mpc85xx_ads.c

Go to the documentation of this file.

/*
 * MPC85xx setup and early boot code plus other random bits.
 *
 * Maintained by Kumar Gala (see MAINTAINERS for contact information)
 *
 * Copyright 2005 Freescale Semiconductor Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/of_platform.h>

#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/mpic.h>
#include <mm/mmu_decl.h>
#include <asm/udbg.h>

#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>

#ifdef CONFIG_CPM2
#include <asm/cpm2.h>
#include <sysdev/cpm2_pic.h>
#endif

#include "mpc85xx.h"

#ifdef CONFIG_PCI
static int mpc85xx_exclude_device(struct pci_controller *hose,
                   u_char bus, u_char devfn)
{
    if (bus == 0 && PCI_SLOT(devfn) == 0)
        return PCIBIOS_DEVICE_NOT_FOUND;
    else
        return PCIBIOS_SUCCESSFUL;
}
#endif /* CONFIG_PCI */

static void __init mpc85xx_ads_pic_init(void)
{
    struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
            0, 256, " OpenPIC  ");
    BUG_ON(mpic == NULL);
    mpic_init(mpic);

    mpc85xx_cpm2_pic_init();
}

/*
 * Setup the architecture
 */
#ifdef CONFIG_CPM2
struct cpm_pin {
    int port, pin, flags;
};

static const struct cpm_pin mpc8560_ads_pins[] = {
    /* SCC1 */
    {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
    {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
    {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},

    /* SCC2 */
    {2, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
    {2, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
    {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
    {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
    {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},

    /* FCC2 */
    {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
    {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
    {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
    {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
    {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
    {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
    {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
    {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
    {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
    {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
    {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
    {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
    {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
    {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
    {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */
    {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */

    /* FCC3 */
    {1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
    {1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
    {1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
    {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
    {1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
    {1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
    {1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
    {1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
    {1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
    {1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
    {1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
    {1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
    {1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
    {2, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK16 */
    {2, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK15 */
    {2, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
};

static void __init init_ioports(void)
{
    int i;

    for (i = 0; i < ARRAY_SIZE(mpc8560_ads_pins); i++) {
        const struct cpm_pin *pin = &mpc8560_ads_pins[i];
        cpm2_set_pin(pin->port, pin->pin, pin->flags);
    }

    cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
    cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
    cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
    cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
    cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
    cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
    cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX);
    cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX);
}
#endif

static void __init mpc85xx_ads_setup_arch(void)
{
    if (ppc_md.progress)
        ppc_md.progress("mpc85xx_ads_setup_arch()", 0);

#ifdef CONFIG_CPM2
    cpm2_reset();
    init_ioports();
#endif

#ifdef CONFIG_PCI
    ppc_md.pci_exclude_device = mpc85xx_exclude_device;
#endif

    fsl_pci_assign_primary();
}

static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
{
    uint pvid, svid, phid1;

    pvid = mfspr(SPRN_PVR);
    svid = mfspr(SPRN_SVR);

    seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
    seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
    seq_printf(m, "SVR\t\t: 0x%x\n", svid);

    /* Display cpu Pll setting */
    phid1 = mfspr(SPRN_HID1);
    seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
}

machine_arch_initcall(mpc85xx_ads, mpc85xx_common_publish_devices);

/*
 * Called very early, device-tree isn't unflattened
 */
static int __init mpc85xx_ads_probe(void)
{
        unsigned long root = of_get_flat_dt_root();

        return of_flat_dt_is_compatible(root, "MPC85xxADS");
}

define_machine(mpc85xx_ads) {
    .name           = "MPC85xx ADS",
    .probe          = mpc85xx_ads_probe,
    .setup_arch     = mpc85xx_ads_setup_arch,
    .init_IRQ       = mpc85xx_ads_pic_init,
    .show_cpuinfo       = mpc85xx_ads_show_cpuinfo,
    .get_irq        = mpic_get_irq,
    .restart        = fsl_rstcr_restart,
    .calibrate_decr     = generic_calibrate_decr,
    .progress       = udbg_progress,
};