Alerts

Control Center provides functionality for detecting anomalous events in your monitoring data and performing actions when they occur.

Concepts

Detection of anomalous events (triggering) is decoupled from the actions that should be taken when they occur.

Each time interceptor data is received by Control Center, metric values (consumption difference and latency) of the corresponding time window(s) are updated to reflect the new data. All newly updated metric values are then checked against all configured triggers to determine whether the trigger should fire or not.

Note

Interceptors can conceivably report data related to any time - alerting works across all time windows not just those near real time.

Triggers can be associated with any number of actions. When a trigger fires, it will cause all associated actions to be executed for which the max send rate of the action has not been exceeded. If the max send rate of a particular action has been exceeded, the trigger event will be added to a list associated with the action and included in the action event the next time it is executed (actions report a set of triggers, not just one).

Because of normal lag in the system, time windows close to real time will frequently have associated metric values that would be cause for concern if the time window was further behind real time. For this reason, triggers have an associated buffer value.

A triggered event that is within buffer seconds of real time will not be registered against actions immediately - when the time window ultimately moves greater than buffer seconds behind real time, any associated metric value that would still cause a trigger to be fired will be registered against any appropriate actions then.

User Interface

Overview page

The Overview page has three main sections, accessible via the sub menus at the top of the page:

  • HISTORY - Historical alert log
  • TRIGGERS - Trigger management
  • ACTIONS - Action management
../../_images/c3alertssubmenus.png

Integration page

The Integration page provides details of the alerts REST endpoint which can be used to programatically obtain historical alert information.

../../_images/c3alertsintegration.png

Trigger Management

Clicking on the triggers tab shows a summary of all configured triggers:

../../_images/c3alertstriggersoverview.png

You can edit/delete an existing trigger using the edit/delete links in this table or create a new trigger via the “+ new trigger” button on the top right of the screen.

You can also initiate creation of a new trigger by clicking on a consumer group delivery or latency monitoring chart progress indicator, and clicking “setup alert” button. This will pre-populate the new trigger form with relevant information.

../../_images/c3alertsprepopulate.png

New/Edit Trigger Form

The form for creating and editing triggers is identical. When editing, the form is pre-populated with the current trigger values.

There are three types of triggers that can be created: topics, consumer groups or brokers.

Topic

../../_images/c3alertstopictrigger.png
Trigger name
A name used to identify the trigger (for example ‘<topic name> production requests’). Uniqueness is not enforced but you should use different names to avoid confusion for all triggers.
Component type
Should be selected as Topic. If this is not the case, see the other form trigger documentation.
Cluster id
The trigger for a topic will be limited to a specific cluster id. If you require a topic to be triggered by multiple clusters, create independant triggers for each cluster.
Topic(s) name

A select list of options for matching against the value field (below). The name of the topic can Equal, Begin with, End with or Contains a specified value.

Note

For example, selecting Contains and then entering ‘topic’ into the value field will match ‘my topic’, ‘topical’, and ‘topics with data’. If Begins with is selected, the trigger will only match ‘topical’ and ‘topics with data’, not ‘my topic’.

Topics(s) name value

The name or part of a topic name to be triggered against. Works in conjunction with Topic(s) Name in order to match against one or many topics.

Note

If multiple topics match against topic name, the trigger will be per topic, not aggregate. In the case where we have two topics that Begin with ‘topic’, and we set trigger Bytes in greater than 100, any topic will fire the trigger if they get > 100 Bytes In.

Metric

The value to check for the trigger alert. The possible values for this dropdown are:

Bytes in
Amount of bytes per second coming in to a topic.
Bytes out
Amount of bytes per second going out from a topic (does not account for internal replication traffic).

Note

Prior to Kafka 0.11.0.0 the BytesOutPerSec accounted for traffic from the consumer as well as internal replication, this has been changed to only account for consumer traffic for this topic. Please adjust alerts accordingly.

Out of sync replica count
Total number of topic partition replicas in the cluster that are in sync with the leader, i.e., sum of each { topic partition * topic replication factor }
Production request count
Amount of production requests per second to a topic in a cluster.
Under replicated topic partitions
Amount of under replicated topic partitions. A use case for this metric would be wanting to know if a Kafka broker crashed while holding a specific topic partition.
Condition
The trigger will fire when Condition is true of the difference between the value of the metric being monitored and the value of the Value field. Possibly Greater than, Less than, Equal to, or Not equal to.
Value
The value to which the topic Metric is compared.

Consumer Groups

../../_images/c3alertsedittrigger.png
Trigger name
A name used to identify the trigger (for example ‘<consumer group name> under consumption’). Uniqueness is not enforced but you should use different names to avoid confusion.
Component type
Should be selected as ‘Consumer group’. If this is not the case, see the other form trigger documentation.
Consumer group name
The name of the consumer group to monitor for anomalies.
Metric
The metric to monitor. One of maximum latency (ms), average latency (ms) or consumption difference.
Condition
The trigger will fire when Condition is true of the difference between the value of the metric being monitored and the value of the Value field. Possibly Greater than, Less than, Equal to, or Not equal to.
Value
The value to which the monitored consumer group Metric is compared.
Buffer
The delay behind real time to wait until a time window is considered for triggering (refer to Concepts for more information).

Brokers

../../_images/c3alertsbroker.png
Broker clusters
The cluster(s) to look at for a specific broker metric.
Trigger name
A name used to identify the trigger (for example ‘Broker zookeeper down’). Uniqueness is not enforced but you should use different names to avoid confusion.
Broker clusters

One or many broker clusters to trigger based on conditions.

Note

If multiple clusters are selected, the trigger will be per cluster, not aggregate, but not in all cases. See below for more details.

Metric

Some of the values in Metric are triggered on a per broker basis and some are only availbale cluster wide. The selection method in Broker clusters is by cluster, but there are specific metrics in the brokers of clusters that can cause triggers.

Important

Any broker that meets the Condition below will trigger discretely

Bytes in
Number of bytes per second produced to this broker
Bytes out
Number of bytes per second fetched from this broker (does not account for internal replication traffic)

Note

Prior to Kafka 0.11.0.0 the BytesOutPerSec accounted for traffic from the consumer as well as internal replication, this has been changed to only account for consumer traffic for this broker. Please adjust alerts accordingly.

Production request latency
Latency of produce requests to this broker at the median, 95th, 99th, or 99.9th percentile (in milliseconds)
Production request count
Total number of produce requests to this broker (requests per minute)
Fetch request latency
Latency of fetch requests to this broker at the median, 95th, 99th, or 99.9th percentile (in milliseconds)

Important

Any cluster that meets the Condition below will trigger

Under replicated topic partitions

Total number of topic partitions in the cluster that are under-replicated, i.e. partition with number of in-sync replicas less than replication factor

A trigger should be created for values > 0

Offline topic partitions

Total number of topic partitions in the cluster that are offline. This can happen if the brokers with replicas are down, or if unclean leader election is disabled and the replicas are not in sync and thus none can be elected leader (may be desirable to ensure no messages are lost).

A trigger should be created for values > 0

ZooKeeper status
Are brokers able to connect to ZooKeeper? ‘Offline’ / ‘Online’ are possible values.
ZooKeeper expiration rate
rate at which brokers are experiencing ZooKeeper session expirations (number of expirations per second)
Active controller count

The number of brokers in the cluster reporting as the active controller in the last interval.

A trigger should be created for values != 1

Leader election rate
Number of partition leader elections
Unclean election count

The number of unclean partition leader elections in the cluster reported in the last interval

When unclean leader election is held among out-of-sync replicas, there is a possibility of data loss if any messages were not synced prior to the loss of the former leader. So if the number of unclean elections is greater than 0, investigate broker logs to determine why leaders were re-elected, and look for WARN or ERROR messages. Consider setting the broker configuration parameter unclean.leader.election.enable to false so that a replica outside of the set of in-sync replicas is never elected leader

A trigger should be created for values != 0

Condition
The trigger will fire when Condition is true of the difference between the value of the metric being monitored and the value of the Value field. Possibly Greater than, Less than, Equal to, Not equal to, Online, or Offline, depending on the Metric selected.
Value
The value to which the broker Metric is compared.

Actions Management

After creating a trigger, you will be given the option to go to the action management page to associate it with one or more existing actions, or if none exist, create a new action.

Before being able to send email actions you will need to enable emails, and properly config |c3-short| to communicate with your SMTP server.

At the very least you will need to set

# this enables sending mail via c3
confluent.controlcenter.mail.enabled=true
# this is the host name of your mail server
confluent.controlcenter.mail.host.name=mymail.server
# this is the port your mail server is running on
confluent.controlcenter.mail.port=25
# we also recommend setting rest.listeners explicitly as well because
# this will control the |c3-short| link that is embedded in the
# body of any alert emails
confluent.controlcenter.rest.listeners=control-center.server

Clicking on the actions tab shows a summary of all configured actions:

../../_images/c3alertsactionsoverview.png

You can edit/delete an existing action using the edit/delete links in this table or create a new action via the “+ new action” button on the top right of the screen.

New/Edit Action Form

The form for creating and editing actions is identical. When editing, the form is pre-populated with the current action values.

../../_images/c3alertseditaction.png

A description of each field follows (all fields are required):

Action name
A name for the action (for example ‘email <ops person’>). Uniqueness is not enforced, but you should use different names to avoid confusion.
Enabled/Disabled
You may wish to temporarily disable actions. You can choose whether an action is currently enabled or disabled with this field.
Triggers
One or more triggers that will cause the action to be executed (refer to Concepts for more information).
Action
The type of action to perform. Currently we only support sending emails, but in the future we may support other action types.
Recipient email address
The email address associated with this action. A message will be sent to this address each time the action is executed.
Subject
The subject line of the email associated with this action.
Max send rate
The maximum rate at which the action may be executed (refer to Concepts for more information).

Alert History

Selecting the history tab shows a table summarizing every trigger that has fired that caused an action to be executed (note: it does not list every triggered event).

../../_images/c3alertshistory.png

You can see contextual information for some items by clicking the “view” link, or in the case of broker alerts, the click will navigate to the ‘System Health’ page for further diagnostics.

../../_images/c3alertsitem.png