S

-S option

ikecert certlocal command, ()

in.routed daemon, ()

-s option, ping command, ()

SCTP protocol

adding SCTP-enabled services, ()

description, ()

displaying statistics, ()

displaying status, ()

IPsec and, ()

limitations with IPsec, ()

service in /etc/inet/services file, ()

security

IKE, ()

IPsec, ()

security associations, Mobile IP, ()

security associations (SAs)

adding IPsec, ()

creating manually, ()

flushing IPsec SAs, ()

getting keys for, ()

IKE, ()

IPsec, (), ()

IPsec database, ()

ISAKMP, ()

random number generation, ()

replacing IPsec SAs, ()

security associations database (SADB), ()

security considerations

6to4 relay router issues, ()

authentication header (AH), ()

configuring

IKE to find hardware, ()

IKE transmission parameters, ()

IKE with certificates, ()

IKE with preshared keys, ()

IPsec, ()

encapsulating security payload (ESP), ()

ike/config file, ()

ipsecconf command, ()

ipsecinit.conf file, ()

ipseckey command, ()

ipseckeys file, ()

IPv6-enabled networks, ()

latched sockets, ()

Mobile IP, ()

preshared keys, ()

security protocols, ()

WiFi, ()

security parameter index (SPI)

constructing, ()

description, ()

key size, ()

Mobile IP, (), ()

security policy

ike/config file (IKE), ()

IPsec, ()

ipsecinit.conf file (IPsec), ()

security policy database (SPD)

configuring, ()

IPsec, (), ()

security protocols

authentication header (AH), ()

encapsulating security payload (ESP), ()

IPsec protection mechanisms, ()

overview, ()

security considerations, ()

selectors, ()

IPQoS 5-tuple, ()

planning, in the QoS policy, ()

selectors, list of, ()

sending hosts

packet travel through, (), ()

servers, IPv6

enabling IPv6, ()

planning tasks, ()

service-level agreement (SLA), ()

billing clients, based on flow accounting, ()

classes of services, ()

providing different classes of service, ()

services

network and svcadm command, (), (), (), ()

services database

corresponding name service files, ()

overview, ()

updating, for SCTP, ()

session layer (OSI), ()

Simple Network Management Protocol (SNMP), ()

site-local addresses, IPv6, ()

site prefix, IPv6

advertising, on the router, ()

definition, (), ()

how to obtain, ()

site topology, IPv6, ()

Size label, (), ()

slots, in hardware, ()

SNMP (Simple Network Management Protocol), ()

snoop command

checking packet flow, ()

checking packets between server and client, ()

displaying packet contents, ()

extensions for IPv6, ()

ip6 protocol keyword, ()

Mobile IP extensions, ()

monitoring DHCP traffic, ()

sample output, ()

monitoring IPv6 traffic, ()

verifying packet protection, ()

viewing protected packets, ()

sockets

displaying socket status with netstat, ()

IPsec security, ()

security considerations, ()

softtoken keystore

key storage with metaslot, (), (), ()

Solaris cryptographic framework, IPsec, and, ()

Solaris IP Filter

address pools

appending, ()

removing, ()

viewing, ()

address pools and, ()

configuration file examples, ()

creating

log files, ()

creating configuration files, ()

deactivating, ()

NAT, ()

/etc/ipf/ipf.conf file, ()

/etc/ipf/ipf6.conf file, ()

/etc/ipf/ipnat.conf file, ()

/etc/ipf/ippool.conf file, ()

flush log file, ()

guidelines for using, ()

ifconfig command, ()

ipf command, ()

-6 option, ()

ipf.conf file, ()

ipf6.conf file, ()

ipfstat command

-6 option, ()

ipmon command

IPv6 and, ()

ipnat command, ()

ipnat.conf file, ()

ippool command, ()

IPv6 and, ()

ippool.conf file, ()

IPv6, ()

loopback filtering, ()

managing packet filtering rule sets, ()

NAT and, ()

NAT rules

appending, ()

viewing, ()

open source information, ()

overview, ()

packet filter hooks, (), ()

packet filtering overview, ()

re-enabling, ()

removing

NAT rules, ()

rule set

activating different, ()

rule sets

active, ()

appending to active, ()

appending to inactive, ()

inactive, ()

removing, ()

removing inactive, ()

switching between, ()

rule sets and, ()

saving logged packets to a file, ()

viewing

address pool statistics, ()

log files, ()

NAT statistics, ()

state statistics, ()

state tables, ()

space-saving mode, in.routed daemon option, ()

SPI label, (), (), (), ()

SPI section

labels and values, ()

Mobile IP configuration file, (), (), ()

standby interface

configuring for an IPMP group, ()

configuring test address on, ()

definition, ()

standby parameter

ifconfig command, (), ()

state information, Mobile IP, ()

state statistics, viewing, ()

state tables, viewing, ()

stateless address autoconfiguration, ()

static routing, (), ()

adding a static route, (), ()

best uses, ()

configuration example, ()

host configuration example, ()

manually configuring on a host, ()

statistics

packet transmission (ping), (), ()

per-protocol (netstat), ()

statistics for IPQoS

enabling class-based statistics, ()

enabling global statistics, (), ()

generating, through the kstat command, ()

storing

IKE keys on disk, (), (), ()

IKE keys on hardware, (), ()

subdivisions, administrative, ()

subnet prefix, IPv6, ()

subnets

IPv4

addresses and, ()

netmask configuration, ()

IPv4 addresses and, ()

IPv6

6to4 topology and, ()

definition, ()

suggestions for numbering, ()

netmasks database, ()

editing /etc/inet/netmasks file, (), ()

network mask creation, (), ()

network configuration servers, ()

network masks

applying to IPv4 address, (), ()

creating, ()

overview, ()

subnet number, IPv4, ()

subnet number in IPv4 addresses, ()

subnet prefix, IPv6, ()

Sun Crypto Accelerator 1000 board, ()

using with IKE, ()

Sun Crypto Accelerator 4000 board

accelerating IKE computations, ()

storing IKE keys, ()

using with IKE, ()

svcadm command

disabling network services, (), (), (), ()

switch configuration

in a VLAN topology, ()

in an aggregation topology, ()

link aggregation control protocol (LACP) modes, (), ()

symbolic names for network numbers, ()

SYN segment, ()

sys-unconfig command

and DHCP client, (), ()

syslog.conf file logging for IPQoS, ()

systems, protecting communication, ()