board-overo.c File Reference

#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/spi/spi.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mmc/host.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#include "common-board-devices.h"

Go to the source code of this file.

Macros
#define	OVERO_GPIO_BT_XGATE   15
#define	OVERO_GPIO_W2W_NRESET   16
#define	OVERO_GPIO_PENDOWN   114
#define	OVERO_GPIO_BT_NRESET   164
#define	OVERO_GPIO_USBH_CPEN   168
#define	OVERO_GPIO_USBH_NRESET   183
#define	OVERO_SMSC911X_CS   5
#define	OVERO_SMSC911X_GPIO   176
#define	OVERO_SMSC911X2_CS   4
#define	OVERO_SMSC911X2_GPIO   65
#define	OVERO_GPIO_LCD_EN   144
#define	OVERO_GPIO_LCD_BL   145

Variables
	atag_offset = 0x100
	reserve = omap_reserve
	map_io = omap3_map_io
	init_early = omap35xx_init_early
	init_irq = omap3_init_irq
	handle_irq = omap3_intc_handle_irq
	init_machine = overo_init
	init_late = omap35xx_init_late
	timer = &omap3_timer
	restart = omap_prcm_restart

Macro Definition Documentation

#define OVERO_GPIO_BT_NRESET   164

Definition at line 63 of file board-overo.c.

#define OVERO_GPIO_BT_XGATE   15

Definition at line 60 of file board-overo.c.

#define OVERO_GPIO_LCD_BL   145

Definition at line 150 of file board-overo.c.

#define OVERO_GPIO_LCD_EN   144

Definition at line 149 of file board-overo.c.

#define OVERO_GPIO_PENDOWN   114

Definition at line 62 of file board-overo.c.

#define OVERO_GPIO_USBH_CPEN   168

Definition at line 64 of file board-overo.c.

#define OVERO_GPIO_USBH_NRESET   183

Definition at line 65 of file board-overo.c.

#define OVERO_GPIO_W2W_NRESET   16

Definition at line 61 of file board-overo.c.

#define OVERO_SMSC911X2_CS   4

Definition at line 69 of file board-overo.c.

#define OVERO_SMSC911X2_GPIO   65

Definition at line 70 of file board-overo.c.

#define OVERO_SMSC911X_CS   5

Definition at line 67 of file board-overo.c.

#define OVERO_SMSC911X_GPIO   176

Definition at line 68 of file board-overo.c.

Variable Documentation

atag_offset = 0x100

Definition at line 544 of file board-overo.c.

handle_irq = omap3_intc_handle_irq

Definition at line 549 of file board-overo.c.

init_early = omap35xx_init_early

Definition at line 547 of file board-overo.c.

init_irq = omap3_init_irq

Definition at line 548 of file board-overo.c.

init_late = omap35xx_init_late

Definition at line 551 of file board-overo.c.

init_machine = overo_init

Definition at line 550 of file board-overo.c.

map_io = omap3_map_io

Definition at line 546 of file board-overo.c.

reserve = omap_reserve

Definition at line 545 of file board-overo.c.

restart = omap_prcm_restart

Definition at line 553 of file board-overo.c.

timer = &omap3_timer

Definition at line 552 of file board-overo.c.