#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/leds.h>
#include <linux/mfd/tmio.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/sh_flctl.h>
#include <linux/pm_clock.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/sh_intc.h>
#include <linux/tca6416_keypad.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/dma-mapping.h>
#include <video/sh_mobile_hdmi.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <media/soc_camera.h>
#include <media/soc_camera_platform.h>
#include <sound/sh_fsi.h>
#include <sound/simple_card.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/sh7372.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include "sh-gpio.h"

Data Structures
struct	usbhs_private

Macros
#define	USBHS0_POLL_INTERVAL (HZ * 5)

#define	usbhs_get_priv(pdev)

#define	usbhs_is_connected(priv) (!((1 << 7) & __raw_readw(priv->usbcrcaddr)))

#define	IRQ8 evt2irq(0x0300)

#define	USB_PHY_MODE (1 << 4)

#define	USB_PHY_INT_EN ((1 << 3) \| (1 << 2))

#define	USB_PHY_ON (1 << 1)

#define	USB_PHY_OFF (1 << 0)

#define	USB_PHY_INT_CLR (USB_PHY_ON \| USB_PHY_OFF)

#define	IRQ_FSI evt2irq(0x1840)

#define	KEYPAD_BUTTON(ev_type, ev_code, act_low)

#define	KEYPAD_BUTTON_LOW(event_code) KEYPAD_BUTTON(EV_KEY, event_code, 1)

#define	IRQ7 evt2irq(0x02e0)

#define	IRQ9 evt2irq(0x0320)

#define	IRQ21 evt2irq(0x32a0)

#define	GPIO_PORT9CR IOMEM(0xE6051009)

#define	GPIO_PORT10CR IOMEM(0xE605100A)

#define	GPIO_PORT167CR IOMEM(0xE60520A7)

#define	GPIO_PORT168CR IOMEM(0xE60520A8)

#define	SRCR4 IOMEM(0xe61580bc)

#define	USCCR1 IOMEM(0xE6058144)

Variables
	map_io = sh7372_map_io

	init_early = sh7372_add_early_devices

	init_irq = sh7372_init_irq

	handle_irq = shmobile_handle_irq_intc

	init_machine = mackerel_init

	init_late = sh7372_pm_init_late

	timer = &shmobile_timer

Macro Definition Documentation

#define GPIO_PORT10CR IOMEM(0xE605100A)

Definition at line 1408 of file board-mackerel.c.

#define GPIO_PORT167CR IOMEM(0xE60520A7)

Definition at line 1409 of file board-mackerel.c.

#define GPIO_PORT168CR IOMEM(0xE60520A8)

Definition at line 1410 of file board-mackerel.c.

#define GPIO_PORT9CR IOMEM(0xE6051009)

Definition at line 1407 of file board-mackerel.c.

#define IRQ21 evt2irq(0x32a0)

Definition at line 1397 of file board-mackerel.c.

#define IRQ7 evt2irq(0x02e0)

Definition at line 1377 of file board-mackerel.c.

#define IRQ8 evt2irq(0x0300)

Definition at line 702 of file board-mackerel.c.

#define IRQ9 evt2irq(0x0320)

Definition at line 1378 of file board-mackerel.c.

#define IRQ_FSI evt2irq(0x1840)

Definition at line 862 of file board-mackerel.c.

#define KEYPAD_BUTTON	(	ev_type,
		ev_code,
		act_low
	)

Value:

{                               \
    .type       = ev_type,              \
    .code       = ev_code,              \
    .active_low = act_low,              \
}

Definition at line 1352 of file board-mackerel.c.

#define KEYPAD_BUTTON_LOW ( event_code ) KEYPAD_BUTTON(EV_KEY, event_code, 1)