Symbian
Symbian OS Library

SYMBIAN OS V9.3

[Index] [Spacer] [Previous] [Next]



Location: f32file.h
Link against: efsrv.lib

Class CFileMan

class CFileMan : public CFileBase;

Description

Offers file management services which accept the use of wildcards; synchronous and asynchronous.

It also provides enquiry functions, which, like those provided by the base class CFileBase, may be used by an observer class object to provide the user with information about the progress of the operation.

All of the file management functions provided by this class accept the use of wildcards, and may operate either synchronously or asynchronously. When CFileMan is operating asynchronously, the operation takes place in a separate thread from the calling code.

A file notification observer (an instance of a class deriving from MFileManObserver) may optionally be used by CFileMan when operating synchronously or asynchronously. If provided, the appropriate notification function is called before or after each entry has been processed, or during a file copy or move. This notification can be used to provide information about the state of the operation, such as the number of bytes transferred during a large-scale file copy. It can also be used to allow the user to cancel, retry or continue processing an entry, or to abort the whole operation. If such notification is required, specify an object deriving from MFileManObserver class in the constructor, or call SetObserver(), defined in the base class, CFileBase.

All of the file manipulation functions except Rename() may operate recursively, and all can operate non-recursively. When operating recursively, these functions will act on all matching files located throughout the source directory’s hierarchy. When operating non-recursively, these functions act upon files contained in the single top level source directory only. Recursion is set or unset using the switch parameter to these functions.

This class is not intended for user derivation.

Derivation

Members

Defined in CFileMan:
Attribs(), Attribs(), BytesTransferredByCopyStep(), CompleteOperationL(), Copy(), Copy(), Copy(), Copy(), CurrentAction(), Delete(), Delete(), DoOperationL(), EAttribs, ECopy, ECopyFromHandle, EDelete, EMove, ENone, EOverWrite, ERecurse, ERename, ERenameInvalidEntry, ERmDir, GetCurrentSource(), GetCurrentTarget(), Move(), Move(), NewL(), NewL(), Rename(), Rename(), RmDir(), RmDir(), TAction, TSwitch

Inherited from CBase:
Extension_(), operator new()

Inherited from CFileBase:
AbbreviatedPath(), ConstructL(), CurrentEntry(), FullPath(), GetLastError(), GetMoreInfoAboutError(), RunInSeparateThreadL(), RunL(), SetObserver(), iCurrentEntry, iDirList, iErrorInfo, iFManThread, iFs, iFsOld, iLastError, iMatchEntry, iNumberOfFilesProcessed, iObserver, iScanner, iSessionPath, iSrcFile, iStatus, iSwitches, iSynchronizer

See also:


Construction and destruction


NewL()

static IMPORT_C CFileMan *NewL(RFs &aFs);

Description

Constructs and allocates memory for a new CFileMan object.

Parameters

RFs &aFs

File server session.

Return value

CFileMan *

Newly created CFileMan object.


NewL()

static IMPORT_C CFileMan *NewL(RFs &aFs, MFileManObserver *anObserver);

Description

Constructs and allocates memory for a new CFileMan object with an observer.

Parameters

RFs &aFs

File server session.

MFileManObserver *anObserver

File management observer.

Return value

CFileMan *

Newly created CFileMan object.

[Top]


Member functions


CurrentAction()

IMPORT_C TAction CurrentAction();

Description

Gets the action which CFileMan is currently carrying out.

Return value

TAction

The action which CFileMan is carrying out.


GetCurrentTarget()

IMPORT_C void GetCurrentTarget(TFileName &aFile);

Description

Gets the name of the target file for the CFileMan operation currently being carried out.

This function is relevant when copying, moving or renaming files.

Parameters

TFileName &aFile

The full path and filename of the target file for the current CFileMan operation


GetCurrentSource()

IMPORT_C void GetCurrentSource(TFileName &aFile);

Description

Gets the name of the source file or directory for the CFileMan operation currently being carried out.

The source is the file or directory which is being copied, moved or deleted.

Parameters

TFileName &aFile

The full path and filename of the source file for the current CFileMan operation.


BytesTransferredByCopyStep()

IMPORT_C TInt BytesTransferredByCopyStep();

Description

Gets the number of bytes transferred during a copy or move operation.

Large files are copied and moved in stages. After each portion of the source file has been copied to the target, the number of bytes transferred is updated. This function may be called from MFileManObserver::NotifyFileManOperation() and may be used to support the increment of progress bars.

Return value

TInt

The number of bytes transferred.


Attribs()

Capability: Dependent If aName is /Sys then Tcb capability is required. If aName begins with /Private and does not match this process' SID then AllFiles capability is required. If aName is /Resource then Tcb capability is required.

IMPORT_C TInt Attribs(const TDesC &aName, TUint aSetMask, TUint aClearMask, const TTime &aTime, TUint aSwitch=0);

Description

Sets or clears attributes for one or more files using two bitmasks

This is a synchronous function.

The first bitmask specifies the attributes to be set. The second specifies the attributes to be cleared. The date and time of the files' last modification can also be changed.

The function can operate recursively or non-recursively. When operating non-recursively, only the matching files located in the directory specified in aName are affected. When operating recursively, all matching files in the directory hierarchy below the directory specified in aName will be affected.

Notes:

1. A panic is raised if any attribute is specified in both bitmasks.

2. Attempting to change the attributes for an open file results in an error for that file, as retrieved by CFileBase::GetLastError().

3. An attempt to set or clear the KEntryAttDir or KEntryAttVolume attribute for a file or directory will have no effect.

Parameters

const TDesC &aName

Path indicating the file(s) whose attributes are to be changed. Any path components which are not specified here will be taken from the session path. Use wildcards to specify more than one file.

TUint aSetMask

Bitmask indicating the attributes to be set.

TUint aClearMask

Bitmask indicating the attributes to be cleared. For more information, see KEntryAttNormal and the other file/directory attributes.

const TTime &aTime

Contains the new modification date and time for the files, in UTC. To preserve the file's timestamps, specify a TTime value of 0.

TUint aSwitch

Specify zero for no recursion; CFileMan::ERecurse for recursion. By default, the synchronous variant of this function operates non-recursively.

Return value

TInt

KErrNone if successful, otherwise one of the other system-wide error codes.


Attribs()

Capability: Dependent If aName is /Sys then Tcb capability is required. If aName begins with /Private and does not match this process' SID then AllFiles capability is required. If aName is /Resource then Tcb capability is required.

IMPORT_C TInt Attribs(const TDesC &aName, TUint aSetMask, TUint aClearMask, const TTime &aTime, TUint aSwitch, TRequestStatus &aStatus);

Description

Sets or clears attributes for one or more files using two bitmasks.

This is an asycnhronous function. Its behaviour is the same as the synchronous overload.

Parameters

const TDesC &aName

Path indicating the file(s) whose attributes are to be changed. Any path components which are not specified here will be taken from the session path. Use wildcards to specify more than one file.

TUint aSetMask

Bitmask indicating the attributes to be set.

TUint aClearMask

Bitmask indicating the attributes to be cleared. For more information, see KEntryAttNormal and the other file/directory attributes.

const TTime &aTime

Contains the new modification date and time for the files, in UTC. To preserve the file's timestamps, specify a TTime value of 0.

TUint aSwitch

Specify zero for no recursion; CFileMan::ERecurse for recursion. By default, the synchronous variant of this function operates non-recursively.

TRequestStatus &aStatus

The request status object. On request completion, indicates how the request completed: KErrNone, if successful, otherwise one of the other system-wide error codes.

Return value

TInt


Copy()

Capability: AllFiles
Capability: Dependent If the path for anOld begins with /Sys then Tcb capability is required. If the path for anOld begins with /Resource then Tcb capability is required

IMPORT_C TInt Copy(const TDesC &anOld, const TDesC &aNew, TUint aSwitch=EOverWrite);

Description

Copies one or more files.

This is a synchronous function.

NB the following applies to files greater than or equal to 2GBytes in size (2,147,483,648 bytes) : Only files smaller than 2GBytes will be copied; any larger files will be skipped and processing will continue with the next file. If at least one file is smaller than 2GBytes, then KErrNone will be returned. If all files are greater than or equal to 2GBytes ,then KErrTooBig will be returned. One way to detect the presence of any large file(s) is to use an observer: calling CFileBase::GetLastError() from MFileManObserver::NotifyFileManEnded() will return KErrToBig for any file >= 2GBytes in size.

Optionally, this function can be set to overwrite any files with the same name which exist in the target directory. If the flag is set for no overwriting, then any files with the same name will not be overwritten, and an error (KErrAlreadyExists) will be returned for that file. Error codes may be retrieved using CFileBase::GetLastError().

If recursive operation is set, all intermediate directories will be created, including any directories in the path specified by aNew which do not already exist.

If recursive operation is not set, only the matching files located in the single directory specified in anOld are copied. No intermediate directories will be created; if any directories in the destination path do not exist, no files will be copied, and this function will return KErrPathNotFound.

Note, in contrast to the way CFileMan::Move(const TDesC&,const TDesC&,...) behaves, the behaviour of the copy operation does not depend on the presence or absence of a trailing backslash ("\") character on the end of the source path. It is only possible to copy the content of the source path. It is NOT possible, by use of a trailing backslash ("\") character on the end of the source path, to request that the last directory level plus its content be copied to the target path. This means that both of the following copy operations produce identical results.

CFileMan fm;
...
fm->Copy(_L("C:\a\b\"), _L("C:\x\y\"), CFileMan::ERecurse);
fm->Copy(_L("C:\a\b"), _L("C:\x\y\"), CFileMan::ERecurse);

Notes:

1. Files can be copied across drives.

2. Open files can be copied if they have been opened using the EFileShareReadersOnly file share mode.

3. Read-only, hidden and system files can be copied and the source file's attributes are preserved in the target file.

Parameters

const TDesC &anOld

Path indicating the file(s) to be copied. Any path components which are not specified here will be taken from the session path.

const TDesC &aNew

Path indicating the directory into which the file(s) are to be copied. Any path components which are not specified here will be taken from the session path

TUint aSwitch

Specify zero for no overwriting and no recursion; CFileMan::EOverWrite to overwrite files with the same name; CFileMan::ERecurse for recursion. By default, the synchronous variant of this function operates non-recursively and with overwriting.

Return value

TInt

KErrNone if successful, otherwise one of the other system-wide error codes.

See also:


Copy()

Capability: AllFiles
Capability: Dependent If the path for aNew begins with /Sys then Tcb capability is required. If the path for aNew begins with /Resource then Tcb capability is required

IMPORT_C TInt Copy(const TDesC &anOld, const TDesC &aNew, TUint aSwitch, TRequestStatus &aStatus);

Description

Copies one or more files.

This is an asycnhronous function. Its behaviour is the same as the synchronous overload.

Parameters

const TDesC &anOld

Path indicating the file(s) to be copied. Any path components which are not specified here will be taken from the session path.

const TDesC &aNew

Path indicating the directory into which the file(s) are to be copied. Any path components which are not specified here will be taken from the session path

TUint aSwitch

Specify zero for no overwriting and no recursion; CFileMan::EOverWrite to overwrite files with the same name; CFileMan::ERecurse for recursion. By default, the synchronous variant of this function operates non-recursively and with overwriting.

TRequestStatus &aStatus

The request status object. On request completion, indicates how the request completed: KErrNone, if successful, otherwise one of the other system-wide error codes.

Return value

TInt

KErrNone if successful, otherwise one of the other system-wide error codes.


Delete()

Capability: Dependent If aName is /Sys then Tcb capability is required. If aName begins with /Private and does not match this process' SID then AllFiles capability is required. If aName is /Resource then Tcb capability is required.

IMPORT_C TInt Delete(const TDesC &aName, TUint aSwitch=0);

Description

Deletes one or more files.

This is a synchronous function.

This function can operate recursively or non-recursively. When operating non-recursively, only the matching files located in the directory specified in aName are affected. When operating recursively, all matching files in the directory hierarchy below the directory specified in aName will be deleted.

Note that read-only and open files may not be deleted. Attempting to do so will return an error for that file. Error codes may be retrieved using CFileBase::GetLastError().

Parameters

const TDesC &aName

Path indicating the file(s) to be deleted. May either be a full path, or relative to the session path. Use wildcards to specify more than one file. NOTE: if you pass KNullDesC, the empty (or null) descriptor, then the function interprets this to mean \*.*

TUint aSwitch

Specify: zero for no recursion; CFileMan::ERecurse for recursion. By default, the synchronous variant of this function operates non-recursively.

Return value

TInt

KErrNone if successful, otherwise one of the other system-wide error codes.

See also:


Delete()

Capability: Dependent If aName is /Sys then Tcb capability is required. If aName begins with /Private and does not match this process' SID then AllFiles capability is required. If aName is /Resource then Tcb capability is required.

IMPORT_C TInt Delete(const TDesC &aName, TUint aSwitch, TRequestStatus &aStatus);

Description

Deletes one or more files.

This is an asycnhronous function. Its behaviour is the same as the synchronous overload.

Parameters

const TDesC &aName

Path indicating the file(s) to be deleted. May either be a full path, or relative to the session path. Use wildcards to specify more than one file. NOTE: if you pass KNullDesC, the empty (or null) descriptor, then the function interprets this to mean \*.*

TUint aSwitch

Specify: zero for no recursion; CFileMan::ERecurse for recursion. By default, the synchronous variant of this function operates non-recursively.

TRequestStatus &aStatus

The request status object. On request completion, indicates how the request completed: KErrNone, if successful, otherwise one of the other system-wide error codes.

Return value

TInt

KErrNone if successful, otherwise one of the other system-wide error codes.

See also:


Move()

Capability: AllFiles
Capability: Dependent If the path in aNew starts with /Sys then capability Tcb is required If the path in aNew starts with /Resource then capability Tcb is required If the path in anOld starts with /Sys then Tcb capability is required. If the path in anOld starts with /Resource then Tcb capability is required.

IMPORT_C TInt Move(const TDesC &anOld, const TDesC &aNew, TUint aSwitch=EOverWrite);

Description

Moves one or more files.

This is a synchronous function.

Optionally, this function can be set to overwrite any files with the same name which exist in the target directory. If the flag is set for no overwriting, then any files with the same name will not be overwritten, and an error (KErrAlreadyExists) will be returned for that file. Error codes may be retrieved using CFileBase::GetLastError(). By default, when the function is operating synchronously, files are overwritten.

When this function is operating recursively, all intermediate directories will be created, including all directories in the destination path specified by aNew which do not already exist.

If recursive operation is not set, only the matching files located in the single directory specified in anOld are moved. No intermediate directories will be created; if any directories in the destination path do not exist, no files will be moved, and this function will return KErrPathNotFound.

The behaviour of the move operation is sensitive to the presence (or absence) of a trailing backslash ("\") character on the end of the source path:

For example, if the directory level "b" contains the files F1,F2 and F3, then:

CFileMan fm;
...
fm->Move(_L("C:\a\b\"), _L("C:\x\y\"), CFileMan::ERecurse);

results in files F1, F2 and F3 being moved from C:\a\b to C:\x\y, leaving the path C:\a\b unchanged, except that it no longer contains the files F1, F2 and F3.

If there is no trailing backslash character, for example:

CFileMan fm;
...
fm->Move(_L("C:\a\b"), _L("C:\x\y\"), CFileMan::ERecurse);

then both the directory level "b" and its contents are moved. This means that there is no longer a directory "b" under C:\a. Instead there is a new directory structure C:\x\y\b and the files F1, F2, and F3 now exist under C:\x\y\b. Also if "b" contains subdirectories, then these are also moved along with "b".

If there is no trailing backslash character and the switch is not set, i.e. 0 is passed as an argument, the operation behaves the same way as by passing CFileMan::ERecurse flag.

for example:

CFileMan fm;
...
fm->Move(_L("C:\a\b"), _L("C:\x\y\"), 0);

The example above produces the same output as:

CFileMan fm;
...
fm->Move(_L("C:\a\b"), _L("C:\x\y\"), CFileMan::ERecurse);

Notes:

  1. Read-only, hidden and system files can be moved and the source file's attributes are preserved in the target file, but open files cannot be moved. Attempting to move an open file will return an error for that file, as retrieved by CFileBase::GetLastError().

Parameters

const TDesC &anOld

Path indicating the files to be moved. May be either a full path, or relative to the session path. Note that if you specify a directory level, then the behaviour of the move operation is sensitive to the presence (or absence) of a trailing backslash ("\") character. Any path components which are not specified here will be taken from the session path. See the main description for the detailed explanation.

const TDesC &aNew

Path indicating the directory into which the file(s) are to be moved. Any path components which are not specified here will be taken from the session path.

TUint aSwitch

CFileMan::EOverWrite to overwrite files with the same name; CFileMan::ERecurse for recursion. By default, the synchronous variant of this function operates non-recursively and with overwriting. And no trailing backslash ("\") character at the end of source path always means CFileMan::ERecurse.

Return value

TInt

KErrNone if successful, otherwise one of the other system-wide error codes.

See also:


Move()

Capability: AllFiles
Capability: Dependent If the path in aNew starts with /Sys then capability Tcb is required If the path in aNew starts with /Resource then capability Tcb is required If the path in anOld starts with /Sys then Tcb capability is required. If the path in anOld starts with /Resource then Tcb capability is required.

IMPORT_C TInt Move(const TDesC &anOld, const TDesC &aNew, TUint aSwitch, TRequestStatus &aStatus);

Description

Moves one or more files.

This is an asycnhronous function. Its behaviour is the same as the synchronous overload.

Parameters

const TDesC &anOld

Path indicating the files to be moved. May be either a full path, or relative to the session path. Any path components which are not specified here will be taken from the session path.

const TDesC &aNew

Path indicating the directory into which the file(s) are to be moved. Any path components which are not specified here will be taken from the session path.

TUint aSwitch

Specify zero for no overwriting and no recursion; CFileMan::EOverWrite to overwrite files with the same name; CFileMan::ERecurse for recursion. By default, the synchronous variant of this function operates non-recursively and with overwriting.

TRequestStatus &aStatus

The request status object. On request completion, indicates how the request completed: KErrNone, if successful, otherwise one of the other system-wide error codes.

Return value

TInt

KErrNone if successful, otherwise one of the other system-wide error codes.


Rename()

Capability: Dependent If either aName or aNewName is /Sys then Tcb capability is required. If either aName or aNewName begins with /Private and does not match this process' SID then AllFiles capability is required. If either aName or aNewName is /Resource then Tcb capability is required.

IMPORT_C TInt Rename(const TDesC &anOld, const TDesC &aNew, TUint aSwitch=EOverWrite);

Description

Renames one or more files, or a directory

This is a synchronous function.

The function can also be used to move files by specifying different destination and source directories.

Some rules for using CFileMan::Rename():

1. General rules:

1.1. Trailing backslash ("\") in either source path (aName) or target path (aNewName) will be interpreted to "\*.*";

For example, following code should behave identically:

CFileMan fm;
...
fm->Rename(_L("C:\SRC\"), _L("C:\TRG\"));
fm->Rename(_L("C:\SRC\*.*"), _L("C:\TRG\"));
fm->Rename(_L("C:\SRC\"), _L("C:\TRG\*.*"));
fm->Rename(_L("C:\SRC\*.*"), _L("C:\TRG\*.*"));

1.2 The behaviour of the rename operation is sensitive to the presence (or absence) of a trailing backslash ("\") character on the end of the target path (aNewName);

For example, under all other constraints (see rules 2. and 3.),

CFileMan fm;
...
fm->Rename(_L("C:\SRC"), _L("C:\TRG\"));

will result in renaming "C:\SRC" to "C:\TRG\SRC", while

CFileMan fm;
...
fm->Rename(_L("C:\SRC"), _L("C:\TRG"));

will result in renaming "C:\SRC" to "C:\TRG".

2. When renaming file(s):

2.1 Wildcards can be used for renaming multiple files;

2.2 An option is provided to allow the user to overwrite any files with the same name which may exist in the target directory; If the flag is set for no overwriting, any files with the same name will not be overwritten, and an error (KErrAlreadyExists) will be returned for that file, as retrieved by CFileBase::GetLastError().

2.3 It can only operate non-recursively, so that only the matching files located in the single directory specified by anOld may be renamed.

2.4 Trying to rename file(s) to existing directory(ies) will fail;

For example, giving following direcotry structure:

C:\SRC\ITEM01
C:\SRC\ITEM02
C:\TRG\ITEM01\
C:\TRG\ITEM02\

Following code will fail:

CFileMan fm;
...
fm->Rename(_L("C:\SRC\ITEM01"), _L("C:\TRG\ITEM01"));
fm->Rename(_L("C:\SRC\ITEM*"), _L("C:\TRG\ITEM*"));
fm->Rename(_L("C:\SRC\"), _L("C:\TRG\"));

3. When renamnig a directory:

3.1. Only when the trailing backslash ("\") is missing from the source path (aName), will the source directory be renamed, otherwise, see rule 1.1.

For example, following code will result in moving "C:\SRC" directory including all its contents:

CFileMan fm;
...
fm->Rename(_L("C:\SRC"), _L("C:\TRG"));
fm->Rename(_L("C:\SRC"), _L("C:\TRG\"));
fm->Rename(_L("C:\SRC"), _L("C:\TRG\*.*"));

3.2. Wildcards can not be used for moving directories;

3.3. Overwriting is not permitted;

For example, giving directory structure as following:

C:\SRC\FILE.TXT
C:\TRG\
C:\TRG\SRC\

following code will fail:

CFileMan fm;
...
fm->Rename(_L("C:\SRC"), _L("C:\TRG"));
fm->Rename(_L("C:\SRC"), _L("C:\TRG\"));
fm->Rename(_L("C:\SRC"), _L("C:\TRG\*.*"));

4. Notes:

4.1. The target and source directories must be on the same drive.

4.2. Read-only, hidden and system files can be moved and the source file's attributes are preserved in the target file, but open files cannot be moved. Attempting to move an open file will return an error for that file, as retrieved by CFileBase::GetLastError().

Parameters

const TDesC &anOld

Path specifying the file(s) to be renamed. Any path components which are not specified here will be taken from the session path.

const TDesC &aNew

Path specifying the new name for the files and/or the new directory. Any directories specified in this path that do not exist, will be created. Any path components which are not specified here will be taken from the session path.

TUint aSwitch

Specify zero for no overwriting; CFileMan::EOverWrite to overwrite files with the same name. This function cannot operate recursively.

Return value

TInt

KErrNone if successful, otherwise one of the other system-wide error codes.

See also:


Rename()

Capability: Dependent If either aName or aNewName is /Sys then Tcb capability is required. If either aName or aNewName begins with /Private and does not match this process' SID then AllFiles capability is required. If either aName or aNewName is /Resource then Tcb capability is required.

IMPORT_C TInt Rename(const TDesC &anOld, const TDesC &aNew, TUint aSwitch, TRequestStatus &aStatus);

Description

Renames one or more files.

This is an asycnhronous function. Its behaviour is the same as the synchronous overload.

Parameters

const TDesC &anOld

Path specifying the file(s) to be renamed. Any path components which are not specified here will be taken from the session path.

const TDesC &aNew

Path specifying the new name for the files and/or the new directory. Any directories specified in this path that do not exist, will be created. Any path components which are not specified here will be taken from the session path.

TUint aSwitch

Specify zero for no overwriting; CFileMan::EOverWrite to overwrite files with the same name. This function cannot operate recursively.

TRequestStatus &aStatus

The request status object. On request completion, indicates how the request completed: KErrNone, if successful, otherwise one of the other system-wide error codes.

Return value

TInt

KErrNone if successful, otherwise one of the other system-wide error codes.


RmDir()

Capability: Dependent If aDirName starts with /Sys then Tcb capability is required. If aDirName begins with /Private and does not match this process' SID then AllFiles capability is required. If aDirName starts with /Resource then Tcb capability is required.

IMPORT_C TInt RmDir(const TDesC &aDirName);

Description

Deletes a directory and all files and directories contained in the directory structure below it.

This is a synchronous function.

The function cannot be used non-recursively. For a non-recursive directory deletion, use RFs::RmDir().

Note:

1. All files in the directory hierarchy to be deleted must be closed and none may have the read-only attribute. Otherwise, not all of the hierarchy will be deleted, and this function will return KErrInUse.

Parameters

const TDesC &aDirName

Path specifying the directory to be deleted. Any path components which are not specified here will be taken from the session path.

Return value

TInt

KErrNone if successful, otherwise one of the other system-wide error codes.


RmDir()

Capability: Dependent If aDirName starts with /Sys then Tcb capability is required. If aDirName begins with /Private and does not match this process' SID then AllFiles capability is required. If aDirName starts with /Resource then Tcb capability is required.

IMPORT_C TInt RmDir(const TDesC &aDirName, TRequestStatus &aStatus);

Description

Deletes a directory and all files and directories contained in the directory structure below it.

Other than being asynchronous, the behaviour of this function is the same as is documented in its synchronous overload.

Parameters

const TDesC &aDirName

Path specifying the directory to be deleted. Any path components which are not specified here will be taken from the session path.

TRequestStatus &aStatus

The request status object. On request completion, indicates how the request completed: KErrNone if successful, otherwise one of the other system-wide error codes.

Return value

TInt

KErrNone if successful, otherwise another of the system-wide error codes.


Copy()

Capability: Dependent If the path for aNew begins with /Sys then Tcb capability is required. If the path for aNew begins with /Private and does not match this process' SID then AllFiles capability is required. If the path for aNew begins with /Resource then Tcb capability is required.

IMPORT_C TInt Copy(const RFile &anOld, const TDesC &aNew, TUint aSwitches=EOverWrite);

Description

Copies from an open file handle to a destination file name.

This is a synchronous function.

Optionally, this function can be set to overwrite the target file. If the flag is set for no overwriting and the target file already exists, then the target file will not be overwritten, and an error (KErrAlreadyExists) will be returned. Error codes may be retrieved using CFileBase::GetLastError().

Notes:

  1. The file can be copied across drives.

  2. Read-only, hidden and system files can be copied and the source file's attributes are preserved in the target file.

Parameters

const RFile &anOld

Open file handle indicating the file to be copied.

const TDesC &aNew

Path indicating the directory (and optionally the filename) into which the file is to be copied. Any path components which are not specified here will be taken from the session path

TUint aSwitches

Specify zero for no overwriting; CFileMan::EOverWrite to overwrite files with the same name; Any other flags are illegal By default, the synchronous variant of this function operates with overwriting.

Return value

TInt

KErrNone if successful, otherwise one of the other system-wide error codes.

See also:


Copy()

Capability: Dependent If the path for aNew begins with /Sys then Tcb capability is required. If the path for aNew begins with /Private and does not match this process' SID then AllFiles capability is required. If the path for aNew begins with /Resource then Tcb capability is required.

IMPORT_C TInt Copy(const RFile &anOld, const TDesC &aNew, TUint aSwitches, TRequestStatus &aStatus);

Description

Copies from an open file handle to a destination file name.

This is an asycnhronous function. Its behaviour is the same as the synchronous overload.

Parameters

const RFile &anOld

Open file handle indicating the file to be copied.

const TDesC &aNew

Path indicating the directory (and optionally the filename) into which the file is to be copied. Any path components which are not specified here will be taken from the session path

TUint aSwitches

Specify zero for no overwriting; CFileMan::EOverWrite to overwrite files with the same name; Any other flags are illegal.

TRequestStatus &aStatus

The request status object. On request completion, indicates how the request completed: KErrNone, if successful, otherwise one of the other system-wide error codes.

Return value

TInt

KErrNone if successful, otherwise one of the other system-wide error codes.

See also:


CompleteOperationL()

private: virtual void CompleteOperationL();

Description

Called from RunL to perform tidy up after an operation.


DoOperationL()

private: virtual void DoOperationL();

Description

Called from RunL to perform the requested operation.

[Top]


Member enumerations


Enum TAction

TAction

Description

An enumeration that identifies CFileMan tasks. This enumeration is used by CurrentAction() to identify which task currently being carried out.

ENone

Inactive

EAttribs

Setting attributes

ECopy

Copying files

EDelete

Deleting files

EMove

Moving files

ERename

Renaming files

ERmDir

Deleting a directory and all contents

ERenameInvalidEntry

Renaming component to VFAT short name (guaranteed to be unique)

ECopyFromHandle

Copying file from open file handle


Enum TSwitch

TSwitch

Description

Overwriting and recursion switch.

Used in CFileMan functions to set whether operations are applied to the specified directory and all directories below it, or the specified directory only.

EOverWrite

Any files in the destination directory that have the same name as the source files in a rename, move or copy operation, will be overwritten.

ERecurse

Recursive operation.