Linux Kernel  3.7.1
 All Data Structures Namespaces Files Functions Variables Typedefs Enumerations Enumerator Macros Groups Pages
dev-ahci.c
Go to the documentation of this file.
1 /* linux/arch/arm/mach-exynos4/dev-ahci.c
2  *
3  * Copyright (c) 2011 Samsung Electronics Co., Ltd.
4  * http://www.samsung.com
5  *
6  * EXYNOS4 - AHCI support
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 as
10  * published by the Free Software Foundation.
11  */
12 
13 #include <linux/clk.h>
14 #include <linux/delay.h>
15 #include <linux/dma-mapping.h>
16 #include <linux/platform_device.h>
17 #include <linux/ahci_platform.h>
18 
19 #include <plat/cpu.h>
20 
21 #include <mach/irqs.h>
22 #include <mach/map.h>
23 #include <mach/regs-pmu.h>
24 
25 /* PHY Control Register */
26 #define SATA_CTRL0 0x0
27 /* PHY Link Control Register */
28 #define SATA_CTRL1 0x4
29 /* PHY Status Register */
30 #define SATA_PHY_STATUS 0x8
31 
32 #define SATA_CTRL0_RX_DATA_VALID(x) (x << 27)
33 #define SATA_CTRL0_SPEED_MODE (1 << 26)
34 #define SATA_CTRL0_M_PHY_CAL (1 << 19)
35 #define SATA_CTRL0_PHY_CMU_RST_N (1 << 10)
36 #define SATA_CTRL0_M_PHY_LN_RST_N (1 << 9)
37 #define SATA_CTRL0_PHY_POR_N (1 << 8)
38 
39 #define SATA_CTRL1_RST_PMALIVE_N (1 << 8)
40 #define SATA_CTRL1_RST_RXOOB_N (1 << 7)
41 #define SATA_CTRL1_RST_RX_N (1 << 6)
42 #define SATA_CTRL1_RST_TX_N (1 << 5)
43 
44 #define SATA_PHY_STATUS_CMU_OK (1 << 18)
45 #define SATA_PHY_STATUS_LANE_OK (1 << 16)
46 
47 #define LANE0 0x200
48 #define COM_LANE 0xA00
49 
50 #define HOST_PORTS_IMPL 0xC
51 #define SCLK_SATA_FREQ (67 * MHZ)
52 
53 static void __iomem *phy_base, *phy_ctrl;
54 
55 struct phy_reg {
58 };
59 
60 /* SATA PHY setup */
61 static const struct phy_reg exynos4_sataphy_cmu[] = {
62  { 0x00, 0x06 }, { 0x02, 0x80 }, { 0x22, 0xa0 }, { 0x23, 0x42 },
63  { 0x2e, 0x04 }, { 0x2f, 0x50 }, { 0x30, 0x70 }, { 0x31, 0x02 },
64  { 0x32, 0x25 }, { 0x33, 0x40 }, { 0x34, 0x01 }, { 0x35, 0x40 },
65  { 0x61, 0x2e }, { 0x63, 0x5e }, { 0x65, 0x42 }, { 0x66, 0xd1 },
66  { 0x67, 0x20 }, { 0x68, 0x28 }, { 0x69, 0x78 }, { 0x6a, 0x04 },
67  { 0x6b, 0xc8 }, { 0x6c, 0x06 },
68 };
69 
70 static const struct phy_reg exynos4_sataphy_lane[] = {
71  { 0x00, 0x02 }, { 0x05, 0x10 }, { 0x06, 0x84 }, { 0x07, 0x04 },
72  { 0x08, 0xe0 }, { 0x10, 0x23 }, { 0x13, 0x05 }, { 0x14, 0x30 },
73  { 0x15, 0x00 }, { 0x17, 0x70 }, { 0x18, 0xf2 }, { 0x19, 0x1e },
74  { 0x1a, 0x18 }, { 0x1b, 0x0d }, { 0x1c, 0x08 }, { 0x50, 0x60 },
75  { 0x51, 0x0f },
76 };
77 
78 static const struct phy_reg exynos4_sataphy_comlane[] = {
79  { 0x01, 0x20 }, { 0x03, 0x40 }, { 0x04, 0x3c }, { 0x05, 0x7d },
80  { 0x06, 0x1d }, { 0x07, 0xcf }, { 0x08, 0x05 }, { 0x09, 0x63 },
81  { 0x0a, 0x29 }, { 0x0b, 0xc4 }, { 0x0c, 0x01 }, { 0x0d, 0x03 },
82  { 0x0e, 0x28 }, { 0x0f, 0x98 }, { 0x10, 0x19 }, { 0x13, 0x80 },
83  { 0x14, 0xf0 }, { 0x15, 0xd0 }, { 0x39, 0xa0 }, { 0x3a, 0xa0 },
84  { 0x3b, 0xa0 }, { 0x3c, 0xa0 }, { 0x3d, 0xa0 }, { 0x3e, 0xa0 },
85  { 0x3f, 0xa0 }, { 0x40, 0x42 }, { 0x42, 0x80 }, { 0x43, 0x58 },
86  { 0x45, 0x44 }, { 0x46, 0x5c }, { 0x47, 0x86 }, { 0x48, 0x8d },
87  { 0x49, 0xd0 }, { 0x4a, 0x09 }, { 0x4b, 0x90 }, { 0x4c, 0x07 },
88  { 0x4d, 0x40 }, { 0x51, 0x20 }, { 0x52, 0x32 }, { 0x7f, 0xd8 },
89  { 0x80, 0x1a }, { 0x81, 0xff }, { 0x82, 0x11 }, { 0x83, 0x00 },
90  { 0x87, 0xf0 }, { 0x87, 0xff }, { 0x87, 0xff }, { 0x87, 0xff },
91  { 0x87, 0xff }, { 0x8c, 0x1c }, { 0x8d, 0xc2 }, { 0x8e, 0xc3 },
92  { 0x8f, 0x3f }, { 0x90, 0x0a }, { 0x96, 0xf8 },
93 };
94 
95 static int wait_for_phy_ready(void __iomem *reg, unsigned long bit)
96 {
97  unsigned long timeout;
98 
99  /* wait for maximum of 3 sec */
100  timeout = jiffies + msecs_to_jiffies(3000);
101  while (!(__raw_readl(reg) & bit)) {
102  if (time_after(jiffies, timeout))
103  return -1;
104  cpu_relax();
105  }
106  return 0;
107 }
108 
109 static int ahci_phy_init(void __iomem *mmio)
110 {
111  int i, ctrl0;
112 
113  for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_cmu); i++)
114  __raw_writeb(exynos4_sataphy_cmu[i].val,
115  phy_base + (exynos4_sataphy_cmu[i].reg * 4));
116 
117  for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_lane); i++)
118  __raw_writeb(exynos4_sataphy_lane[i].val,
119  phy_base + (LANE0 + exynos4_sataphy_lane[i].reg) * 4);
120 
121  for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_comlane); i++)
122  __raw_writeb(exynos4_sataphy_comlane[i].val,
123  phy_base + (COM_LANE + exynos4_sataphy_comlane[i].reg) * 4);
124 
125  __raw_writeb(0x07, phy_base);
126 
127  ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
128  ctrl0 |= SATA_CTRL0_PHY_CMU_RST_N;
129  __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
130 
131  if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS,
132  SATA_PHY_STATUS_CMU_OK) < 0) {
133  printk(KERN_ERR "PHY CMU not ready\n");
134  return -EBUSY;
135  }
136 
137  __raw_writeb(0x03, phy_base + (COM_LANE * 4));
138 
139  ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
140  ctrl0 |= SATA_CTRL0_M_PHY_LN_RST_N;
141  __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
142 
143  if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS,
145  printk(KERN_ERR "PHY LANE not ready\n");
146  return -EBUSY;
147  }
148 
149  ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
150  ctrl0 |= SATA_CTRL0_M_PHY_CAL;
151  __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
152 
153  return 0;
154 }
155 
156 static int exynos4_ahci_init(struct device *dev, void __iomem *mmio)
157 {
158  struct clk *clk_sata, *clk_sataphy, *clk_sclk_sata;
159  int val, ret;
160 
161  phy_base = ioremap(EXYNOS4_PA_SATAPHY, SZ_64K);
162  if (!phy_base) {
163  dev_err(dev, "failed to allocate memory for SATA PHY\n");
164  return -ENOMEM;
165  }
166 
168  if (!phy_ctrl) {
169  dev_err(dev, "failed to allocate memory for SATA PHY CTRL\n");
170  ret = -ENOMEM;
171  goto err1;
172  }
173 
174  clk_sata = clk_get(dev, "sata");
175  if (IS_ERR(clk_sata)) {
176  dev_err(dev, "failed to get sata clock\n");
177  ret = PTR_ERR(clk_sata);
178  clk_sata = NULL;
179  goto err2;
180 
181  }
182  clk_enable(clk_sata);
183 
184  clk_sataphy = clk_get(dev, "sataphy");
185  if (IS_ERR(clk_sataphy)) {
186  dev_err(dev, "failed to get sataphy clock\n");
187  ret = PTR_ERR(clk_sataphy);
188  clk_sataphy = NULL;
189  goto err3;
190  }
191  clk_enable(clk_sataphy);
192 
193  clk_sclk_sata = clk_get(dev, "sclk_sata");
194  if (IS_ERR(clk_sclk_sata)) {
195  dev_err(dev, "failed to get sclk_sata\n");
196  ret = PTR_ERR(clk_sclk_sata);
197  clk_sclk_sata = NULL;
198  goto err4;
199  }
200  clk_enable(clk_sclk_sata);
201  clk_set_rate(clk_sclk_sata, SCLK_SATA_FREQ);
202 
204 
205  /* Enable PHY link control */
208  __raw_writel(val, phy_ctrl + SATA_CTRL1);
209 
210  /* Set communication speed as 3Gbps and enable PHY power */
213  __raw_writel(val, phy_ctrl + SATA_CTRL0);
214 
215  /* Port0 is available */
216  __raw_writel(0x1, mmio + HOST_PORTS_IMPL);
217 
218  return ahci_phy_init(mmio);
219 
220 err4:
221  clk_disable(clk_sataphy);
222  clk_put(clk_sataphy);
223 err3:
224  clk_disable(clk_sata);
225  clk_put(clk_sata);
226 err2:
227  iounmap(phy_ctrl);
228 err1:
229  iounmap(phy_base);
230 
231  return ret;
232 }
233 
234 static struct ahci_platform_data exynos4_ahci_pdata = {
235  .init = exynos4_ahci_init,
236 };
237 
238 static struct resource exynos4_ahci_resource[] = {
241 };
242 
243 static u64 exynos4_ahci_dmamask = DMA_BIT_MASK(32);
244 
246  .name = "ahci",
247  .id = -1,
248  .resource = exynos4_ahci_resource,
249  .num_resources = ARRAY_SIZE(exynos4_ahci_resource),
250  .dev = {
251  .platform_data = &exynos4_ahci_pdata,
252  .dma_mask = &exynos4_ahci_dmamask,
253  .coherent_dma_mask = DMA_BIT_MASK(32),
254  },
255 };