board-picotux200.c

Go to the documentation of this file.

/*
 * linux/arch/arm/mach-at91/board-picotux200.c
 *
 *  Copyright (C) 2005 SAN People
 *  Copyright (C) 2007 Kleinhenz Elektronik GmbH
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

#include <linux/types.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/mtd/physmap.h>

#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>

#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>

#include <mach/board.h>
#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>

#include "generic.h"


static void __init picotux200_init_early(void)
{
    /* Initialize processor: 18.432 MHz crystal */
    at91_initialize(18432000);
}

static struct macb_platform_data __initdata picotux200_eth_data = {
    .phy_irq_pin    = AT91_PIN_PC4,
    .is_rmii    = 1,
};

static struct at91_usbh_data __initdata picotux200_usbh_data = {
    .ports      = 1,
    .vbus_pin   = {-EINVAL, -EINVAL},
    .overcurrent_pin= {-EINVAL, -EINVAL},
};

static struct mci_platform_data __initdata picotux200_mci0_data = {
    .slot[0] = {
        .bus_width  = 4,
        .detect_pin = AT91_PIN_PB27,
        .wp_pin     = AT91_PIN_PA17,
    },
};

#define PICOTUX200_FLASH_BASE   AT91_CHIPSELECT_0
#define PICOTUX200_FLASH_SIZE   SZ_4M

static struct physmap_flash_data picotux200_flash_data = {
    .width  = 2,
};

static struct resource picotux200_flash_resource = {
    .start      = PICOTUX200_FLASH_BASE,
    .end        = PICOTUX200_FLASH_BASE + PICOTUX200_FLASH_SIZE - 1,
    .flags      = IORESOURCE_MEM,
};

static struct platform_device picotux200_flash = {
    .name       = "physmap-flash",
    .id     = 0,
    .dev        = {
                .platform_data  = &picotux200_flash_data,
            },
    .resource   = &picotux200_flash_resource,
    .num_resources  = 1,
};

static void __init picotux200_board_init(void)
{
    /* Serial */
    /* DBGU on ttyS0. (Rx & Tx only) */
    at91_register_uart(0, 0, 0);

    /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
    at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
              | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
              | ATMEL_UART_RI);
    at91_add_device_serial();
    /* Ethernet */
    at91_add_device_eth(&picotux200_eth_data);
    /* USB Host */
    at91_add_device_usbh(&picotux200_usbh_data);
    /* I2C */
    at91_add_device_i2c(NULL, 0);
    /* MMC */
    at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
    at91_add_device_mci(0, &picotux200_mci0_data);
    /* NOR Flash */
    platform_device_register(&picotux200_flash);
}

MACHINE_START(PICOTUX2XX, "picotux 200")
    /* Maintainer: Kleinhenz Elektronik GmbH */
    .timer      = &at91rm9200_timer,
    .map_io     = at91_map_io,
    .handle_irq = at91_aic_handle_irq,
    .init_early = picotux200_init_early,
    .init_irq   = at91_init_irq_default,
    .init_machine   = picotux200_board_init,
MACHINE_END