|
Linux Kernel
3.7.1
|
All Data Structures Namespaces Files Functions Variables Typedefs Enumerations Enumerator Macros Groups Pages
|
Linux Kernel
3.7.1
|
#include <mach/bitfield.h>Go to the source code of this file.
Macros | |
| #define | U2DCR (0x0000) /* U2D Control Register */ |
| #define | U2DCR_NDC (1 << 31) /* NAK During Config */ |
| #define | U2DCR_HSTC (0x7 << 28) /* High Speed Timeout Calibration */ |
| #define | U2DCR_SPEOREN (1 << 27) /* Short Packet EOR INTR generation Enable */ |
| #define | U2DCR_FSTC (0x7 << 24) /* Full Speed Timeout Calibration */ |
| #define | U2DCR_UCLKOVR (1 << 22) /* UTM Clock Override */ |
| #define | U2DCR_ABP (1 << 21) /* Application Bus Power */ |
| #define | U2DCR_ADD (1 << 20) /* Application Device Disconnect */ |
| #define | U2DCR_CC (1 << 19) /* Configuration Change */ |
| #define | U2DCR_HS (1 << 18) /* High Speed USB Detection */ |
| #define | U2DCR_SMAC (1 << 17) /* Switch Endpoint Memory to Active Configuration */ |
| #define | U2DCR_DWRE (1 << 16) /* Device Remote Wake-up Feature */ |
| #define | U2DCR_ACN (0xf << 12) /* Active U2D Configuration Number */ |
| #define | U2DCR_AIN (0xf << 8) /* Active U2D Interface Number */ |
| #define | U2DCR_AAISN (0xf << 4) /* Active U2D Alternate Interface Setting Number */ |
| #define | U2DCR_EMCE (1 << 3) /* Endpoint Memory Configuration Error */ |
| #define | U2DCR_UDR (1 << 2) /* U2D Resume */ |
| #define | U2DCR_UDA (1 << 1) /* U2D Active */ |
| #define | U2DCR_UDE (1 << 0) /* U2D Enable */ |
| #define | U2DICR (0x0004) /* U2D Interrupt Control Register */ |
| #define | U2DISR (0x000C) /* U2D Interrupt Status Register */ |
| #define | U2DINT_CC (1 << 31) /* Interrupt - Configuration Change */ |
| #define | U2DINT_SOF (1 << 30) /* Interrupt - SOF */ |
| #define | U2DINT_USOF (1 << 29) /* Interrupt - micro SOF */ |
| #define | U2DINT_RU (1 << 28) /* Interrupt - Resume */ |
| #define | U2DINT_SU (1 << 27) /* Interrupt - Suspend */ |
| #define | U2DINT_RS (1 << 26) /* Interrupt - Reset */ |
| #define | U2DINT_DPE (1 << 25) /* Interrupt - Data Packet Error */ |
| #define | U2DINT_FIFOERR (0x4) /* Interrupt - endpoint FIFO error */ |
| #define | U2DINT_PACKETCMP (0x2) /* Interrupt - endpoint packet complete */ |
| #define | U2DINT_SPACKETCMP (0x1) /* Interrupt - endpoint short packet complete */ |
| #define | U2DFNR (0x0014) /* U2D Frame Number Register */ |
| #define | U2DINT(n, intr) (((intr) & 0x07) << (((n) & 0x07) * 3)) |
| #define | U2DICR2 (0x0008) /* U2D Interrupt Control Register 2 */ |
| #define | U2DISR2 (0x0010) /* U2D Interrupt Status Register 2 */ |
| #define | U2DOTGCR (0x0020) /* U2D OTG Control Register */ |
| #define | U2DOTGCR_OTGEN (1 << 31) /* On-The-Go Enable */ |
| #define | U2DOTGCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation Protocal Port Support */ |
| #define | U2DOTGCR_AHNP (1 << 29) /* A-device Host Negotiation Protocal Support */ |
| #define | U2DOTGCR_BHNP (1 << 28) /* B-device Host Negotiation Protocal Enable */ |
| #define | U2DOTGCR_CKAF (1 << 5) /* Carkit Mode Alternate Function Select */ |
| #define | U2DOTGCR_UTMID (1 << 4) /* UTMI Interface Disable */ |
| #define | U2DOTGCR_ULAF (1 << 3) /* ULPI Mode Alternate Function Select */ |
| #define | U2DOTGCR_SMAF (1 << 2) /* Serial Mode Alternate Function Select */ |
| #define | U2DOTGCR_RTSM (1 << 1) /* Return to Synchronous Mode (ULPI Mode) */ |
| #define | U2DOTGCR_ULE (1 << 0) /* ULPI Wrapper Enable */ |
| #define | U2DOTGICR (0x0024) /* U2D OTG Interrupt Control Register */ |
| #define | U2DOTGISR (0x0028) /* U2D OTG Interrupt Status Register */ |
| #define | U2DOTGINT_SF (1 << 17) /* OTG Set Feature Command Received */ |
| #define | U2DOTGINT_SI (1 << 16) /* OTG Interrupt */ |
| #define | U2DOTGINT_RLS1 (1 << 14) /* RXCMD Linestate[1] Change Interrupt Rise */ |
| #define | U2DOTGINT_RLS0 (1 << 13) /* RXCMD Linestate[0] Change Interrupt Rise */ |
| #define | U2DOTGINT_RID (1 << 12) /* RXCMD OTG ID Change Interrupt Rise */ |
| #define | U2DOTGINT_RSE (1 << 11) /* RXCMD OTG Session End Interrupt Rise */ |
| #define | U2DOTGINT_RSV (1 << 10) /* RXCMD OTG Session Valid Interrupt Rise */ |
| #define | U2DOTGINT_RVV (1 << 9) /* RXCMD OTG Vbus Valid Interrupt Rise */ |
| #define | U2DOTGINT_RCK (1 << 8) /* RXCMD Carkit Interrupt Rise */ |
| #define | U2DOTGINT_FLS1 (1 << 6) /* RXCMD Linestate[1] Change Interrupt Fall */ |
| #define | U2DOTGINT_FLS0 (1 << 5) /* RXCMD Linestate[0] Change Interrupt Fall */ |
| #define | U2DOTGINT_FID (1 << 4) /* RXCMD OTG ID Change Interrupt Fall */ |
| #define | U2DOTGINT_FSE (1 << 3) /* RXCMD OTG Session End Interrupt Fall */ |
| #define | U2DOTGINT_FSV (1 << 2) /* RXCMD OTG Session Valid Interrupt Fall */ |
| #define | U2DOTGINT_FVV (1 << 1) /* RXCMD OTG Vbus Valid Interrupt Fall */ |
| #define | U2DOTGINT_FCK (1 << 0) /* RXCMD Carkit Interrupt Fall */ |
| #define | U2DOTGUSR (0x002C) /* U2D OTG ULPI Status Register */ |
| #define | U2DOTGUSR_LPA (1 << 31) /* ULPI Low Power Mode Active */ |
| #define | U2DOTGUSR_S6A (1 << 30) /* ULPI Serial Mode (6-pin) Active */ |
| #define | U2DOTGUSR_S3A (1 << 29) /* ULPI Serial Mode (3-pin) Active */ |
| #define | U2DOTGUSR_CKA (1 << 28) /* ULPI Car Kit Mode Active */ |
| #define | U2DOTGUSR_LS1 (1 << 6) /* RXCMD Linestate 1 Status */ |
| #define | U2DOTGUSR_LS0 (1 << 5) /* RXCMD Linestate 0 Status */ |
| #define | U2DOTGUSR_ID (1 << 4) /* OTG IDGnd Status */ |
| #define | U2DOTGUSR_SE (1 << 3) /* OTG Session End Status */ |
| #define | U2DOTGUSR_SV (1 << 2) /* OTG Session Valid Status */ |
| #define | U2DOTGUSR_VV (1 << 1) /* OTG Vbus Valid Status */ |
| #define | U2DOTGUSR_CK (1 << 0) /* Carkit Interrupt Status */ |
| #define | U2DOTGUCR (0x0030) /* U2D OTG ULPI Control Register */ |
| #define | U2DOTGUCR_RUN (1 << 25) /* RUN */ |
| #define | U2DOTGUCR_RNW (1 << 24) /* Read or Write operation */ |
| #define | U2DOTGUCR_ADDR (0x3f << 16) /* Address of the ULPI PHY register */ |
| #define | U2DOTGUCR_WDATA (0xff << 8) /* The data for a WRITE command */ |
| #define | U2DOTGUCR_RDATA (0xff << 0) /* The data for a READ command */ |
| #define | U2DP3CR (0x0034) /* U2D Port 3 Control Register */ |
| #define | U2DP3CR_P2SS (0x3 << 8) /* Host Port 2 Serial Mode Select */ |
| #define | U2DP3CR_P3SS (0x7 << 4) /* Host Port 3 Serial Mode Select */ |
| #define | U2DP3CR_VPVMBEN (0x1 << 2) /* Host Port 3 Vp/Vm Block Enable */ |
| #define | U2DP3CR_CFG (0x3 << 0) /* Host Port 3 Configuration */ |
| #define | U2DCSR0 (0x0100) /* U2D Control/Status Register - Endpoint 0 */ |
| #define | U2DCSR0_IPA (1 << 8) /* IN Packet Adjusted */ |
| #define | U2DCSR0_SA (1 << 7) /* SETUP Active */ |
| #define | U2DCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */ |
| #define | U2DCSR0_FST (1 << 5) /* Force Stall */ |
| #define | U2DCSR0_SST (1 << 4) /* Send Stall */ |
| #define | U2DCSR0_DME (1 << 3) /* DMA Enable */ |
| #define | U2DCSR0_FTF (1 << 2) /* Flush Transmit FIFO */ |
| #define | U2DCSR0_IPR (1 << 1) /* IN Packet Ready */ |
| #define | U2DCSR0_OPC (1 << 0) /* OUT Packet Complete */ |
| #define | U2DCSR(x) (0x0100 + ((x) << 2)) /* U2D Control/Status Register - Endpoint x */ |
| #define | U2DCSR_BF (1 << 10) /* Buffer Full, for OUT eps */ |
| #define | U2DCSR_BE (1 << 10) /* Buffer Empty, for IN eps */ |
| #define | U2DCSR_DPE (1 << 9) /* Data Packet Error, for ISO eps only */ |
| #define | U2DCSR_FEF (1 << 8) /* Flush Endpoint FIFO */ |
| #define | U2DCSR_SP (1 << 7) /* Short Packet Control/Status, for OUT eps only, readonly */ |
| #define | U2DCSR_BNE (1 << 6) /* Buffer Not Empty, for OUT eps */ |
| #define | U2DCSR_BNF (1 << 6) /* Buffer Not Full, for IN eps */ |
| #define | U2DCSR_FST (1 << 5) /* Force STALL, write 1 set */ |
| #define | U2DCSR_SST (1 << 4) /* Sent STALL, write 1 clear */ |
| #define | U2DCSR_DME (1 << 3) /* DMA Enable */ |
| #define | U2DCSR_TRN (1 << 2) /* Tx/Rx NAK, write 1 clear */ |
| #define | U2DCSR_PC (1 << 1) /* Packet Complete, write 1 clear */ |
| #define | U2DCSR_FS (1 << 0) /* FIFO needs Service */ |
| #define | U2DBCR0 (0x0200) /* U2D Byte Count Register - Endpoint 0 */ |
| #define | U2DBCR(x) (0x0200 + ((x) << 2)) /* U2D Byte Count Register - Endpoint x */ |
| #define | U2DDR0 (0x0300) /* U2D Data Register - Endpoint 0 */ |
| #define | U2DEPCR(x) (0x0400 + ((x) << 2)) /* U2D Configuration Register - Endpoint x */ |
| #define | U2DEPCR_EE (1 << 0) /* Endpoint Enable */ |
| #define | U2DEPCR_BS_MASK (0x3FE) /* Buffer Size, BS*8=FIFO size, max 8184B = 8KB */ |
| #define | U2DSCA (0x0500) /* U2D Setup Command Address */ |
| #define | U2DSCA_VALUE (0x0120) |
| #define | U2DEN0 (0x0504) /* U2D Endpoint Information Register - Endpoint 0 */ |
| #define | U2DEN(x) (0x0504 + ((x) << 2)) /* U2D Endpoint Information Register - Endpoint x */ |
| #define | U2DMACSR0 (0x1000) /* U2DMA Control/Status Register - Channel 0 */ |
| #define | U2DMACSR(x) (0x1000 + ((x) << 2)) /* U2DMA Control/Status Register - Channel x */ |
| #define | U2DMACSR_RUN (1 << 31) /* Run Bit (read / write) */ |
| #define | U2DMACSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ |
| #define | U2DMACSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ |
| #define | U2DMACSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ |
| #define | U2DMACSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ |
| #define | U2DMACSR_RASIRQEN (1 << 23) /* Request After Cnannel Stopped Interrupt Enable */ |
| #define | U2DMACSR_MASKRUN (1 << 22) /* Mask Run */ |
| #define | U2DMACSR_SCEMC (3 << 18) /* System Bus Split Completion Error Message Class */ |
| #define | U2DMACSR_SCEMI (0x1f << 13) /* System Bus Split Completion Error Message Index */ |
| #define | U2DMACSR_BUSERRTYPE (7 << 10) /* PX Bus Error Type */ |
| #define | U2DMACSR_EORINTR (1 << 9) /* End Of Receive */ |
| #define | U2DMACSR_REQPEND (1 << 8) /* Request Pending */ |
| #define | U2DMACSR_RASINTR (1 << 4) /* Request After Channel Stopped (read / write 1 clear) */ |
| #define | U2DMACSR_STOPINTR (1 << 3) /* Stop Interrupt (read only) */ |
| #define | U2DMACSR_ENDINTR (1 << 2) /* End Interrupt (read / write 1 clear) */ |
| #define | U2DMACSR_STARTINTR (1 << 1) /* Start Interrupt (read / write 1 clear) */ |
| #define | U2DMACSR_BUSERRINTR (1 << 0) /* Bus Error Interrupt (read / write 1 clear) */ |
| #define | U2DMACR (0x1080) /* U2DMA Control Register */ |
| #define | U2DMAINT (0x10F0) /* U2DMA Interrupt Register */ |
| #define | U2DMABR0 (0x1100) /* U2DMA Branch Register - Channel 0 */ |
| #define | U2DMABR(x) (0x1100 + (x) << 2) /* U2DMA Branch Register - Channel x */ |
| #define | U2DMADADR0 (0x1200) /* U2DMA Descriptor Address Register - Channel 0 */ |
| #define | U2DMADADR(x) (0x1200 + (x) * 0x10) /* U2DMA Descriptor Address Register - Channel x */ |
| #define | U2DMADADR_STOP (1U << 0) |
| #define | U2DMASADR0 (0x1204) /* U2DMA Source Address Register - Channel 0 */ |
| #define | U2DMASADR(x) (0x1204 + (x) * 0x10) /* U2DMA Source Address Register - Channel x */ |
| #define | U2DMATADR0 (0x1208) /* U2DMA Target Address Register - Channel 0 */ |
| #define | U2DMATADR(x) (0x1208 + (x) * 0x10) /* U2DMA Target Address Register - Channel x */ |
| #define | U2DMACMDR0 (0x120C) /* U2DMA Command Address Register - Channel 0 */ |
| #define | U2DMACMDR(x) (0x120C + (x) * 0x10) /* U2DMA Command Address Register - Channel x */ |
| #define | U2DMACMDR_XFRDIS (1 << 31) /* Transfer Direction */ |
| #define | U2DMACMDR_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ |
| #define | U2DMACMDR_ENDIRQEN (1 << 21) /* End Interrupt Enable */ |
| #define | U2DMACMDR_PACKCOMP (1 << 13) /* Packet Complete */ |
| #define | U2DMACMDR_LEN (0x07ff) /* length mask (max = 2K - 1) */ |
| #define U2DBCR | ( | x | ) | (0x0200 + ((x) << 2)) /* U2D Byte Count Register - Endpoint x */ |
Definition at line 140 of file regs-u2d.h.
| #define U2DBCR0 (0x0200) /* U2D Byte Count Register - Endpoint 0 */ |
Definition at line 139 of file regs-u2d.h.
| #define U2DCR (0x0000) /* U2D Control Register */ |
Definition at line 9 of file regs-u2d.h.
| #define U2DCR_AAISN (0xf << 4) /* Active U2D Alternate Interface Setting Number */ |
Definition at line 23 of file regs-u2d.h.
| #define U2DCR_ABP (1 << 21) /* Application Bus Power */ |
Definition at line 15 of file regs-u2d.h.
| #define U2DCR_ACN (0xf << 12) /* Active U2D Configuration Number */ |
Definition at line 21 of file regs-u2d.h.
| #define U2DCR_ADD (1 << 20) /* Application Device Disconnect */ |
Definition at line 16 of file regs-u2d.h.
| #define U2DCR_AIN (0xf << 8) /* Active U2D Interface Number */ |
Definition at line 22 of file regs-u2d.h.
| #define U2DCR_CC (1 << 19) /* Configuration Change */ |
Definition at line 17 of file regs-u2d.h.
Definition at line 20 of file regs-u2d.h.
| #define U2DCR_EMCE (1 << 3) /* Endpoint Memory Configuration Error */ |
Definition at line 24 of file regs-u2d.h.
| #define U2DCR_FSTC (0x7 << 24) /* Full Speed Timeout Calibration */ |
Definition at line 13 of file regs-u2d.h.
| #define U2DCR_HS (1 << 18) /* High Speed USB Detection */ |
Definition at line 18 of file regs-u2d.h.
| #define U2DCR_HSTC (0x7 << 28) /* High Speed Timeout Calibration */ |
Definition at line 11 of file regs-u2d.h.
Definition at line 10 of file regs-u2d.h.
| #define U2DCR_SMAC (1 << 17) /* Switch Endpoint Memory to Active Configuration */ |
Definition at line 19 of file regs-u2d.h.
| #define U2DCR_SPEOREN (1 << 27) /* Short Packet EOR INTR generation Enable */ |
Definition at line 12 of file regs-u2d.h.
| #define U2DCR_UCLKOVR (1 << 22) /* UTM Clock Override */ |
Definition at line 14 of file regs-u2d.h.
| #define U2DCR_UDA (1 << 1) /* U2D Active */ |
Definition at line 26 of file regs-u2d.h.
| #define U2DCR_UDE (1 << 0) /* U2D Enable */ |
Definition at line 27 of file regs-u2d.h.
| #define U2DCR_UDR (1 << 2) /* U2D Resume */ |
Definition at line 25 of file regs-u2d.h.
| #define U2DCSR | ( | x | ) | (0x0100 + ((x) << 2)) /* U2D Control/Status Register - Endpoint x */ |
Definition at line 124 of file regs-u2d.h.
| #define U2DCSR0 (0x0100) /* U2D Control/Status Register - Endpoint 0 */ |
Definition at line 113 of file regs-u2d.h.
| #define U2DCSR0_DME (1 << 3) /* DMA Enable */ |
Definition at line 119 of file regs-u2d.h.
| #define U2DCSR0_FST (1 << 5) /* Force Stall */ |
Definition at line 117 of file regs-u2d.h.
Definition at line 120 of file regs-u2d.h.
Definition at line 114 of file regs-u2d.h.
Definition at line 121 of file regs-u2d.h.
Definition at line 122 of file regs-u2d.h.
| #define U2DCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */ |
Definition at line 116 of file regs-u2d.h.
| #define U2DCSR0_SA (1 << 7) /* SETUP Active */ |
Definition at line 115 of file regs-u2d.h.
| #define U2DCSR0_SST (1 << 4) /* Send Stall */ |
Definition at line 118 of file regs-u2d.h.
Definition at line 126 of file regs-u2d.h.
Definition at line 125 of file regs-u2d.h.
Definition at line 130 of file regs-u2d.h.
Definition at line 131 of file regs-u2d.h.
| #define U2DCSR_DME (1 << 3) /* DMA Enable */ |
Definition at line 134 of file regs-u2d.h.
Definition at line 127 of file regs-u2d.h.
| #define U2DCSR_FEF (1 << 8) /* Flush Endpoint FIFO */ |
Definition at line 128 of file regs-u2d.h.
Definition at line 137 of file regs-u2d.h.
Definition at line 132 of file regs-u2d.h.
Definition at line 136 of file regs-u2d.h.
Definition at line 129 of file regs-u2d.h.
Definition at line 133 of file regs-u2d.h.
Definition at line 135 of file regs-u2d.h.
| #define U2DDR0 (0x0300) /* U2D Data Register - Endpoint 0 */ |
Definition at line 142 of file regs-u2d.h.
| #define U2DEN | ( | x | ) | (0x0504 + ((x) << 2)) /* U2D Endpoint Information Register - Endpoint x */ |
Definition at line 152 of file regs-u2d.h.
| #define U2DEN0 (0x0504) /* U2D Endpoint Information Register - Endpoint 0 */ |
Definition at line 151 of file regs-u2d.h.
| #define U2DEPCR | ( | x | ) | (0x0400 + ((x) << 2)) /* U2D Configuration Register - Endpoint x */ |
Definition at line 144 of file regs-u2d.h.
| #define U2DEPCR_BS_MASK (0x3FE) /* Buffer Size, BS*8=FIFO size, max 8184B = 8KB */ |
Definition at line 146 of file regs-u2d.h.
| #define U2DEPCR_EE (1 << 0) /* Endpoint Enable */ |
Definition at line 145 of file regs-u2d.h.
| #define U2DFNR (0x0014) /* U2D Frame Number Register */ |
Definition at line 42 of file regs-u2d.h.
| #define U2DICR (0x0004) /* U2D Interrupt Control Register */ |
Definition at line 29 of file regs-u2d.h.
| #define U2DICR2 (0x0008) /* U2D Interrupt Control Register 2 */ |
Definition at line 45 of file regs-u2d.h.
Definition at line 44 of file regs-u2d.h.
| #define U2DINT_CC (1 << 31) /* Interrupt - Configuration Change */ |
Definition at line 31 of file regs-u2d.h.
Definition at line 37 of file regs-u2d.h.
| #define U2DINT_FIFOERR (0x4) /* Interrupt - endpoint FIFO error */ |
Definition at line 38 of file regs-u2d.h.
| #define U2DINT_PACKETCMP (0x2) /* Interrupt - endpoint packet complete */ |
Definition at line 39 of file regs-u2d.h.
| #define U2DINT_RS (1 << 26) /* Interrupt - Reset */ |
Definition at line 36 of file regs-u2d.h.
| #define U2DINT_RU (1 << 28) /* Interrupt - Resume */ |
Definition at line 34 of file regs-u2d.h.
| #define U2DINT_SOF (1 << 30) /* Interrupt - SOF */ |
Definition at line 32 of file regs-u2d.h.
| #define U2DINT_SPACKETCMP (0x1) /* Interrupt - endpoint short packet complete */ |
Definition at line 40 of file regs-u2d.h.
| #define U2DINT_SU (1 << 27) /* Interrupt - Suspend */ |
Definition at line 35 of file regs-u2d.h.
| #define U2DINT_USOF (1 << 29) /* Interrupt - micro SOF */ |
Definition at line 33 of file regs-u2d.h.
| #define U2DISR (0x000C) /* U2D Interrupt Status Register */ |
Definition at line 30 of file regs-u2d.h.
| #define U2DISR2 (0x0010) /* U2D Interrupt Status Register 2 */ |
Definition at line 46 of file regs-u2d.h.
| #define U2DMABR | ( | x | ) | (0x1100 + (x) << 2) /* U2DMA Branch Register - Channel x */ |
Definition at line 179 of file regs-u2d.h.
| #define U2DMABR0 (0x1100) /* U2DMA Branch Register - Channel 0 */ |
Definition at line 178 of file regs-u2d.h.
| #define U2DMACMDR | ( | x | ) | (0x120C + (x) * 0x10) /* U2DMA Command Address Register - Channel x */ |
Definition at line 192 of file regs-u2d.h.
| #define U2DMACMDR0 (0x120C) /* U2DMA Command Address Register - Channel 0 */ |
Definition at line 191 of file regs-u2d.h.
| #define U2DMACMDR_ENDIRQEN (1 << 21) /* End Interrupt Enable */ |
Definition at line 196 of file regs-u2d.h.
| #define U2DMACMDR_LEN (0x07ff) /* length mask (max = 2K - 1) */ |
Definition at line 198 of file regs-u2d.h.
| #define U2DMACMDR_PACKCOMP (1 << 13) /* Packet Complete */ |
Definition at line 197 of file regs-u2d.h.
| #define U2DMACMDR_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ |
Definition at line 195 of file regs-u2d.h.
| #define U2DMACMDR_XFRDIS (1 << 31) /* Transfer Direction */ |
Definition at line 194 of file regs-u2d.h.
| #define U2DMACR (0x1080) /* U2DMA Control Register */ |
Definition at line 175 of file regs-u2d.h.
| #define U2DMACSR | ( | x | ) | (0x1000 + ((x) << 2)) /* U2DMA Control/Status Register - Channel x */ |
Definition at line 156 of file regs-u2d.h.
| #define U2DMACSR0 (0x1000) /* U2DMA Control/Status Register - Channel 0 */ |
Definition at line 155 of file regs-u2d.h.
Definition at line 173 of file regs-u2d.h.
Definition at line 166 of file regs-u2d.h.
Definition at line 171 of file regs-u2d.h.
| #define U2DMACSR_EORINTR (1 << 9) /* End Of Receive */ |
Definition at line 167 of file regs-u2d.h.
Definition at line 159 of file regs-u2d.h.
| #define U2DMACSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ |
Definition at line 160 of file regs-u2d.h.
| #define U2DMACSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ |
Definition at line 161 of file regs-u2d.h.
| #define U2DMACSR_MASKRUN (1 << 22) /* Mask Run */ |
Definition at line 163 of file regs-u2d.h.
Definition at line 169 of file regs-u2d.h.
| #define U2DMACSR_RASIRQEN (1 << 23) /* Request After Cnannel Stopped Interrupt Enable */ |
Definition at line 162 of file regs-u2d.h.
| #define U2DMACSR_REQPEND (1 << 8) /* Request Pending */ |
Definition at line 168 of file regs-u2d.h.
Definition at line 157 of file regs-u2d.h.
| #define U2DMACSR_SCEMC (3 << 18) /* System Bus Split Completion Error Message Class */ |
Definition at line 164 of file regs-u2d.h.
| #define U2DMACSR_SCEMI (0x1f << 13) /* System Bus Split Completion Error Message Index */ |
Definition at line 165 of file regs-u2d.h.
Definition at line 172 of file regs-u2d.h.
| #define U2DMACSR_STOPINTR (1 << 3) /* Stop Interrupt (read only) */ |
Definition at line 170 of file regs-u2d.h.
Definition at line 158 of file regs-u2d.h.
| #define U2DMADADR | ( | x | ) | (0x1200 + (x) * 0x10) /* U2DMA Descriptor Address Register - Channel x */ |
Definition at line 182 of file regs-u2d.h.
| #define U2DMADADR0 (0x1200) /* U2DMA Descriptor Address Register - Channel 0 */ |
Definition at line 181 of file regs-u2d.h.
| #define U2DMADADR_STOP (1U << 0) |
Definition at line 184 of file regs-u2d.h.
| #define U2DMAINT (0x10F0) /* U2DMA Interrupt Register */ |
Definition at line 176 of file regs-u2d.h.
| #define U2DMASADR | ( | x | ) | (0x1204 + (x) * 0x10) /* U2DMA Source Address Register - Channel x */ |
Definition at line 187 of file regs-u2d.h.
| #define U2DMASADR0 (0x1204) /* U2DMA Source Address Register - Channel 0 */ |
Definition at line 186 of file regs-u2d.h.
| #define U2DMATADR | ( | x | ) | (0x1208 + (x) * 0x10) /* U2DMA Target Address Register - Channel x */ |
Definition at line 189 of file regs-u2d.h.
| #define U2DMATADR0 (0x1208) /* U2DMA Target Address Register - Channel 0 */ |
Definition at line 188 of file regs-u2d.h.
| #define U2DOTGCR (0x0020) /* U2D OTG Control Register */ |
Definition at line 48 of file regs-u2d.h.
Definition at line 50 of file regs-u2d.h.
Definition at line 51 of file regs-u2d.h.
Definition at line 52 of file regs-u2d.h.
| #define U2DOTGCR_CKAF (1 << 5) /* Carkit Mode Alternate Function Select */ |
Definition at line 60 of file regs-u2d.h.
| #define U2DOTGCR_OTGEN (1 << 31) /* On-The-Go Enable */ |
Definition at line 49 of file regs-u2d.h.
Definition at line 64 of file regs-u2d.h.
| #define U2DOTGCR_SMAF (1 << 2) /* Serial Mode Alternate Function Select */ |
Definition at line 63 of file regs-u2d.h.
| #define U2DOTGCR_ULAF (1 << 3) /* ULPI Mode Alternate Function Select */ |
Definition at line 62 of file regs-u2d.h.
| #define U2DOTGCR_ULE (1 << 0) /* ULPI Wrapper Enable */ |
Definition at line 65 of file regs-u2d.h.
| #define U2DOTGCR_UTMID (1 << 4) /* UTMI Interface Disable */ |
Definition at line 61 of file regs-u2d.h.
| #define U2DOTGICR (0x0024) /* U2D OTG Interrupt Control Register */ |
Definition at line 67 of file regs-u2d.h.
| #define U2DOTGINT_FCK (1 << 0) /* RXCMD Carkit Interrupt Fall */ |
Definition at line 85 of file regs-u2d.h.
Definition at line 81 of file regs-u2d.h.
| #define U2DOTGINT_FLS0 (1 << 5) /* RXCMD Linestate[0] Change Interrupt Fall */ |
Definition at line 80 of file regs-u2d.h.
| #define U2DOTGINT_FLS1 (1 << 6) /* RXCMD Linestate[1] Change Interrupt Fall */ |
Definition at line 79 of file regs-u2d.h.
| #define U2DOTGINT_FSE (1 << 3) /* RXCMD OTG Session End Interrupt Fall */ |
Definition at line 82 of file regs-u2d.h.
| #define U2DOTGINT_FSV (1 << 2) /* RXCMD OTG Session Valid Interrupt Fall */ |
Definition at line 83 of file regs-u2d.h.
| #define U2DOTGINT_FVV (1 << 1) /* RXCMD OTG Vbus Valid Interrupt Fall */ |
Definition at line 84 of file regs-u2d.h.
| #define U2DOTGINT_RCK (1 << 8) /* RXCMD Carkit Interrupt Rise */ |
Definition at line 78 of file regs-u2d.h.
Definition at line 74 of file regs-u2d.h.
| #define U2DOTGINT_RLS0 (1 << 13) /* RXCMD Linestate[0] Change Interrupt Rise */ |
Definition at line 73 of file regs-u2d.h.
| #define U2DOTGINT_RLS1 (1 << 14) /* RXCMD Linestate[1] Change Interrupt Rise */ |
Definition at line 72 of file regs-u2d.h.
| #define U2DOTGINT_RSE (1 << 11) /* RXCMD OTG Session End Interrupt Rise */ |
Definition at line 75 of file regs-u2d.h.
| #define U2DOTGINT_RSV (1 << 10) /* RXCMD OTG Session Valid Interrupt Rise */ |
Definition at line 76 of file regs-u2d.h.
| #define U2DOTGINT_RVV (1 << 9) /* RXCMD OTG Vbus Valid Interrupt Rise */ |
Definition at line 77 of file regs-u2d.h.
Definition at line 70 of file regs-u2d.h.
| #define U2DOTGINT_SI (1 << 16) /* OTG Interrupt */ |
Definition at line 71 of file regs-u2d.h.
| #define U2DOTGISR (0x0028) /* U2D OTG Interrupt Status Register */ |
Definition at line 68 of file regs-u2d.h.
| #define U2DOTGUCR (0x0030) /* U2D OTG ULPI Control Register */ |
Definition at line 100 of file regs-u2d.h.
| #define U2DOTGUCR_ADDR (0x3f << 16) /* Address of the ULPI PHY register */ |
Definition at line 103 of file regs-u2d.h.
| #define U2DOTGUCR_RDATA (0xff << 0) /* The data for a READ command */ |
Definition at line 105 of file regs-u2d.h.
Definition at line 102 of file regs-u2d.h.
| #define U2DOTGUCR_RUN (1 << 25) /* RUN */ |
Definition at line 101 of file regs-u2d.h.
| #define U2DOTGUCR_WDATA (0xff << 8) /* The data for a WRITE command */ |
Definition at line 104 of file regs-u2d.h.
| #define U2DOTGUSR (0x002C) /* U2D OTG ULPI Status Register */ |
Definition at line 87 of file regs-u2d.h.
| #define U2DOTGUSR_CK (1 << 0) /* Carkit Interrupt Status */ |
Definition at line 98 of file regs-u2d.h.
| #define U2DOTGUSR_CKA (1 << 28) /* ULPI Car Kit Mode Active */ |
Definition at line 91 of file regs-u2d.h.
Definition at line 94 of file regs-u2d.h.
Definition at line 88 of file regs-u2d.h.
| #define U2DOTGUSR_LS0 (1 << 5) /* RXCMD Linestate 0 Status */ |
Definition at line 93 of file regs-u2d.h.
| #define U2DOTGUSR_LS1 (1 << 6) /* RXCMD Linestate 1 Status */ |
Definition at line 92 of file regs-u2d.h.
Definition at line 90 of file regs-u2d.h.
Definition at line 89 of file regs-u2d.h.
Definition at line 95 of file regs-u2d.h.
Definition at line 96 of file regs-u2d.h.
Definition at line 97 of file regs-u2d.h.
| #define U2DP3CR (0x0034) /* U2D Port 3 Control Register */ |
Definition at line 107 of file regs-u2d.h.
| #define U2DP3CR_CFG (0x3 << 0) /* Host Port 3 Configuration */ |
Definition at line 111 of file regs-u2d.h.
| #define U2DP3CR_P2SS (0x3 << 8) /* Host Port 2 Serial Mode Select */ |
Definition at line 108 of file regs-u2d.h.
| #define U2DP3CR_P3SS (0x7 << 4) /* Host Port 3 Serial Mode Select */ |
Definition at line 109 of file regs-u2d.h.
| #define U2DP3CR_VPVMBEN (0x1 << 2) /* Host Port 3 Vp/Vm Block Enable */ |
Definition at line 110 of file regs-u2d.h.
| #define U2DSCA (0x0500) /* U2D Setup Command Address */ |
Definition at line 148 of file regs-u2d.h.
| #define U2DSCA_VALUE (0x0120) |
Definition at line 149 of file regs-u2d.h.
1.8.2