RigidBody2D¶
Inherits: PhysicsBody2D < CollisionObject2D < Node2D < CanvasItem < Node < Object
Category: Core
Brief Description¶
Rigid body 2D node.
Member Functions¶
Signals¶
Numeric Constants¶
- MODE_STATIC = 1 — Static mode. The body behaves like a StaticBody2D, and can only move by user code.
- MODE_KINEMATIC = 3 — Kinematic body. The body behaves like a KinematicBody2D, and can only move by user code.
- MODE_RIGID = 0 — Rigid body. This is the “natural” state of a rigid body. It is affected by forces, and can move, rotate, and be affected by user code.
- MODE_CHARACTER = 2 — Character body. This behaves like a rigid body, but can not rotate.
- CCD_MODE_DISABLED = 0 — Disables continuous collision detection. This is the fastest way to detect body collisions, but can miss small, fast-moving objects.
- CCD_MODE_CAST_RAY = 1 — Enables continuous collision detection by raycasting. It is faster than shapecasting, but less precise.
- CCD_MODE_CAST_SHAPE = 2 — Enables continuous collision detection by shapecasting. It is the slowest CCD method, and the most precise.
Description¶
Rigid body 2D node. This node is used for placing rigid bodies in the scene. It can contain a number of shapes, and also shift state between regular Rigid body, Kinematic, Character or Static.
Character mode forbids the node from being rotated. This node can have a custom force integrator function, for writing complex physics motion behavior per node.
As a warning, don’t change this node position every frame or very often. Sporadic changes work fine, but physics runs at a different granularity (fixed hz) than usual rendering (process callback) and maybe even in a separate thread, so changing this from a process loop will yield strange behavior.
Member Function Description¶
- void _integrate_forces ( Physics2DDirectBodyState state ) virtual
Called during physics processing, allowing you to read and safely modify the simulation state for the object. By default it works in addition to the usual physics behavior, but set_use_custom_integrator allows you to disable the default behavior and do fully custom force integration for a body.
Apply a positioned impulse (which will be affected by the body mass and shape). This is the equivalent of hitting a billiard ball with a cue: a force that is applied once, and only once.
- float get_angular_damp ( ) const
Return the angular damp for this body.
- float get_angular_velocity ( ) const
Return the body angular velocity. This changes by physics granularity. See set_angular_velocity.
- Vector2 get_applied_force ( ) const
Return the applied force vector.
- float get_bounce ( ) const
Return the body bounciness.
- Array get_colliding_bodies ( ) const
Return a list of the bodies colliding with this one.
- int get_continuous_collision_detection_mode ( ) const
Return whether this body is using continuous collision detection.
- float get_friction ( ) const
Return the body friction.
- float get_gravity_scale ( ) const
Return the gravity factor.
- float get_linear_damp ( ) const
Return the linear damp for this body.
- Vector2 get_linear_velocity ( ) const
Return the body linear velocity. This changes by physics granularity. See set_linear_velocity.
- float get_mass ( ) const
Return the body mass.
- int get_max_contacts_reported ( ) const
Return the maximum contacts that can be reported. See set_max_contacts_reported.
- int get_mode ( ) const
Return the current body mode, see set_mode.
- float get_weight ( ) const
Return the body weight given standard earth-weight (gravity 9.8).
- bool is_able_to_sleep ( ) const
Return true if the body has the ability to fall asleep when not moving. See set_can_sleep.
- bool is_contact_monitor_enabled ( ) const
Return whether contact monitoring is enabled.
- bool is_sleeping ( ) const
Return whether the body is sleeping.
- bool is_using_custom_integrator ( )
Return true if the body is not doing any built-in force integration.
- void set_angular_damp ( float angular_damp )
Set the angular damp for this body. If this value is different from -1, any angular damp derived from the world or areas will be overridden.
- void set_angular_velocity ( float angular_velocity )
Set the body angular velocity. Can be used sporadically, but DON’T SET THIS IN EVERY FRAME, because physics may be running in another thread and definitely runs at a different granularity. Use _integrate_forces as your process loop if you want to have precise control of the body state.
- void set_applied_force ( Vector2 force )
Set the applied force vector. This is the equivalent of pushing a box over the ground: the force applied is applied constantly.
- void set_axis_velocity ( Vector2 axis_velocity )
Set an axis velocity. The velocity in the given vector axis will be set as the given vector length. This is useful for jumping behavior.
- void set_bounce ( float bounce )
Set the body bounciness, from 0 (no bounce) to 1 (full bounce).
- void set_can_sleep ( bool able_to_sleep )
Set the body ability to fall asleep when not moving. This saves an enormous amount of processor time when there are plenty of rigid bodies (non static) in a scene.
Sleeping bodies are not affected by forces until a collision or an apply_impulse / set_applied_force wakes them up. Until then, they behave like a static body.
- void set_contact_monitor ( bool enabled )
Enable contact monitoring. This allows the body to emit signals when it collides with another.
- void set_continuous_collision_detection_mode ( int mode )
Set the continuous collision detection mode from the enum CCD_MODE_*.
Continuous collision detection tries to predict where a moving body will collide, instead of moving it and correcting its movement if it collided. The first is more precise, and misses less impacts by small, fast-moving objects. The second is faster to compute, but can miss small, fast-moving objects.
- void set_friction ( float friction )
Set the body friction, from 0 (frictionless) to 1 (full friction).
- void set_gravity_scale ( float gravity_scale )
Set the gravity factor. This factor multiplies gravity intensity just for this body.
- void set_linear_damp ( float linear_damp )
Set the linear damp for this body. If this value is different from -1, any linear damp derived from the world or areas will be overridden.
- void set_linear_velocity ( Vector2 linear_velocity )
Set the body linear velocity. Can be used sporadically, but DON’T SET THIS IN EVERY FRAME, because physics may be running in another thread and definitely runs at a different granularity. Use _integrate_forces as your process loop if you want to have precise control of the body state.
- void set_mass ( float mass )
Set the body mass.
- void set_max_contacts_reported ( int amount )
Set the maximum contacts to report. Bodies can keep a log of the contacts with other bodies, this is enabled by setting the maximum amount of contacts reported to a number greater than 0.
- void set_mode ( int mode )
Set the body mode, from the MODE_* enum. This allows to change to a static body or a character body.
- void set_sleeping ( bool sleeping )
Set whether a body is sleeping or not. Sleeping bodies are not affected by forces until a collision or an apply_impulse / set_applied_force wakes them up. Until then, they behave like a static body.
- void set_use_custom_integrator ( bool enable )
Pass true to disable the internal force integration (like gravity or air friction) for this body. Other than collision response, the body will only move as determined by the _integrate_forces function, if defined.
- void set_weight ( float weight )
Set the body weight given standard earth-weight (gravity 9.8). Not really useful for 2D since most measures for this node are in pixels.
- bool test_motion ( Vector2 motion, float margin=0.08, Physics2DTestMotionResult result=NULL )
Return whether the body would collide, if it tried to move in the given vector. This method allows two extra parameters: A margin, which increases slightly the size of the shapes involved in the collision detection, and an object of type Physics2DTestMotionResult, which will store additional information about the collision (should there be one).