mach-pcm037.c File Reference

#include <linux/types.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/plat-ram.h>
#include <linux/memory.h>
#include <linux/gpio.h>
#include <linux/smsc911x.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/delay.h>
#include <linux/spi/spi.h>
#include <linux/irq.h>
#include <linux/can/platform/sja1000.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/gfp.h>
#include <linux/memblock.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <media/soc_camera.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/memblock.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx3.h>
#include <mach/ulpi.h>
#include "devices-imx31.h"
#include "pcm037.h"

Go to the source code of this file.

Macros
#define	SDHC1_GPIO_WP   IOMUX_TO_GPIO(MX31_PIN_SFS6)
#define	SDHC1_GPIO_DET   IOMUX_TO_GPIO(MX31_PIN_SCK6)
#define	MX3_CAMERA_BUF_SIZE   SZ_4M
#define	H2_PAD_CFG

Functions
	__setup ("pcm037_variant=", pcm037_variant_setup)
enum pcm037_board_variant	pcm037_variant (void)

Variables
struct mx3_camera_pdata camera_pdata	__initdata
struct sja1000_platform_data	pcm970_sja1000_platform_data
	atag_offset = 0x100
	reserve = pcm037_reserve
	map_io = mx31_map_io
	init_early = imx31_init_early
	init_irq = mx31_init_irq
	handle_irq = imx31_handle_irq
	timer = &pcm037_timer
	init_machine = pcm037_init
	init_late = pcm037_init_late
	restart = mxc_restart

Macro Definition Documentation

#define H2_PAD_CFG

Value:

(PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \
        | PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)

#define MX3_CAMERA_BUF_SIZE   SZ_4M

Definition at line 412 of file mach-pcm037.c.

#define SDHC1_GPIO_DET   IOMUX_TO_GPIO(MX31_PIN_SCK6)

Definition at line 353 of file mach-pcm037.c.

#define SDHC1_GPIO_WP   IOMUX_TO_GPIO(MX31_PIN_SFS6)

Definition at line 352 of file mach-pcm037.c.

Function Documentation

__setup

(

)

enum pcm037_board_variant pcm037_variant

(

void

)

Definition at line 68 of file mach-pcm037.c.

Variable Documentation

bool otg_mode_host __initdata

Initial value:

= {
    .flags      = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
    .mclk_10khz = 2000,
}

Definition at line 406 of file mach-pcm037.c.

atag_offset = 0x100

Definition at line 706 of file mach-pcm037.c.

handle_irq = imx31_handle_irq

Definition at line 711 of file mach-pcm037.c.

init_early = imx31_init_early

Definition at line 709 of file mach-pcm037.c.

init_irq = mx31_init_irq

Definition at line 710 of file mach-pcm037.c.

init_late = pcm037_init_late

Definition at line 714 of file mach-pcm037.c.

init_machine = pcm037_init

Definition at line 713 of file mach-pcm037.c.

map_io = mx31_map_io

Definition at line 708 of file mach-pcm037.c.

struct sja1000_platform_data pcm970_sja1000_platform_data

Initial value:

= {
    .osc_freq   = 16000000,
    .ocr        = OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL,
    .cdr        = CDR_CBP,
}

Definition at line 514 of file mach-pcm037.c.

reserve = pcm037_reserve

Definition at line 707 of file mach-pcm037.c.

restart = mxc_restart

Definition at line 715 of file mach-pcm037.c.

timer = &pcm037_timer

Definition at line 712 of file mach-pcm037.c.