dib0700.h

Go to the documentation of this file.

/* Linux driver for devices based on the DiBcom DiB0700 USB bridge
 *
 *  This program is free software; you can redistribute it and/or modify it
 *  under the terms of the GNU General Public License as published by the Free
 *  Software Foundation, version 2.
 *
 *  Copyright (C) 2005-6 DiBcom, SA
 */
#ifndef _DIB0700_H_
#define _DIB0700_H_

#define DVB_USB_LOG_PREFIX "dib0700"
#include "dvb-usb.h"

#include "dib07x0.h"

extern int dvb_usb_dib0700_debug;
#define deb_info(args...)   dprintk(dvb_usb_dib0700_debug,0x01,args)
#define deb_fw(args...)     dprintk(dvb_usb_dib0700_debug,0x02,args)
#define deb_fwdata(args...) dprintk(dvb_usb_dib0700_debug,0x04,args)
#define deb_data(args...)   dprintk(dvb_usb_dib0700_debug,0x08,args)

#define REQUEST_SET_USB_XFER_LEN    0x0 /* valid only for firmware version */
                    /* higher than 1.21 */
#define REQUEST_I2C_READ            0x2
#define REQUEST_I2C_WRITE           0x3
#define REQUEST_POLL_RC             0x4 /* deprecated in firmware v1.20 */
#define REQUEST_JUMPRAM             0x8
#define REQUEST_SET_CLOCK           0xB
#define REQUEST_SET_GPIO            0xC
#define REQUEST_ENABLE_VIDEO        0xF
    // 1 Byte: 4MSB(1 = enable streaming, 0 = disable streaming) 4LSB(Video Mode: 0 = MPEG2 188Bytes, 1 = Analog)
    // 2 Byte: MPEG2 mode:  4MSB(1 = Master Mode, 0 = Slave Mode) 4LSB(Channel 1 = bit0, Channel 2 = bit1)
    // 2 Byte: Analog mode: 4MSB(0 = 625 lines, 1 = 525 lines)    4LSB(     "                "           )
#define REQUEST_SET_I2C_PARAM       0x10
#define REQUEST_SET_RC              0x11
#define REQUEST_NEW_I2C_READ        0x12
#define REQUEST_NEW_I2C_WRITE       0x13
#define REQUEST_GET_VERSION         0x15

struct dib0700_state {
    u8 channel_state;
    u16 mt2060_if1[2];
    u8 rc_toggle;
    u8 rc_counter;
    u8 is_dib7000pc;
    u8 fw_use_new_i2c_api;
    u8 disable_streaming_master_mode;
    u32 fw_version;
    u32 nb_packet_buffer_size;
    int (*read_status)(struct dvb_frontend *, fe_status_t *);
    int (*sleep)(struct dvb_frontend* fe);
    u8 buf[255];
};

extern int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
                   u32 *romversion, u32 *ramversion, u32 *fwtype);
extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val);
extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3);
extern int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen);
extern int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw);
extern int dib0700_rc_setup(struct dvb_usb_device *d);
extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
extern struct i2c_algorithm dib0700_i2c_algo;
extern int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
            struct dvb_usb_device_description **desc, int *cold);
extern int dib0700_change_protocol(struct rc_dev *dev, u64 rc_type);
extern int dib0700_set_i2c_speed(struct dvb_usb_device *d, u16 scl_kHz);

extern int dib0700_device_count;
extern int dvb_usb_dib0700_ir_proto;
extern struct dvb_usb_device_properties dib0700_devices[];
extern struct usb_device_id dib0700_usb_id_table[];

#endif