»
Symbian OS v9.3 »
Symbian OS reference »
C++ component reference »
Base E32_EKA2 »
CArrayPak
class CArrayPak : public CArrayPakBase;
Description
A thin templated base class for variable length, packed, arrays.
The public functions provide standard array behaviour.
The class is always derived from and is never instantiated explicitly.
Derivation
CBase
- Base class for all classes to be instantiated on the heap
CArrayPakBase
- An implementation base class for all variable length, packed arrays
CArrayPak
- A thin templated base class for variable length, packed, arrays
Members
Defined in CArrayPak
:
AppendL()
, Array()
, At()
, At()
, ExpandL()
, ExtendL()
, Find()
, FindIsq()
, InsertIsqAllowDuplicatesL()
, InsertIsqL()
, InsertL()
, operator[]()
, operator[]()
Inherited from CArrayPakBase
:
Compress()
,
Count()
,
Delete()
,
Length()
,
Reset()
,
SortL()
Inherited from CBase
:
Extension_()
,
operator new()
Member functions
inline const T &operator[](TInt anIndex) const;
Description
Gets a reference to the element located at the specified position within the array.
The compiler uses this variant of the function when the returned reference is used in an expression where it cannot be modified.
Parameters
TInt anIndex |
The position of the element within the array. The position is relative to zero; i.e. zero implies the first element in the
array.
|
|
Return value
const T & |
A const reference to the element located at position anIndex within the array.
|
|
Panic codes
E32USER-CBase |
21, if anIndex is negative or greater than or equal to number of objects currently within the array.
|
|
inline T &operator[](TInt anIndex);
Description
Gets a reference to the element located at the specified position within the array.
The compiler uses this variant of the function when the returned reference is used in an expression where it can be modified.
Parameters
TInt anIndex |
The position of the element within the array. The position is relative to zero; i.e. zero implies the first element in the
array.
|
|
Return value
T & |
A non-const reference to the element located at position anIndex within the array.
|
|
Panic codes
E32USER-CBase |
21, if anIndex is negative or greater than or equal to number of objects currently within the array.
|
|
inline const T &At(TInt anIndex) const;
Description
Gets a reference to the element located at the specified position within the array.
The compiler uses this variant of the function when the returned reference is used in an expression where it cannot be modified.
Parameters
TInt anIndex |
The position of the element within the array. The position is relative to zero; i.e. zero implies the first element in the
array.
|
|
Return value
const T & |
A const reference to the element located at position anIndex within the array.
|
|
Panic codes
E32USER-CBase |
21, if anIndex is negative or greater than or equal to number of objects currently within the array.
|
|
inline T &At(TInt anIndex);
Description
Gets a reference to the element located at the specified position within the array.
The compiler uses this variant of the function when the returned reference is used in an expression where it can be modified.
Parameters
TInt anIndex |
The position of the element within the array. The position is relative to zero; i.e. zero implies the first element in the
array.
|
|
Return value
T & |
A non-const reference to the element located at position anIndex within the array.
|
|
Panic codes
E32USER-CBase |
21, if anIndex is negative or greater than or equal to number of objects currently within the array.
|
|
inline void AppendL(const T &aRef, TInt aLength);
Description
Appends an element of a specified length onto the array.
Parameters
const T &aRef |
A reference to the class T element to be appended.
|
TInt aLength |
The length of the element to be appended.
|
|
Leave codes
KErrNoMemory |
The function attempted to allocate from the heap and there is insufficient memory available. In this case, the array is left
in the state it was in before the call.
|
|
Panic codes
E32USER-CBase |
30, if aLength is negative.
|
|
inline T &ExpandL(TInt anIndex, TInt aLength);
Description
Expands the array by one element of specified length at the specified position.
It:
1. expands the array by one element at the specified position.
2. constructs a new element of specified length at that position.
3. returns a reference to the new element.
All existing elements from position anIndex to the end of the array are moved up, so that the element originally at position
anIndex is now at position anIndex + 1 etc.
The new element of type <class T> and length aLength is constructed at position anIndex, using the default constructor of
that class.
Parameters
TInt anIndex |
The position within the array where the array is to be expanded and the new <class T> object is to be constructed.
|
TInt aLength |
The length of the new element.
|
|
Return value
T & |
A reference to the newly constructed <class T> object at position anIndex within the array.
|
|
Leave codes
KErrNoMemory |
The function attempted to allocate from the heap and there is insufficient memory available. In this case, the array is left
in the state it was in before the call.
|
|
Panic codes
E32USER-CBase |
21, if anIndex is negative or greater than the number of elements currently in the array.
|
E32USER-CBase |
30, if aLength is negative.
|
|
inline T &ExtendL(TInt aLength);
Description
Expands the array by one element of specified length at the end of the array.
It:
1. expands the array by one element at the end of the array, i.e. at position CArrayPakbase::Count().
2. constructs a new element of length aLength at that position.
3. returns a reference to the new element.
The new element of type <class T> is constructed at the end of the array, using the default constructor of that class.
Parameters
TInt aLength |
The length of the new element.
|
|
Return value
T & |
A reference to the newly constructed <class T> object at the end of the array.
|
|
Leave codes
KErrNoMemory |
The function attempted to allocate from the heap and there is insufficient memory available. In this case, the array is left
in the state it was in before the call.
|
|
Panic codes
E32USER-CBase |
30, if aLength is negative.
|
|
inline TInt Find(const T &aRef, TKeyArrayPak &aKey, TInt &anIndex) const;
Description
Finds the position of an element within the array, based on the matching of keys, using a sequential search.
The array is searched sequentially for an element whose key matches the key of the supplied <class T> object. The search starts
with the first element in the array.
Note that where an array has elements with duplicate keys, the function only supplies the position of the first element in
the array with that key.
Parameters
const T &aRef |
A reference to an object of type <class T> whose key is used for comparison.
|
TKeyArrayPak &aKey |
A reference to a key object defining the properties of the key.
|
TInt &anIndex |
A reference to a TInt supplied by the caller. On return, if the element is found, this is set to the position of that element
within the array. The position is relative to zero, (i.e. the first element in the array is at position 0). If the element
is not found or the array is empty, then this is undefined.
|
|
Return value
TInt
|
Zero, if the element with the specified key is found. Non-zero, if the element with the specified key is not found.
|
|
inline TInt FindIsq(const T &aRef, TKeyArrayPak &aKey, TInt &anIndex) const;
Description
Finds the position of an element within the array, based on the matching of keys, using a binary search technique.
The array is searched, using a binary search technique, for an element whose key matches the key of the supplied <class T>
object.
The array must be in key order.
Note that where an array has elements with duplicate keys, the function cannot guarantee which element, with the given key
value, it will return, except that it will find one of them.
Parameters
const T &aRef |
A reference to an object of type <class T> whose key is used for comparison.
|
TKeyArrayPak &aKey |
A reference to a key object defining the properties of the key.
|
TInt &anIndex |
A reference to a TInt supplied by the caller. On return, if the element is found, this is set to the position of that element
within the array. The position is relative to zero, (i.e. the first element in the array is at position 0). If the element
is not found and the array is not empty, then this is set to the position of the first element in the array with a key which
is greater than the key of the object aRef. If the element is not found and the array is empty, then this is undefined.
|
|
Return value
TInt
|
Zero, if the element with the specified key is found or the array is empty. Non-zero, if the element with the specified key
is not found.
|
|
inline void InsertL(TInt anIndex, const T &aRef, TInt aLength);
Description
Inserts an element of a specified length into the array at the specified position.
Parameters
TInt anIndex |
The position within the array where the element is to be inserted. The position is relative to zero, i.e. zero implies that
elements are inserted at the beginning of the array.
|
const T &aRef |
A reference to the class T object to be inserted into the array.
|
TInt aLength |
The length of the element to be inserted into the array.
|
|
Leave codes
KErrNoMemory |
The function attempted to expand the array buffer and there is insufficient memory available. In this case, the array is left
in the state it was in before the call.
|
|
Panic codes
E32USER-CBase |
21, if anIndex is negative or greater than the number of objects currently in the array.
|
E32USER-CBase |
30, if aLength is negative.
|
|
inline TInt InsertIsqL(const T &aRef, TInt aLength, TKeyArrayPak &aKey);
Description
Inserts a single element of a specified length into the array at a position determined by a key.
The array MUST already be in key sequence (as defined by the key), otherwise the position of the new element is unpredictable,
or duplicates may occur.
Elements with duplicate keys are not permitted.
Parameters
const T &aRef |
A reference to the element of type <class T> to be inserted into the array.
|
TInt aLength |
The length of the new element of type <class T> to be inserted into the array.
|
TKeyArrayPak &aKey |
A reference to a key object defining the properties of the key.
|
|
Return value
TInt
|
The position within the array of the newly inserted element.
|
|
Leave codes
KErrAlreadyExists |
An element with the same key already exists within the array. NB the array MUST already be in key sequence, otherwise the
function may insert a duplicate and fail to leave with this value.
|
KErrNoMemory |
The function attempted to expand the array buffer and there is insufficient memory available. In this case, the array is left
in the state it was in before the call.
|
|
InsertIsqAllowDuplicatesL()
inline TInt InsertIsqAllowDuplicatesL(const T &aRef, TInt aLength, TKeyArrayPak &aKey);
Description
Inserts a single element of a specified length into the array at a position determined by a key, allowing duplicates.
The array MUST already be in key sequence, otherwise the position of the new element is unpredictable.
Elements with duplicate keys are permitted. If the new element's key is a duplicate of an existing element's key, then the
new element is positioned after the existing element.
Parameters
const T &aRef |
A reference to the element of type <class T> to be inserted into the array.
|
TInt aLength |
The length of the new element to be inserted into the array.
|
TKeyArrayPak &aKey |
A reference to a key object defining the properties of the key.
|
|
Return value
TInt
|
The position within the array of the newly inserted element.
|
|
Leave codes
KErrNoMemory |
The function attempted to expand the array buffer and there is insufficient memory available. In this case, the array is left
in the state it was in before the call.
|
|
inline const TArray< T > Array() const;
Description
Constructs and returns a TArray<T> object.
Return value
const TArray < T > |
A Tarray<T> object for this array.
|
|