Convert a Replica Set to a Sharded Cluster¶

On this page

Overview¶

This tutorial converts a single three-member replica set to a sharded cluster with two shards. Each shard is an independent three-member replica set. This tutorial is specific to MongoDB 3.4. For other versions of MongoDB, refer to the corresponding version of the MongoDB Manual.

The procedure is as follows:

Create the initial three-member replica set and insert data into a collection. See Set Up Initial Replica Set.
Start the config servers and a mongos. See Deploy Config Server Replica Set and mongos.
Add the initial replica set as a shard. See Add Initial Replica Set as a Shard.
Create a second shard and add to the cluster. See Add Second Shard.
Shard the desired collection. See Shard a Collection.

Prerequisites¶

This tutorial uses a total of ten servers: one server for the mongos and three servers each for the first replica set, the second replica set, and the config server replica set.

Each server must have a resolvable domain, hostname, or IP address within your system.

The tutorial uses the default data directories (e.g. /data/db and /data/configdb). Create the appropriate directories with appropriate permissions. To use different paths, see Configuration File Options .

Procedures¶

Set Up Initial Replica Set¶

This procedure creates the initial three-member replica set rs0. The replica set members are on the following hosts: mongodb0.example.net, mongodb1.example.net, and mongodb2.example.net.

1

Start each member of the replica set with the appropriate options.¶

For each member, start a mongod, specifying the replica set name through the replSet option. Include any other parameters specific to your deployment. For replication-specific parameters, see Replication Options.

mongod --replSet "rs0"

Repeat this step for the other two members of the rs0 replica set.

2

Connect a `mongo` shell to a replica set member.¶

Connect a mongo shell to one member of the replica set (e.g. mongodb0.example.net)

mongo mongodb0.example.net

3

Initiate the replica set.¶

From the mongo shell, run rs.initiate() to initiate a replica set that consists of the current member.

rs.initiate( {
   _id : "rs0",
   members: [ { _id : 0, host : "mongodb0.example.net:27017" } ]
})

4

Add the remaining members to the replica set.¶

rs.add("mongodb1.example.net")
rs.add("mongodb2.example.net")

5

Create and populate a new collection.¶

The following step adds one million documents to the collection test_collection and can take several minutes depending on your system.

Issue the following operations on the primary of the replica set:

use test
var bulk = db.test_collection.initializeUnorderedBulkOp();
people = ["Marc", "Bill", "George", "Eliot", "Matt", "Trey", "Tracy", "Greg", "Steve", "Kristina", "Katie", "Jeff"];
for(var i=0; i<1000000; i++){
   user_id = i;
   name = people[Math.floor(Math.random()*people.length)];
   number = Math.floor(Math.random()*10001);
   bulk.insert( { "user_id":user_id, "name":name, "number":number });
}
bulk.execute();

For more information on deploying a replica set, see Deploy a Replica Set.

Restart the Replica Set as a Shard¶

Changed in version 3.4: For MongoDB 3.4 sharded clusters, mongod instances for the shards must explicitly specify its role as a shardsvr, either via the configuration file setting sharding.clusterRole or via the command line option --shardsvr.

Note

Default port for mongod instances with the shardsvr role is 27018. To use a different port, specify net.port setting or --port option.

1

Determine the primary and secondary members.¶

Connect a mongo shell to one of the members and run rs.status() to determine the primary and secondary members.

2

Restart secondary members with the `--shardsvr` option.¶

One secondary at a time, restart each secondary with the --shardsvr option. To continue to use the same port, include the --port option.

mongod --replSet "rs0" --shardsvr --port 27017

Repeat this step for the other secondary.

3

Step down the primary.¶

Connect a mongo shell to the primary and stepdown the primary.

rs.stepDown()

4

Restart the primary with the `--shardsvr` option.¶

Restart the primary with the --shardsvr option. To continue to use the same port, include the --port option.

mongod --replSet "rs0" --shardsvr --port 27017

Deploy Config Server Replica Set and `mongos`¶

This procedure deploys the three-member replica set for the config servers and the mongos.

The config servers use the following hosts: mongodb7.example.net, mongodb8.example.net, and mongodb9.example.net.
The mongos uses mongodb6.example.net.

1

Deploy the config servers as a three-member replica set.¶

Start a config server on mongodb7.example.net, mongodb8.example.net, and mongodb9.example.net. Specify the same replica set name. The config servers use the default data directory /data/configdb and the default port 27019.

mongod --configsvr --replSet configReplSet

To modify the default settings or to include additional options specific to your deployment, see mongod or Configuration File Options.

Connect a mongo shell to one of the config servers and run rs.initiate() to initiate the replica set.

rs.initiate( {
   _id: "configReplSet",
   configsvr: true,
   members: [
      { _id: 0, host: "mongodb07.example.net:27019" },
      { _id: 1, host: "mongodb08.example.net:27019" },
      { _id: 2, host: "mongodb09.example.net:27019" }
   ]
} )

2

Start a `mongos` instance.¶

On mongodb6.example.net, start the mongos specifying the config server replica set name followed by a slash / and at least one of the config server hostnames and ports.

mongos --configdb configReplSet/mongodb07.example.net:27019,mongodb08.example.net:27019,mongodb09.example.net:27019

Add Initial Replica Set as a Shard¶

The following procedure adds the initial replica set rs0 as a shard.

1

Connect a `mongo` shell to the `mongos`.¶

mongo mongodb6.example.net:27017/admin

2

Add the shard.¶

Add a shard to the cluster with the sh.addShard method:

sh.addShard( "rs0/mongodb0.example.net:27017,mongodb1.example.net:27017,mongodb2.example.net:27017" )

Add Second Shard¶

The following procedure deploys a new replica set rs1 for the second shard and adds it to the cluster. The replica set members are on the following hosts: mongodb3.example.net, mongodb4.example.net, and mongodb5.example.net.

Changed in version 3.4: For MongoDB 3.4 sharded clusters, mongod instances for the shards must explicitly specify its role as a shardsvr, either via the configuration file setting sharding.clusterRole or via the command line option --shardsvr.

Note

Default port for mongod instances with the shardsvr role is 27018. To use a different port, specify net.port setting or --port option.

1

Start each member of the replica set with the appropriate options.¶

For each member, start a mongod, specifying the replica set name through the replSet option and its role as a shard with the --shardsvr option. Include any other parameters specific to your deployment. For replication-specific parameters, see Replication Options.

mongod --replSet "rs1" --shardsvr --port 27017

Repeat this step for the other two members of the rs1 replica set.

2

Connect a `mongo` shell to a replica set member.¶

Connect a mongo shell to one member of the replica set (e.g. mongodb3.example.net)

mongo mongodb3.example.net

3

Initiate the replica set.¶

From the mongo shell, run rs.initiate() to initiate a replica set that consists of the current member.

rs.initiate( {
   _id : "rs1",
   members: [ { _id : 0, host : "mongodb3.example.net:27017" } ]
})

4

Add the remaining members to the replica set.¶

Add the remaining members with the rs.add() method.

rs.add("mongodb4.example.net")
rs.add("mongodb5.example.net")

5

Connect a `mongo` shell to the `mongos`.¶

mongo mongodb6.example.net:27017/admin

6

Add the shard.¶

In a mongo shell connected to the mongos, add the shard to the cluster with the sh.addShard() method:

sh.addShard( "rs1/mongodb3.example.net:27017,mongodb4.example.net:27017,mongodb5.example.net:27017" )

Shard a Collection¶

1

Connect a `mongo` shell to the `mongos`.¶

mongo mongodb6.example.net:27017/admin

2

Enable sharding for a database.¶

Before you can shard a collection, you must first enable sharding for the collection’s database. Enabling sharding for a database does not redistribute data but makes it possible to shard the collections in that database.

The following operation enables sharding on the test database:

sh.enableSharding( "test" )

The operation returns the status of the operation:

{ "ok" : 1 }

3

Determine the shard key.¶

For the collection to shard, determine the shard key. The shard key determines how MongoDB distributes the documents between shards. Good shard keys:

have values that are evenly distributed among all documents,
group documents that are often accessed at the same time into contiguous chunks, and
allow for effective distribution of activity among shards.

Once you shard a collection with the specified shard key, you cannot change the shard key. For more information on shard keys, see Shard Keys.

This procedure will use the number field as the shard key for test_collection.

4

Create an index on the shard key.¶

Before sharding a non-empty collection, create an index on the shard key.

use test
db.test_collection.createIndex( { number : 1 } )

5

Shard the collection.¶

In the test database, shard the test_collection, specifying number as the shard key.

use test
sh.shardCollection( "test.test_collection", { "number" : 1 } )

The method returns the status of the operation:

{ "collectionsharded" : "test.test_collection", "ok" : 1 }

The balancer redistributes chunks of documents when it next runs. As clients insert additional documents into this collection, the mongos routes the documents to the appropriate shard.

6

Confirm the shard is balancing.¶

To confirm balancing activity, run db.stats() or db.printShardingStatus() in the test database.

use test
db.stats()
db.printShardingStatus()

Example output of the db.stats():

{
  "raw" : {
      "rs0/mongodb0.example.net:27017,mongodb1.example.net:27017,mongodb2.example.net:27017" : {
         "db" : "test",
         "collections" : 1,
         "views" : 0,
         "objects" : 640545,
         "avgObjSize" : 70.83200339949052,
         "dataSize" : 45370913,
         "storageSize" : 50438144,
         "numExtents" : 0,
         "indexes" : 2,
         "indexSize" : 24502272,
         "ok" : 1,
         "$gleStats" : {
                     "lastOpTime" : Timestamp(0, 0),
                     "electionId" : ObjectId("7fffffff0000000000000003")
                  }
      },
      "rs1/mongodb3.example.net:27017,mongodb4.example.net:27017,mongodb5.example.net:27017" : {
         "db" : "test",
         "collections" : 1,
         "views" : 0,
         "objects" : 359455,
         "avgObjSize" : 70.83259935179647,
         "dataSize" : 25461132,
         "storageSize" : 8630272,
         "numExtents" : 0,
         "indexes" : 2,
         "indexSize" : 8151040,
         "ok" : 1,
         "$gleStats" : {
            "lastOpTime" : Timestamp(0, 0),
            "electionId" : ObjectId("7fffffff0000000000000001")
         }

      }
  },
  "objects" : 1000000,
  "avgObjSize" : 70,
  "dataSize" : 70832045,
  "storageSize" : 59068416,
  "numExtents" : 0,
  "indexes" : 4,
  "indexSize" : 32653312,
  "fileSize" : 0,
  "extentFreeList" : {
      "num" : 0,
      "totalSize" : 0
  },
  "ok" : 1
}

Example output of the db.printShardingStatus():

--- Sharding Status ---
sharding version: {
   "_id" : 1,
   "minCompatibleVersion" : 5,
   "currentVersion" : 6,
   "clusterId" : ObjectId("58039f730a4826076824c25f")
}
shards:
   {  "_id" : "rs0",  "host" : "rs0/mongodb0.example.net:27017,mongodb1.example.net:27017,mongodb2.example.net:27017",  "state" : 1 }
   {  "_id" : "rs1",  "host" : "rs1/mongodb3.example.net:27017,mongodb4.example.net:27017,mongodb5.example.net:27017",  "state" : 1 }
active mongoses:
   "3.4.0" : 1
autosplit:
   Currently enabled: yes
balancer:
   Currently enabled:  yes
   Currently running:  yes
         Balancer lock taken at Sun Oct 16 2016 11:59:51 GMT-0400 (EDT) by ConfigServer:Balancer
Failed balancer rounds in last 5 attempts:  0
Migration Results for the last 24 hours:
   3 : Success
   1 : Failed with error 'aborted', from rs0 to rs1
databases:
   {  "_id" : "test", "primary" : "rs0", "partitioned" : true }
      test.test_collection
            shard key: { "number" : 1 }
            unique: false
            balancing: true
            chunks:
               rs0   5
               rs1   1
            { "number" : { "$minKey" : 1 } } -->> { "number" : 1195 } on : rs1 Timestamp(2, 0)
            { "number" : 1195 } -->> { "number" : 2394 } on : rs0 Timestamp(2, 1)
            { "number" : 2394 } -->> { "number" : 3596 } on : rs0 Timestamp(1, 5)
            { "number" : 3596 } -->> { "number" : 4797 } on : rs0 Timestamp(1, 6)
            { "number" : 4797 } -->> { "number" : 9588 } on : rs0 Timestamp(1, 1)
            { "number" : 9588 } -->> { "number" : { "$maxKey" : 1 } } on : rs0 Timestamp(1, 2)

Run these commands for a second time to demonstrate that chunks are migrating from rs0 to rs1.

← Convert Sharded Cluster to Replica Set Sharding Reference →

Convert a Replica Set to a Sharded Cluster¶

Overview¶

Prerequisites¶

Procedures¶

Set Up Initial Replica Set¶

Start each member of the replica set with the appropriate options.¶

Connect a mongo shell to a replica set member.¶

Initiate the replica set.¶

Add the remaining members to the replica set.¶

Create and populate a new collection.¶

Restart the Replica Set as a Shard¶

Determine the primary and secondary members.¶

Restart secondary members with the --shardsvr option.¶

Step down the primary.¶

Restart the primary with the --shardsvr option.¶

Deploy Config Server Replica Set and mongos¶

Deploy the config servers as a three-member replica set.¶

Start a mongos instance.¶

Add Initial Replica Set as a Shard¶

Connect a mongo shell to the mongos.¶

Add the shard.¶

Add Second Shard¶

Start each member of the replica set with the appropriate options.¶

Connect a mongo shell to a replica set member.¶

Initiate the replica set.¶

Add the remaining members to the replica set.¶

Connect a mongo shell to the mongos.¶

Add the shard.¶

Shard a Collection¶

Connect a mongo shell to the mongos.¶

Enable sharding for a database.¶

Determine the shard key.¶

Create an index on the shard key.¶

Shard the collection.¶

Confirm the shard is balancing.¶

Connect a `mongo` shell to a replica set member.¶

Restart secondary members with the `--shardsvr` option.¶

Restart the primary with the `--shardsvr` option.¶

Deploy Config Server Replica Set and `mongos`¶

Start a `mongos` instance.¶

Connect a `mongo` shell to the `mongos`.¶

Connect a `mongo` shell to a replica set member.¶

Connect a `mongo` shell to the `mongos`.¶

Connect a `mongo` shell to the `mongos`.¶