t2 is (50, 60)

 QSize t3(10, 12);
 t3.scale(60, 60, Qt::KeepAspectRatioByExpanding);
 // t3 is (60, 72)

See also setWidth() and setHeight().

void QSize::scale ( const QSize & size, Qt::AspectRatioMode mode )

This is an overloaded function.

Scales the size to a rectangle with the given size, according to the specified mode.

void QSize::setHeight ( int height )

Sets the height to the given height.

See also rheight(), height(), and setWidth().

void QSize::setWidth ( int width )

Sets the width to the given width.

See also rwidth(), width(), and setHeight().

void QSize::transpose ()

Swaps the width and height values.

See also setWidth() and setHeight().

int QSize::width () const

Returns the width.

See also height() and setWidth().

QSize & QSize::operator*= ( qreal factor )

This is an overloaded function.

Multiplies both the width and height by the given factor, and returns a reference to the size.

Note that the result is rounded to the nearest integer.

See also scale().

QSize & QSize::operator+= ( const QSize & size )

Adds the given size to this size, and returns a reference to this size. For example:

 QSize s( 3, 7);
 QSize r(-1, 4);
 s += r;

 // s becomes (2,11)

QSize & QSize::operator-= ( const QSize & size )

Subtracts the given size from this size, and returns a reference to this size. For example:

 QSize s( 3, 7);
 QSize r(-1, 4);
 s -= r;

 // s becomes (4,3)

QSize & QSize::operator/= ( qreal divisor )

This is an overloaded function.

Divides both the width and height by the given divisor, and returns a reference to the size.

Note that the result is rounded to the nearest integer.

See also QSize::scale().

Related Non-Members

bool operator!= ( const QSize & s1, const QSize & s2 )

Returns true if s1 and s2 are different; otherwise returns false.

const QSize operator* ( qreal factor, const QSize & size )

This is an overloaded function.

Multiplies the given size by the given factor, and returns the result rounded to the nearest integer.

const QSize operator* ( const QSize & size, qreal factor )

Multiplies the given size by the given factor, and returns the result rounded to the nearest integer.

See also QSize::scale().

const QSize operator+ ( const QSize & s1, const QSize & s2 )

Returns the sum of s1 and s2; each component is added separately.

const QSize operator- ( const QSize & s1, const QSize & s2 )

Returns s2 subtracted from s1; each component is subtracted separately.

const QSize operator/ ( const QSize & size, qreal divisor )

This is an overloaded function.

Divides the given size by the given divisor, and returns the result rounded to the nearest integer.

See also QSize::scale().

QDataStream & operator<< ( QDataStream & stream, const QSize & size )

Writes the given size to the given stream, and returns a reference to the stream.

See also Serializing Qt Data Types.

bool operator== ( const QSize & s1, const QSize & s2 )

Returns true if s1 and s2 are equal; otherwise returns false.

QDataStream & operator>> ( QDataStream & stream, QSize & size )

Reads a size from the given stream into the given size, and returns a reference to the stream.

See also Serializing Qt Data Types.

X

Thank you for giving your feedback.

Make sure it is related to this specific page. For more general bugs and requests, please use the Qt Bug Tracker.