led.c

Go to the documentation of this file.

/******************************************************************************
 *
 * Copyright(c) 2009-2012  Realtek Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 *
 * The full GNU General Public License is included in this distribution in the
 * file called LICENSE.
 *
 * Contact Information:
 * wlanfae <[email protected]>
 * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
 * Hsinchu 300, Taiwan.
 *
 *****************************************************************************/

#include "../wifi.h"
#include "../usb.h"
#include "reg.h"
#include "led.h"

static void _rtl92cu_init_led(struct ieee80211_hw *hw,
                  struct rtl_led *pled, enum rtl_led_pin ledpin)
{
    pled->hw = hw;
    pled->ledpin = ledpin;
    pled->ledon = false;
}

static void _rtl92cu_deInit_led(struct rtl_led *pled)
{
}

void rtl92cu_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
{
    u8 ledcfg;
    struct rtl_priv *rtlpriv = rtl_priv(hw);

    RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, "LedAddr:%X ledpin=%d\n",
         REG_LEDCFG2, pled->ledpin);
    ledcfg = rtl_read_byte(rtlpriv, REG_LEDCFG2);
    switch (pled->ledpin) {
    case LED_PIN_GPIO0:
        break;
    case LED_PIN_LED0:
        rtl_write_byte(rtlpriv,
                   REG_LEDCFG2, (ledcfg & 0xf0) | BIT(5) | BIT(6));
        break;
    case LED_PIN_LED1:
        rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0x0f) | BIT(5));
        break;
    default:
        RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
             "switch case not processed\n");
        break;
    }
    pled->ledon = true;
}

void rtl92cu_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
{
    struct rtl_priv *rtlpriv = rtl_priv(hw);
    struct rtl_usb_priv *usbpriv = rtl_usbpriv(hw);
    u8 ledcfg;

    RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, "LedAddr:%X ledpin=%d\n",
         REG_LEDCFG2, pled->ledpin);
    ledcfg = rtl_read_byte(rtlpriv, REG_LEDCFG2);
    switch (pled->ledpin) {
    case LED_PIN_GPIO0:
        break;
    case LED_PIN_LED0:
        ledcfg &= 0xf0;
        if (usbpriv->ledctl.led_opendrain)
            rtl_write_byte(rtlpriv, REG_LEDCFG2,
                       (ledcfg | BIT(1) | BIT(5) | BIT(6)));
        else
            rtl_write_byte(rtlpriv, REG_LEDCFG2,
                       (ledcfg | BIT(3) | BIT(5) | BIT(6)));
        break;
    case LED_PIN_LED1:
        ledcfg &= 0x0f;
        rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg | BIT(3)));
        break;
    default:
        RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
             "switch case not processed\n");
        break;
    }
    pled->ledon = false;
}

void rtl92cu_init_sw_leds(struct ieee80211_hw *hw)
{
    struct rtl_usb_priv *usbpriv = rtl_usbpriv(hw);
    _rtl92cu_init_led(hw, &(usbpriv->ledctl.sw_led0), LED_PIN_LED0);
    _rtl92cu_init_led(hw, &(usbpriv->ledctl.sw_led1), LED_PIN_LED1);
}

void rtl92cu_deinit_sw_leds(struct ieee80211_hw *hw)
{
    struct rtl_usb_priv *usbpriv = rtl_usbpriv(hw);
    _rtl92cu_deInit_led(&(usbpriv->ledctl.sw_led0));
    _rtl92cu_deInit_led(&(usbpriv->ledctl.sw_led1));
}

static void _rtl92cu_sw_led_control(struct ieee80211_hw *hw,
                    enum led_ctl_mode ledaction)
{
}

void rtl92cu_led_control(struct ieee80211_hw *hw,
            enum led_ctl_mode ledaction)
{
    struct rtl_priv *rtlpriv = rtl_priv(hw);
    struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));

    if ((ppsc->rfoff_reason > RF_CHANGE_BY_PS) &&
        (ledaction == LED_CTL_TX ||
         ledaction == LED_CTL_RX ||
         ledaction == LED_CTL_SITE_SURVEY ||
         ledaction == LED_CTL_LINK ||
         ledaction == LED_CTL_NO_LINK ||
         ledaction == LED_CTL_START_TO_LINK ||
         ledaction == LED_CTL_POWER_ON)) {
        return;
    }
    RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, "ledaction %d\n", ledaction);
    _rtl92cu_sw_led_control(hw, ledaction);
}