Data Structures
struct	adis16203_state

Macros
#define	ADIS16203_STARTUP_DELAY 220 /* ms */

#define	ADIS16203_READ_REG(a) a

#define	ADIS16203_WRITE_REG(a) ((a) \| 0x80)

#define	ADIS16203_FLASH_CNT 0x00 /* Flash memory write count */

#define	ADIS16203_SUPPLY_OUT 0x02 /* Output, power supply */

#define	ADIS16203_AUX_ADC 0x08 /* Output, auxiliary ADC input */

#define	ADIS16203_TEMP_OUT 0x0A /* Output, temperature */

#define	ADIS16203_XINCL_OUT 0x0C /* Output, x-axis inclination */

#define	ADIS16203_YINCL_OUT 0x0E /* Output, y-axis inclination */

#define	ADIS16203_INCL_NULL 0x18 /* Incline null calibration */

#define	ADIS16203_ALM_MAG1 0x20 /* Alarm 1 amplitude threshold */

#define	ADIS16203_ALM_MAG2 0x22 /* Alarm 2 amplitude threshold */

#define	ADIS16203_ALM_SMPL1 0x24 /* Alarm 1, sample period */

#define	ADIS16203_ALM_SMPL2 0x26 /* Alarm 2, sample period */

#define	ADIS16203_ALM_CTRL 0x28 /* Alarm control */

#define	ADIS16203_AUX_DAC 0x30 /* Auxiliary DAC data */

#define	ADIS16203_GPIO_CTRL 0x32 /* General-purpose digital input/output control */

#define	ADIS16203_MSC_CTRL 0x34 /* Miscellaneous control */

#define	ADIS16203_SMPL_PRD 0x36 /* Internal sample period (rate) control */

#define	ADIS16203_AVG_CNT 0x38 /* Operation, filter configuration */

#define	ADIS16203_SLP_CNT 0x3A /* Operation, sleep mode control */

#define	ADIS16203_DIAG_STAT 0x3C /* Diagnostics, system status register */

#define	ADIS16203_GLOB_CMD 0x3E /* Operation, system command register */

#define	ADIS16203_OUTPUTS 5

#define	ADIS16203_MSC_CTRL_PWRUP_SELF_TEST (1 << 10) /* Self-test at power-on: 1 = disabled, 0 = enabled */

#define	ADIS16203_MSC_CTRL_REVERSE_ROT_EN (1 << 9) /* Reverses rotation of both inclination outputs */

#define	ADIS16203_MSC_CTRL_SELF_TEST_EN (1 << 8) /* Self-test enable */

#define	ADIS16203_MSC_CTRL_DATA_RDY_EN (1 << 2) /* Data-ready enable: 1 = enabled, 0 = disabled */

#define	ADIS16203_MSC_CTRL_ACTIVE_HIGH (1 << 1) /* Data-ready polarity: 1 = active high, 0 = active low */

#define	ADIS16203_MSC_CTRL_DATA_RDY_DIO1 (1 << 0) /* Data-ready line selection: 1 = DIO1, 0 = DIO0 */

#define	ADIS16203_DIAG_STAT_ALARM2 (1<<9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */

#define	ADIS16203_DIAG_STAT_ALARM1 (1<<8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */

#define	ADIS16203_DIAG_STAT_SELFTEST_FAIL (1<<5) /* Self-test diagnostic error flag */

#define	ADIS16203_DIAG_STAT_SPI_FAIL (1<<3) /* SPI communications failure */

#define	ADIS16203_DIAG_STAT_FLASH_UPT (1<<2) /* Flash update failure */

#define	ADIS16203_DIAG_STAT_POWER_HIGH (1<<1) /* Power supply above 3.625 V */

#define	ADIS16203_DIAG_STAT_POWER_LOW (1<<0) /* Power supply below 3.15 V */

#define	ADIS16203_GLOB_CMD_SW_RESET (1<<7)

#define	ADIS16203_GLOB_CMD_CLEAR_STAT (1<<4)

#define	ADIS16203_GLOB_CMD_FACTORY_CAL (1<<1)

#define	ADIS16203_MAX_TX 12

#define	ADIS16203_MAX_RX 10

#define	ADIS16203_ERROR_ACTIVE (1<<14)

Enumerations
enum	adis16203_scan { ADIS16203_SCAN_SUPPLY, ADIS16203_SCAN_AUX_ADC, ADIS16203_SCAN_TEMP, ADIS16203_SCAN_INCLI_X, ADIS16203_SCAN_INCLI_Y }

Functions
int	adis16203_set_irq (struct iio_dev *indio_dev, bool enable)

Macro Definition Documentation

#define ADIS16203_ALM_CTRL 0x28 /* Alarm control */

Definition at line 20 of file adis16203.h.

#define ADIS16203_ALM_MAG1 0x20 /* Alarm 1 amplitude threshold */

Definition at line 16 of file adis16203.h.

#define ADIS16203_ALM_MAG2 0x22 /* Alarm 2 amplitude threshold */

Definition at line 17 of file adis16203.h.

#define ADIS16203_ALM_SMPL1 0x24 /* Alarm 1, sample period */

Definition at line 18 of file adis16203.h.

#define ADIS16203_ALM_SMPL2 0x26 /* Alarm 2, sample period */

Definition at line 19 of file adis16203.h.

#define ADIS16203_AUX_ADC 0x08 /* Output, auxiliary ADC input */

Definition at line 11 of file adis16203.h.

#define ADIS16203_AUX_DAC 0x30 /* Auxiliary DAC data */

Definition at line 21 of file adis16203.h.

#define ADIS16203_AVG_CNT 0x38 /* Operation, filter configuration */

Definition at line 25 of file adis16203.h.

#define ADIS16203_DIAG_STAT 0x3C /* Diagnostics, system status register */

Definition at line 27 of file adis16203.h.

#define ADIS16203_DIAG_STAT_ALARM1 (1<<8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */

Definition at line 42 of file adis16203.h.

#define ADIS16203_DIAG_STAT_ALARM2 (1<<9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */

Definition at line 41 of file adis16203.h.

#define ADIS16203_DIAG_STAT_FLASH_UPT (1<<2) /* Flash update failure */

Definition at line 45 of file adis16203.h.

#define ADIS16203_DIAG_STAT_POWER_HIGH (1<<1) /* Power supply above 3.625 V */

Definition at line 46 of file adis16203.h.

#define ADIS16203_DIAG_STAT_POWER_LOW (1<<0) /* Power supply below 3.15 V */

Definition at line 47 of file adis16203.h.

#define ADIS16203_DIAG_STAT_SELFTEST_FAIL (1<<5) /* Self-test diagnostic error flag */

Definition at line 43 of file adis16203.h.

#define ADIS16203_DIAG_STAT_SPI_FAIL (1<<3) /* SPI communications failure */

Definition at line 44 of file adis16203.h.

#define ADIS16203_ERROR_ACTIVE (1<<14)

Definition at line 57 of file adis16203.h.

#define ADIS16203_FLASH_CNT 0x00 /* Flash memory write count */

Definition at line 9 of file adis16203.h.

#define ADIS16203_GLOB_CMD 0x3E /* Operation, system command register */

Definition at line 28 of file adis16203.h.

#define ADIS16203_GLOB_CMD_CLEAR_STAT (1<<4)

Definition at line 51 of file adis16203.h.

#define ADIS16203_GLOB_CMD_FACTORY_CAL (1<<1)

Definition at line 52 of file adis16203.h.

#define ADIS16203_GLOB_CMD_SW_RESET (1<<7)

Definition at line 50 of file adis16203.h.

#define ADIS16203_GPIO_CTRL 0x32 /* General-purpose digital input/output control */

Definition at line 22 of file adis16203.h.

#define ADIS16203_INCL_NULL 0x18 /* Incline null calibration */

Definition at line 15 of file adis16203.h.

#define ADIS16203_MAX_RX 10

Definition at line 55 of file adis16203.h.

#define ADIS16203_MAX_TX 12

Definition at line 54 of file adis16203.h.

#define ADIS16203_MSC_CTRL 0x34 /* Miscellaneous control */

Definition at line 23 of file adis16203.h.

#define ADIS16203_MSC_CTRL_ACTIVE_HIGH (1 << 1) /* Data-ready polarity: 1 = active high, 0 = active low */

Definition at line 37 of file adis16203.h.

#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1 (1 << 0) /* Data-ready line selection: 1 = DIO1, 0 = DIO0 */

Definition at line 38 of file adis16203.h.

#define ADIS16203_MSC_CTRL_DATA_RDY_EN (1 << 2) /* Data-ready enable: 1 = enabled, 0 = disabled */

Definition at line 36 of file adis16203.h.

#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST (1 << 10) /* Self-test at power-on: 1 = disabled, 0 = enabled */

Definition at line 33 of file adis16203.h.

#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN (1 << 9) /* Reverses rotation of both inclination outputs */

Definition at line 34 of file adis16203.h.

#define ADIS16203_MSC_CTRL_SELF_TEST_EN (1 << 8) /* Self-test enable */

Definition at line 35 of file adis16203.h.

#define ADIS16203_OUTPUTS 5

Definition at line 30 of file adis16203.h.

#define ADIS16203_READ_REG ( a ) a

Definition at line 6 of file adis16203.h.

#define ADIS16203_SLP_CNT 0x3A /* Operation, sleep mode control */

Definition at line 26 of file adis16203.h.

#define ADIS16203_SMPL_PRD 0x36 /* Internal sample period (rate) control */

Definition at line 24 of file adis16203.h.

#define ADIS16203_STARTUP_DELAY 220 /* ms */

Definition at line 4 of file adis16203.h.

#define ADIS16203_SUPPLY_OUT 0x02 /* Output, power supply */

Definition at line 10 of file adis16203.h.

#define ADIS16203_TEMP_OUT 0x0A /* Output, temperature */

Definition at line 12 of file adis16203.h.

#define ADIS16203_WRITE_REG ( a ) ((a) | 0x80)

Definition at line 7 of file adis16203.h.

#define ADIS16203_XINCL_OUT 0x0C /* Output, x-axis inclination */

Definition at line 13 of file adis16203.h.

#define ADIS16203_YINCL_OUT 0x0E /* Output, y-axis inclination */

Definition at line 14 of file adis16203.h.

Enumeration Type Documentation

enum adis16203_scan

Enumerator:

ADIS16203_SCAN_SUPPLY
ADIS16203_SCAN_AUX_ADC
ADIS16203_SCAN_TEMP
ADIS16203_SCAN_INCLI_X
ADIS16203_SCAN_INCLI_Y

Definition at line 77 of file adis16203.h.

Function Documentation

int adis16203_set_irq	(	struct iio_dev *	indio_dev,
		bool	enable
	)

Definition at line 181 of file adis16203_core.c.

Data Structures

Macros

Enumerations

Functions

Macro Definition Documentation

Enumeration Type Documentation

Function Documentation