rd88f6281-setup.c

Go to the documentation of this file.

/*
 * arch/arm/mach-kirkwood/rd88f6281-setup.c
 *
 * Marvell RD-88F6281 Reference Board Setup
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"

static struct mtd_partition rd88f6281_nand_parts[] = {
    {
        .name = "u-boot",
        .offset = 0,
        .size = SZ_1M
    }, {
        .name = "uImage",
        .offset = MTDPART_OFS_NXTBLK,
        .size = SZ_2M
    }, {
        .name = "root",
        .offset = MTDPART_OFS_NXTBLK,
        .size = MTDPART_SIZ_FULL
    },
};

static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
    .phy_addr   = MV643XX_ETH_PHY_NONE,
    .speed      = SPEED_1000,
    .duplex     = DUPLEX_FULL,
};

static struct dsa_chip_data rd88f6281_switch_chip_data = {
    .port_names[0]  = "lan1",
    .port_names[1]  = "lan2",
    .port_names[2]  = "lan3",
    .port_names[3]  = "lan4",
    .port_names[5]  = "cpu",
};

static struct dsa_platform_data rd88f6281_switch_plat_data = {
    .nr_chips   = 1,
    .chip       = &rd88f6281_switch_chip_data,
};

static struct mv643xx_eth_platform_data rd88f6281_ge01_data = {
    .phy_addr   = MV643XX_ETH_PHY_ADDR(11),
};

static struct mv_sata_platform_data rd88f6281_sata_data = {
    .n_ports    = 2,
};

static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
    .gpio_card_detect = 28,
};

static unsigned int rd88f6281_mpp_config[] __initdata = {
    MPP28_GPIO,
    0
};

static void __init rd88f6281_init(void)
{
    u32 dev, rev;

    /*
     * Basic setup. Needs to be called early.
     */
    kirkwood_init();
    kirkwood_mpp_conf(rd88f6281_mpp_config);

    kirkwood_nand_init(ARRAY_AND_SIZE(rd88f6281_nand_parts), 25);
    kirkwood_ehci_init();

    kirkwood_ge00_init(&rd88f6281_ge00_data);
    kirkwood_pcie_id(&dev, &rev);
    if (rev == MV88F6281_REV_A0) {
        rd88f6281_switch_chip_data.sw_addr = 10;
        kirkwood_ge01_init(&rd88f6281_ge01_data);
    } else {
        rd88f6281_switch_chip_data.port_names[4] = "wan";
    }
    kirkwood_ge00_switch_init(&rd88f6281_switch_plat_data, NO_IRQ);

    kirkwood_sata_init(&rd88f6281_sata_data);
    kirkwood_sdio_init(&rd88f6281_mvsdio_data);
    kirkwood_uart0_init();
}

static int __init rd88f6281_pci_init(void)
{
    if (machine_is_rd88f6281())
        kirkwood_pcie_init(KW_PCIE0);

    return 0;
}
subsys_initcall(rd88f6281_pci_init);

MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
    /* Maintainer: Saeed Bishara <[email protected]> */
    .atag_offset    = 0x100,
    .init_machine   = rd88f6281_init,
    .map_io     = kirkwood_map_io,
    .init_early = kirkwood_init_early,
    .init_irq   = kirkwood_init_irq,
    .timer      = &kirkwood_timer,
    .restart    = kirkwood_restart,
MACHINE_END